Sharp XG-PH50X (serv.man18) User Manual / Operation Manual ▷ View online
Connections
29
Connecting with a DVI Digital Cable
The projector employs the DVI digital input terminal for direct input of digital video signals
from a computer.
from a computer.
Note
• When connecting the projector to a computer in this way, select “D. PC RGB” for “Signal Type” in the
“Picture” menu.
• When using the ø3.5 mm mono audio cable, the volume level will be half of when using the ø3.5 mm
stereo audio cable.
Computer
Side view
ø3.5 mm stereo or mono audio cable
(commercially available or available as
Sharp service part QCNWGA038WJPZ)
(commercially available or available as
Sharp service part QCNWGA038WJPZ)
To INPUT 3 terminal
DVI Digital cable
(commercially available)
(commercially available)
To DVI digital
output terminal
output terminal
To audio output
terminal
terminal
To AUDIO input
(2, 3) terminal
(2, 3) terminal
XG-PH50X_Print_E_P24_36.p65
04.11.18, 13:58
29
30
Connecting to Video Equipment
Before connecting, ensure the power cord of the projector from the AC outlet is unplugged,
and that the devices to be connected are turned off. After making all connections, turn on the
projector and then the other devices.
The projector has a DVD digital terminal, computer-RGB/component terminal, S-video termi-
nal and video terminal for video input. Refer to the listed illustrations on how to connect audio-
visual equipment.
If your audio-visual equipment has an RGB output terminal or component output terminal,
use the computer-RGB/component terminals (INPUT 1 or 2) on the projector for video con-
nection.
and that the devices to be connected are turned off. After making all connections, turn on the
projector and then the other devices.
The projector has a DVD digital terminal, computer-RGB/component terminal, S-video termi-
nal and video terminal for video input. Refer to the listed illustrations on how to connect audio-
visual equipment.
If your audio-visual equipment has an RGB output terminal or component output terminal,
use the computer-RGB/component terminals (INPUT 1 or 2) on the projector for video con-
nection.
Connecting to Video Equipment That Has an HDMI Out-
put Terminal with a DVI to HDMI Cable
put Terminal with a DVI to HDMI Cable
Use a DVI to HDMI cable when connecting HDMI video equipment such as DVD players to the
INPUT 3 terminal.
INPUT 3 terminal.
Note
• Select the input signal type of the video equipment. See page 63.
• While the projector is connected to video equipment that has an HDMI output terminal, only the video
signal can be input to the projector. (Connect the AUDIO input (2, 3) terminal for audio input.)
To INPUT 3 terminal
Side view
ø3.5 mm stereo or mono audio cable
(commercially available or available as
Sharp service part QCNWGA038WJPZ)
Sharp service part QCNWGA038WJPZ)
To HDMI output terminal
To AUDIO input
(2, 3) terminal
(2, 3) terminal
DVI to HDMI cable
(commercially available)
(commercially available)
To audio output
terminal
terminal
Video Equipment
XG-PH50X_Print_E_P24_36.p65
04.11.18, 9:53
30
Connections
31
Connecting to Video Equipment That Has a DVI Output
Terminal with a DVI Digital Cable
Terminal with a DVI Digital Cable
Use a DVI Digital cable when connecting video equipment with the DVI output terminal such
as DVD players to the INPUT 3 terminal.
as DVD players to the INPUT 3 terminal.
Note
• Select the input signal type of the video equipment. See page 63.
Side view
To INPUT 3 terminal
DVI Digital cable
(commercially available)
(commercially available)
To audio output
terminal
terminal
To AUDIO input
(2, 3) terminal
(2, 3) terminal
ø3.5 mm stereo or mono audio cable
(commercially available or available as
Sharp service part QCNWGA038WJPZ)
(commercially available or available as
Sharp service part QCNWGA038WJPZ)
To DVI output terminal
Video Equipment
XG-PH50X_Print_E_P24_36.p65
04.11.18, 9:53
31
32
Connecting to RGB Video Equipment with a 5 RCA RGB
Cable
Cable
Use a 5 RCA RGB cable when connecting the RGB video equipment such as DVD players
and DTV* decoders to the INPUT 2 terminals.
* DTV is the umbrella term used to describe the new digital television system in the United
and DTV* decoders to the INPUT 2 terminals.
* DTV is the umbrella term used to describe the new digital television system in the United
States.
Note
• When connecting the projector to the video equipment in this way, select “RGB” for “Signal Type” in the
“Picture” menu. See page 63.
• The HD/C sync and VD terminals may be used depending on the specifications of the DTV decoder
connected to this projector. Please refer to the operation manual of the DTV decoder for details.
Connecting to Video Equipment
Side view
To INPUT 2
terminals
terminals
BNC to RCA adaptors
(commercially available)
(commercially available)
5 RCA RGB cable
(commercially available)
(commercially available)
To BNC to RCA
adaptors
adaptors
To analog RGB
output terminals
output terminals
Video Equipment
To AUDIO input
(2, 3) terminal
(2, 3) terminal
To audio output terminal
ø3.5 mm stereo minijack to
RCA audio cable
(commercially available)
RCA audio cable
(commercially available)
XG-PH50X_Print_E_P24_36.p65
04.11.18, 9:53
32
Click on the first or last page to see other XG-PH50X (serv.man18) service manuals if exist.