DOWNLOAD Sharp XG-PH50X (serv.man18) Service Manual ↓ Size: 10.35 MB | Pages: 109 in PDF or view online for FREE

Model
XG-PH50X (serv.man18)
Pages
109
Size
10.35 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Projector
File
xg-ph50x-sm18.pdf
Date
PREV: Sharp XG-PH50X (serv.man17) Service Manual / Parts Guide

Sharp XG-PH50X (serv.man18) User Manual / Operation Manual ▷ View online

Connections
25
Terminal on the
projector
INPUT 1
INPUT 2
INPUT 3
AUDIO (for INPUT 1)
AUDIO (for INPUT 2, 3)
INPUT 3
INPUT 2
INPUT 1
INPUT 2
Equipment
Computer
Audio-visual
equipment
Terminal on
connected equipment
RGB
output
terminal
DVI digital
video
output
terminal
Audio
output
terminal
HDMI
output
terminal
DVI digital
video
output
terminal
RGB
output
terminal
Component
video
output
terminal
Cable
RGB cable (supplied)
5 BNC to 15-pin D-sub cable (commercially available)
DVI Digital cable (commercially available)
ø3.5 mm stereo or mono audio cable (commercially
available or available as Sharp service part
QCNWGA038WJP)
DVI to HDMI cable (commercially available)
DVI Digital cable (commercially available)
5 RCA RGB cable  (commercially available)
BNC to RCA adaptors (commercially available)
3 RCA to 15-pin D-sub cable (optional: AN-C3CP2)
BNC to RCA adaptors (commercially available)
Component video cable (commercially available)
Samples of Cables for Connection
• For more details of connection and cables, refer to the operation manual of the connecting equipment.
• You may need other cables or connectors not listed below.
XG-PH50X_Print_E_P24_36.p65
04.11.17, 19:23
25
26
Terminal on the
projector
INPUT 4
INPUT 5
AUDIO (for INPUT 1)
AUDIO (for INPUT 2, 3)
AUDIO (for INPUT 4, 5)
OUTPUT
AUDIO OUTPUT
Equipment
Audio-visual
equipment
Monitor
Amplifier
Terminal on
connected equipment
Video
output
terminal
S-video
output
terminal
Audio
output
terminal
RGB
input
terminal
Audio
input
terminal
Cable
Video cable (commercially available)
S-video cable (commercially available)
ø3.5 mm stereo  or mono audio cable (commercially
available or available as Sharp service part
QCNWGA038WJP)
ø3.5 mm stereo minijack to RCA audio cable
(commercially available)
RCA audio cable (commercially available)
RGB cable (supplied or commercially available)
ø3.5 mm stereo minijack to RCA audio cable
(commercially available)
Samples of Cables for Connection
XG-PH50X_Print_E_P24_36.p65
04.11.17, 19:23
26
Connections
27
Connecting to a Computer
Before connecting, ensure the power cord of the projector from the AC outlet is unplugged,
and that the devices to be connected are turned off. After making all connections, turn on the
projector and then the other devices. When connecting a computer, ensure that it is the last
device to be turned on after all the connections are made.
Ensure the operation manuals of the devices to be connected have been read before making connections.
Note
• See page 97 “Computer Compatibility Chart” for a list of computer signals compatible with the projector.
Use with computer signals other than those listed may cause some of the functions to not work.
• Connecting computers other than the recommended types may result in damage to the projector, the
computer, or both.
• A Macintosh adaptor may be required for use with some Macintosh computers. Contact your nearest
Macintosh Dealer.
• Depending on the computer you are using, an image may not be projected unless the signal
output setting of the computer is switched to the external output. Refer to the computer operation
manual for switching the computer signal output settings.
• When connecting the projector to a compatible computer other than a PC (VGA/SVGA/XGA/SXGA/UXGA)
or Macintosh (i.e. Workstation), a separate cable may be needed. Please contact your dealer for more
information.
Connecting with the RGB Cable
RGB cable
Supplied
accessory
Note
• With this connection, the projector is not compatible to the sync on green signals.
• When using the ø3.5 mm mono audio cable, the volume level will be half of when using the ø3.5 mm stereo audio cable.
“Plug and Play” function (when connecting to a 15-pin terminal)
■ This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC com-
patible computer will communicate their setting requirements, allowing for quick and easy setup.
■ Before using the “Plug and Play” function, ensure to turn on the projector first and the connected
computer last.
Note
• The DDC “Plug and Play” function of this projector operates only when used in conjunction with a VESA
DDC compatible computer.
To audio output terminal
To RGB output 
terminal
To INPUT 1 terminal
ø3.5 mm stereo or mono audio cable 
(commercially available or available as Sharp 
service part QCNWGA038WJPZ)
RGB cable
To AUDIO input (1) terminal
Computer
Side view
XG-PH50X_Print_E_P24_36.p65
04.11.17, 19:23
27
28
Connecting with a 5 BNC to 15-pin D-sub Cable
The projector employs a 5 BNC computer input to prevent deterioration of image quality.
When connecting the input terminals on the projector to the computer directly, Connect the
R (P
R
), G/G sync (Y), B (P
B
), HD/C sync and VD cables of the 5 BNC to 15-pin D-sub cable
(commercially available) to the INPUT2 terminals on the projector.
Note
• When using the ø3.5 mm mono audio cable, the volume level will be half of when using the ø3.5 mm
stereo audio cable.
Computer
Side view
ø3.5 mm stereo or mono audio cable 
(commercially available or available as 
Sharp service part QCNWGA038WJPZ)
To INPUT 2 terminals 
5 BNC to 15-pin D-sub cable 
(commercially available)
To AUDIO input 
(2, 3) terminal 
To audio output 
terminal
To RGB output 
terminal
Connecting to a Computer
XG-PH50X_Print_E_P24_36.p65
04.11.17, 19:23
28
Page of 109
Display

Click on the first or last page to see other XG-PH50X (serv.man18) service manuals if exist.

RANDOM: