DOWNLOAD Sharp XG-P20XE (serv.man4) Service Manual ↓ Size: 1.38 MB | Pages: 35 in PDF or view online for FREE

2-1. Detach the intake cover.
2-2. Loosen the screw and slide the lamp cover out of position.
2-3. Remove the three screws and lift the lamp unit out of position.

3-1. Remove the six screws off the terminal board at the back.
3-2. Remove the six screws and detach the rear body.

2-1

2-3

3-2

3-2

2-2

3-1

Lamp Cover

Rear Body

Lamp Unit

Intake Cover

4-1. Remove the five screws.
4-2. Remove the four screws.
4-3. Press on both sides of the set and undo the hooks. Lift the top body with lens shift knob and disconnect the

two connectors.

4-1

4-1

4-1

4-2

Lens Shift Knob

Top Body

4-3

4-3

4-3

4-3

5-1. Undo the top hooks and detach the GYRO PWB.
5-2. Disconnect the connectors from the GYRO PWB.
5-3. Remove the five screws and detach the PC I/F unit.
5-4. Disconnect the five connectors.
5-5. Remove the two screws and detach the output sub-PWB.
5-6. Disconnect the twelve connectors.
5-7. Take out the hexagonal supports.
5-8. Remove the three screws and detach the output/input PWB assembly.

(RP)

(BP)

(GP)

(FF)

(FD)

(LF)

(F)

(AZ)

(SO)

(Q)

(GP)

(D)(FR)

(EA)

(FE)

5-7

5-5

5-8

5-2

5-1

5-3

5-6

5-4

GYRO PWB

Output/Input
PWB Ass'y

Output Sub PWB

PC I/F Unit

5-9. Fit part 

a

 of the input PWB to the slit of the bottom cover.

5-10. Align the input PWB’s shield with the top of the AC inlet shield (

b

).

5-11. Before tightening up the screws (5-7) as well as the screws and hex nuts (5-8), move the PWB unit forward

enough (

c

).

PWB Unit Ass'y