DOWNLOAD Sharp XG-MB67X (serv.man18) Service Manual ↓ Size: 4.22 MB | Pages: 69 in PDF or view online for FREE

On-screen Display (confirmation message)

• Do not unplug the power cord during projec-

tion or cooling fan operation. This can cause
damage due to rise in internal temperature,
as the cooling fan also stops.

R

STANDBY
button

Power indicator

STANDBY/ON button

Press SSTANDBY/ON on the pro-
jector or eSTANDBY on the re-
mote control, then press that but-
ton again while the confirmation
message is displayed, to put the
projector into standby mode.

• The power indicator on the projector

blinks in green while cooling.

• The power indicator changes to red when

the projector finishes cooling.

XG-MB67X_EN2_CD_h

06.5.12, 6:45 AM

29

After turning on the projector, the Setup
Guide screen appears to assist you with
projector setup.

Press TENTER to exit the Setup Guide
screen.

Guidance items
1 FOCUS
2 HEIGHT ADJUST
3 ZOOM

STANDBY/ON
button

ENTER button

You can adjust the focus with the focus
ring on the projector.

Setup Guide screen

• The Setup Guide screen automatically high-

lights the items in the following order:

1 FOCUS

3 ZOOM

4 ENTER

2 HEIGHT ADJUST

However, you can adjust the focus, height
(angle), or zoom regardless of the highlighted
item.

• If you do not want to display the Setup Guide

for the next time, set “Menu” - “SCR - ADJ” -
“Setup Guide” to “Off”. (See page 

Focus ring

You can adjust the screen size using
the zoom ring on the projector.

Zoom ring

XG-MB67X_EN2_CD_h

06.5.12, 6:46 AM

30

The height of the projector can be ad-
justed using the adjustment feet at the
front and rear of the projector.
When the screen is above the projec-
tor, the projection image can be made
higher by adjusting the projector.

• Do not apply too much pressure on the pro-

jector when the front adjustment foot comes
out.

• When lowering the projector, be careful not to

get your fingers caught in the area between
the adjustment foot and the projector.

• Hold the projector firmly while lifting or carry-

ing.

• Do not hold by the lens area.

• The projector is adjustable ±1 degree

from the standard position.

• The angle of projection is adjustable up

to 8 degrees from the surface on which
the projector is placed.

HEIGHT
ADJUST lever

Rear adjustment foot

• When adjusting the height of the projector,

trapezoidal distortion occurs. Follow the pro-
cedures in Keystone Correction to correct the
distortion. (See pages 

Make small
adjustments.

XG-MB67X_EN2_CD_h

06.5.12, 6:46 AM

31

PressC INPUT 1, C INPUT 2,
DINPUT 3 or EINPUT 4 on the remote
control to select the input mode.

• When pressing INPUT (P/R) on the projector,

input mode switches in the following order:

INPUT1

INPUT2

INPUT3

INPUT4

.

• When “Auto Search” is set to “On”, INPUT (P/

R) on the projector functions as the Auto Search
buttons. (See page 

Select the appropriate input mode for
the connected equipment.

Press K/L on the remote control or
–O/Q+ on the projector to adjust the vol-
ume.

• Pressing K/–O will lower the volume.
• Pressing L/Q+ will raise the volume.
• When the projector is connected to external

equipment, the volume level of the external equip-
ment changes in accordance with the volume
level of the projector. Set the projector’s volume
to the lowest level when turning the projector on/
off or when changing the input signal.

• When you do not want to output the sound from

the projector’s speaker while the projector is con-
nected to external equipment, set “Speaker” in
“PRJ-ADJ” menu to “Off”. (See page 

Press MAV MUTE on the remote con-
trol to temporarily display a black
screen and turn off the sound.

• Pressing MAV MUTE again will turn the projected

image back on.

Volume buttons

INPUT
buttons

AV MUTE button

On-screen Display

On-screen Display

XG-MB67X_EN2_CD_h

06.5.12, 6:46 AM

32