DOWNLOAD Sharp XG-MB67X (serv.man18) Service Manual ↓ Size: 4.22 MB | Pages: 69 in PDF or view online for FREE

Press P or R and select “Bright”
to adjust.

• The selected item is highlighted.

• Press hENTER again to return to the

previous screen.

Press  O or Q to adjust the item
selected.

• The adjustment is stored.

Press BMENU/HELP.

• The menu screen will disappear.

0

Bright

Picture

SEL./ADJ.

Rtn. Menu

END

Picture Mode

Contrast

0

1 5

0

0

K

8 5 0 0

Bright

Red

Blue

1

CLR Temp

Bright Boost

Lamp Setting

Standard

Bright

Reset

SEL./ADJ.

Single ADJ

END

Picture

SCR

PRJ

Net.

Help

Picture Mode

Contrast

0

0

0

0

K

8 5 0 0

Bright

Red

Blue

CLR Temp

Bright Boost

Lamp Setting

Standard

Bright

Reset

SEL./ADJ.

Single ADJ

END

Resize

Image Shift

0

0

Keystone

Auto Keystone

Off

Normal

1

Picture

SCR

PRJ

Net.

Help

Pict.

SCR - ADJ

PRJ

Net.

Help

Items to be adjusted

• Menu buttons do not function while the projector is operating the “Auto Sync”, “Break Time”,

“FREEZE”, or “AV MUTE” functions.

Press hENTER.

• The selected item (e.g. “Bright”) is dis-

played by itself at the bottom of the
screen.

• When pressing P or R, the following item

(“Red” after “Bright”) will be displayed.

The item displayed by itself

XG-MB67X_EN2_CD_i

06.5.12, 6:47 AM

41

Selectable

items

Standard

Presentation

Movie

Game

*sRGB

Q Example: “Picture” screen menu for

INPUT 1 (RGB) mode

Q Example: “Picture” screen menu for

INPUT 3 mode

Picture Mode

Contrast

0

0

0

0

K

8 5 0 0

Bright

Red

Blue

1

CLR Temp

Bright Boost

Lamp Setting

Standard

Bright

Reset

SEL./ADJ.

ENTER

END

Picture

SCR

PRJ

Net.

Help

Description

For standard image

Brightens portions of image for
more enhanced presentations.

Gives natural tint to the
projected image.

Gives sharpness to the
projected image.

For high fidelity reproduction of
images from a computer.

Picture Mode

Contrast

0

0

0

0

K

8 5 0 0

Bright

Color

Tint

0

Sharp

1

CLR Temp

Bright Boost

Progressive

3D Progressive

Standard

Reset

SEL./ADJ.

ENTER

END

Picture

SCR

PRJ

Net.

Help

Lamp Setting

Bright

Menu operation n Page 

• You can also press G PICTURE MODE on the remote control to select the picture mode. (See

• *sRGB is an international standard of color reproduction regulated by the IEC (International

Electrotechnical Commission). As the fixed color area has been decided by the IEC, the images are
displayed in a natural tint based on an original image, when “sRGB” is selected.
For additional information about the sRGB function, visit “http://www.srgb.com/”.
You cannot set the items, “Red”, “Blue”, “CLR Temp”, “Bright Boost”, when “sRGB” is selected.

1 

1 

1 

1 

1 Selecting the Picture Mode

• When “sRGB” is selected, the projected image may become dark, but this does not indicate a

malfunction.

• “sRGB” is displayed only when RGB signal is input.
• You can set or adjust each item in the “Picture” menu to your preference. Any changes you make are

retained in memory.

CLR Temp

8500K

8500K

6500K

8500K

–

Lamp Setting

Bright

Bright

Eco + Quiet

Bright

Bright

The default settings of each item when selecting Picture Mode

Bright Boost

1

2

0

2

–

XG-MB67X_EN2_CD_j

06.5.12, 6:48 AM

42

4

4

4

4

4 Progressive

• In NTSC or PAL60Hz, even if the 3D Progres-

sive mode has been set, the three-two pull
down enhancement will be enabled automati-
cally when the film source has been entered.

• When the image is blurred or noisy, switch to

the optimal mode.

• When using progressive inputs, inputs are di-

rectly displayed so that 2D Progressive, 3D
Progressive and Film Mode cannot be se-
lected.

* The film source is a digital video recording with the

original encoded as is at 24 frames/second. The
projector can convert this film source to progres-
sive video at 60 frames/second with NTSC and
PAL60Hz or at 50 frames/second with PAL50Hz
and SECAM to play back a high-definition image.

Selectable

items

2D
Progressive

3D
Progressive

Film Mode

Description

Useful to display fast-moving images
such as sports.

Useful to display relatively slow-
moving images such as drama and
documentary more clearly.

Reproduces the image of film source*
clearly. Displays the optimized image of
film transformed with three-two pull down
(NTSC and PAL60Hz) or two-two pull
down (PAL50Hz and SECAM) enhance-
ment to progressive mode images.

5

5

5

5

5 Lamp Setting

Select-

able

items

Eco +

Quiet

Bright

Bright-

ness

Approx.

80%

100%

Power

consumption
(When using

AC 110V)

308W

385W

Lamp Life

Approx.

3,000
hours

Approx.

2,000
hours

Fan

sound

Low

Normal

• When “Lamp Setting” is set to “Eco+Quiet”,

the power consumption will decrease and the
lamp life will extend. (Projection brightness
decreases approximately 20%.)

2

2

2

2

2 Adjusting the Image

*1 Not adjustable/selectable when selecting

“sRGB”.

*2 Not displayed in the RGB input mode.
*3 “Tone” will appear on the menu screen only when

PAL or SECAM signals are input (including when
forcibly changed to those input signals). There is
basically no need to adjust “Tone”, but you can
adjust the picture tone with this adjustment when
inputting PAL or SECAM signals .

Q button

For more
contrast.

For more
brightness.

For stronger red.

For stronger
blue.

For more color
intensity.

For making skin
tones greenish.

For more
sharpness.

For more
vividness.

Adjustment

Items

Contrast

Bright

Red*

1

Blue*

1

Color*

2

Tint*

2 

*

3

Sharp*

2

Bright Boost*

1

O button

For less
contrast.

For less
brightness.

For weaker red.

For weaker
blue.

For less color
intensity.

For making skin
tones purplish.

For less
sharpness.

For high fidelity
color reproduc-
tion.

• “Bright Boost” and “CLR Temp” cannot be set

when “sRGB” is selected.

• To reset all adjustment items, select “Reset”

and press hENTER.

3

3

3

3

3 Adjusting the Color

• Values on “CLR Temp” are only for general

standard purposes.

Selectable

items

5500K
6500K
7500K
8500K
9300K
10500K

Description

For lower color temperature for
warmer, reddish incandescent-like
images.

For higher color temperature for
cooler, bluish, fluorescent-like images.

Menu operation n Page 

P
R

XG-MB67X_EN2_CD_j

06.5.12, 6:48 AM

43

Pict.

Resize

Image Shift

0

0

SCR - ADJ

PRJ

Net.

Keystone

Auto Keystone

OSD Display

Background

Setup Guide

PRJ Mode

Language

Front

English

On

Logo

On

Off

Normal

SEL./ADJ.

ENTER

END

Help

8

7

6

5

4

3

2

1

1

1

1

1

1 Setting the Resize Mode

• For details of the Resize mode, see pages 

• You can also press HRESIZE on the remote

control to set the resize mode. (See page 

2

2

2

2

2 Adjusting the Image

You can move the projected image vertically.

Q button

• You cannot set this item when “Resize” is set

to “Normal”.

O button

Menu operation n Page 

3

3

3

3

3 Keystone Correction

When the image is projected either from the top
or from the bottom towards the screen at an
angle, the image becomes distorted
trapezoidally. The function for correcting trap-
ezoidal distortion is called Keystone Correction.

For Manual Keystone Correction

For Auto Keystone Correction

O button

Q button

• The Keystone Correction can be adjusted up

to an angle of approximately ±13 degrees with
the “Auto Keystone” and up to an angle of
approximately ±13 degrees with the manual
“Keystone” (when “Resize” is set to “Normal”).

 for details of Keystone Correction.

XG-MB67X_EN2_CD_j

06.5.12, 6:48 AM

44