Sharp XG-MB67X (serv.man18) User Manual / Operation Manual ▷ View online
45
Useful
Features
The projector can switch the on-screen display
language among 11 languages.
language among 11 languages.
Selectable items
Front
Ceiling + Front
Rear
Ceiling + Rear
Description
Normal image (Projected from
the front of the screen)
the front of the screen)
Inverted image (Projected
from the front of the screen
with an inverted projector)
from the front of the screen
with an inverted projector)
Reversed image (Projected
from the rear of the screen or
with a mirror)
from the rear of the screen or
with a mirror)
Reversed and inverted image
(Projected with a mirror)
(Projected with a mirror)
6
6
6
6
6 Selecting the Setup
Guide
8
8
8
8
8 Selecting the On-screen
Display Language
Selectable items
On
Off
Description
Displaying the Setup Guide
when turning the projector on.
when turning the projector on.
Not displaying the Setup
Guide.
Guide.
7
7
7
7
7 Reversing/Inverting
Projected Images
English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
4
4
4
4
4 Setting the On-screen
Display
Menu operation n Page
40
Selectable
items
On
Off
Description
All On-screen Displays are displayed.
INPUT/VOLUME/AV MUTE/FREEZE/
AUTO SYNC/RESIZE/PICTURE MODE/
“An invalid button has been pressed.”
are not displayed.
AUTO SYNC/RESIZE/PICTURE MODE/
“An invalid button has been pressed.”
are not displayed.
5
5
5
5
5 Selecting the Background
Image
Selectable items
Logo
Blue
None
Description
Sharp logo screen
Blue screen
—
See page
19
for details of Projection (PRJ) Mode.
XG-MB67X_EN2_CD_j
06.5.12, 6:48 AM
45
46
Adjusting the Projector Function (“PRJ - ADJ” menu)
Auto Search
Auto Sync
Auto Power Off
System Sound
System Lock
h
On
On
On
On
SEL./ADJ.
ENTER
END
0
Lamp Timer(Life)
100%
Pict.
SCR
PRJ - ADJ
Net.
Help
Speaker
On
RS-232C
9600 bps
Fan Mode
Normal
Disable
1
1
1
1
1 Auto Search Function
This function automatically searches for and
switches to the input mode in which signals are
being received, when the projector is turned on,
or when the INPUT button is pressed.
switches to the input mode in which signals are
being received, when the projector is turned on,
or when the INPUT button is pressed.
When “Auto Search” is set to “On”
• If two or more input signals are found, the pro-
• If two or more input signals are found, the pro-
jector selects the input source in the order of
INPUT 1 n INPUT 2 n INPUT 3 n INPUT 4
when you press INPUT (P/R) on the projector.
INPUT 1 n INPUT 2 n INPUT 3 n INPUT 4
when you press INPUT (P/R) on the projector.
• While “Auto Search” is set to “On”, press
C INPUT 1,C INPUT 2, D INPUT 3 or
EINPUT 4 on the remote control to select
an input mode other than the input mode se-
lected by the projector.
EINPUT 4 on the remote control to select
an input mode other than the input mode se-
lected by the projector.
Note
2
2
2
2
2 Auto Sync (Auto Sync
Adjustment)
Menu operation n Page
40
• Auto Sync adjustment is also performed by
pressing F AUTO SYNC on the remote con-
trol.
trol.
• The Auto Sync adjustment may take some time
to complete, depending on the image of the
computer connected to the projector.
computer connected to the projector.
• When the optimum image cannot be achieved
with Auto Sync adjustment, use manual ad-
justments. (See page
justments. (See page
51
.)
Note
Selectable items
On
Off
Description
Auto Sync adjustment will
occur when the projector is
turned on or when the input
signals are switched, when
connected to a computer.
occur when the projector is
turned on or when the input
signals are switched, when
connected to a computer.
Auto Sync adjustment is not
automatically performed.
automatically performed.
• When the Auto Power Off function is set to
“On”, 5 minutes before the projector enters
standby mode, the message “Enter STANDBY
mode in X min.” will appear on the screen to
indicate the remaining minutes.
standby mode, the message “Enter STANDBY
mode in X min.” will appear on the screen to
indicate the remaining minutes.
Selectable
items
On
Off
Description
When no input signal is detected for
more than 15 minutes, the projector will
automatically enter standby mode.
more than 15 minutes, the projector will
automatically enter standby mode.
The Auto Power Off function will be
disabled.
disabled.
Note
3
3
3
3
3 Auto Power Off
Function
5
5
5
5
5 Speaker Setting
Selectable
items
On
Off
Description
The audio signal is output from the
internal speaker.
internal speaker.
The audio signal is not output from the
internal speaker.
internal speaker.
4
4
4
4
4 Setting the Confirmation
Sound (System Sound)
Selectable
items
On
Off
Description
A confirmation sound is made when
the projector turns on/off.
the projector turns on/off.
No confirmation sound is made.
XG-MB67X_EN2_CD_j
06.5.12, 6:48 AM
46
47
Useful
Features
Info
This function prevents unauthorized use of the
projector. Once this function is activated, users
must enter the correct keycode each time the
projector is turned on. We suggest you record
the keycode in a safe place where only au-
thorized users have access.
projector. Once this function is activated, users
must enter the correct keycode each time the
projector is turned on. We suggest you record
the keycode in a safe place where only au-
thorized users have access.
• If you lose or forget your keycode, contact your
nearest Sharp Authorized Projector Dealer or
Service Center (see page
Service Center (see page
61
). Even if the prod-
uct warranty is valid, the keycode reset will
incur a charge.
incur a charge.
Select “System Lock”, then press
hENTER or Q.
hENTER or Q.
• The screen for entering the keycode
appears.
1
8
8
8
8
8 System Lock Function
7
7
7
7
7 Fan Mode Setting
Menu operation n Page
40
This function changes the fan rotation speed.
Selectable
items
Normal
High
Description
Suitable for normal environments.
Select this when using the projector at
altitudes of approximately 1,500
meters (4,900 feet) or more.
altitudes of approximately 1,500
meters (4,900 feet) or more.
6
6
6
6
6 Selecting the Transmission
Speed (RS-232C)
Make sure that both the projector and computer
are set for the same baud rate.
are set for the same baud rate.
Selectable
items
9600bps
115200bps
Description
Transmission speed is slow.
Transmission speed is rapid.
P
R
R
9
9
9
9
9 Checking the Lamp Life
Status
You can confirm the cumulative lamp usage time
and the remaining lamp life (percentage).
and the remaining lamp life (percentage).
• It is recommended that the lamp be changed
when the remaining lamp life becomes 5%.
• The lamp life may vary depending on the us-
age condition.
Lamp usage condition
Operated exclusively
with Lamp Setting set to
“Eco +Quiet”
with Lamp Setting set to
“Eco +Quiet”
Operated exclusively
with Lamp Setting set to
“Bright”
with Lamp Setting set to
“Bright”
100%
Approx.
3,000
hours
3,000
hours
Approx.
2,000
hours
2,000
hours
5%
Approx.
150 hours
150 hours
Approx.
100 hours
100 hours
Remaining lamp life
Note
“Life”
a Setting/Changing the keycode
When “Fan Mode” is set to “High”, the fan rotation
speeds up, and the fan noise becomes louder.
speeds up, and the fan noise becomes louder.
Press the 4 buttons on the remote
control or on the projector to en-
ter the preset keycode in “Old
Code”.
control or on the projector to en-
ter the preset keycode in “Old
Code”.
• When setting the keycode for the first
time, press R on the projector for four
times.
times.
Setting the System Lock
PRJ - ADJ
Old Code
New Code
Reconfirm
– – – –
– – – –
– – – –
2
• If you input a wrong keycode, the cursor
returns to the first point of the “Old Code”.
• The preset keycode is 4 R buttons on
the projector. When you press the R but-
ton four times, the keycord input screen
disappears.
ton four times, the keycord input screen
disappears.
Note
XG-MB67X_EN2_CD_k
06.5.12, 6:49 AM
47
48
Input screen for keycode
• You can not use the following buttons for
keycode:
• S STANDBY/ON
• f ON
• e STANDBY
• h ENTER
• l RETURN
• B MENU/HELP
• S STANDBY/ON
• f ON
• e STANDBY
• h ENTER
• l RETURN
• B MENU/HELP
• System lock function recognizes each
button on the remote control or on the
projector as an individual button, even
if they share the same button name. If
you used the buttons on the projector
in setting your keycode, the keycode
cannot be canceled with the remote
control.
projector as an individual button, even
if they share the same button name. If
you used the buttons on the projector
in setting your keycode, the keycode
cannot be canceled with the remote
control.
Press the 4 buttons on the remote
control or on the projector to en-
ter the new keycode in “New
Code”.
control or on the projector to en-
ter the new keycode in “New
Code”.
3
Note
Menu operation n Page
40
Locking the Operation
Buttons on the Projector
(Keylock Function)
Buttons on the Projector
(Keylock Function)
Use this function to lock the operation
buttons on the projector.
buttons on the projector.
a Taking the Keylock off
Hold down T ENTER on the projector for
about 5 seconds.
about 5 seconds.
ROn-screen Display
a Locking the Operation Buttons
Hold down T ENTER on the projector for
about 5 seconds while the projector is being
turned on.
about 5 seconds while the projector is being
turned on.
ROn-screen Display
• The keylock function does not affect the op-
eration with the remote control buttons.
• You cannot use the keylock function while the
projector is warming up.
• When the projector is in standby mode, you
can release the keylock by holding down
T ENTER and S STANDBY/ON on the pro-
jector simultaneously for about 5 seconds.
T ENTER and S STANDBY/ON on the pro-
jector simultaneously for about 5 seconds.
• Keylock does not function while the projector
is: displaying the “Setup Guide” or “Menu”
screens, in standby mode, warming up,
changing input signals, operating “Auto Sync”
function, in “FREEZE” mode or on the “Sys-
tem Lock” screen during warming up.
screens, in standby mode, warming up,
changing input signals, operating “Auto Sync”
function, in “FREEZE” mode or on the “Sys-
tem Lock” screen during warming up.
Info
Adjusting the Projector Function (“PRJ - ADJ” menu) (Continued)
Note
To cancel the keycode that you have already
set
set
• Press R on the projector for four times in steps
2 and 3 above.
When the System Lock is set
• When System Lock is set, the keycode input
screen appears after the power is turned on.
When it appears, enter the right keycode to
start projection.
When it appears, enter the right keycode to
start projection.
Enter the same keycode in “Re-
confirm”.
confirm”.
Setting the System Lock
PRJ - ADJ
Old Code
New Code
Reconfirm
* * * *
–
– – –
– – – –
System Lock
– – – –
4
XG-MB67X_EN2_CD_k
06.5.12, 6:50 AM
48
Click on the first or last page to see other XG-MB67X (serv.man18) service manuals if exist.