DOWNLOAD Sharp XG-MB67X (serv.man18) Service Manual ↓ Size: 4.22 MB | Pages: 69 in PDF or view online for FREE

■ When turning off the projector, the cooling fan

runs to decrease the internal temperature for
a while. Unplug the power cord after the cool-
ing fan stops. The period the cooling fan runs
will vary, depending on the circumstances and
the internal temperature.

■ When using the projector, be sure not to sub-

ject it to hard impact and/or vibration, as this
can result in damage. Take extra care with
the lens. Before moving the projector, be sure
to unplug the power cord from the wall outlet,
and disconnect any other cables connected
to it.

■ Do not carry the projector by holding the lens.

■ When storing the projector, re-attach the lens

cap. (See page 

■ Do not expose the projector to direct sunlight

or place next to heat sources. Doing so may
affect the cabinet color or cause deformation
of the plastic cover.

■ When connecting a computer or other audio-

visual equipment to the projector, make the
connections AFTER unplugging the power
cord of the projector from the AC outlet and
turning off the equipment to be connected.

■ Please read the operation manuals of the pro-

jector and the equipment to be connected for
instructions on how to make the connections.

• The cooling fan regulates the internal tem-

perature, and its performance is automatically
controlled. The sound of the fan may change
during projector operation due to changes in
the fan speed. This does not indicate malfunc-
tion.

• Do not unplug the power cord during projec-

tion or cooling fan operation. This can cause
damage due to rise in internal temperature,
as the cooling fan also stops.

■ The power supply voltage and the shape of

the plug may vary depending on the region
or country you are using the projector in.
When using the projector overseas, be sure
to use an appropriate power cord for the coun-
try you are in.

■ If the projector starts to overheat due to setup

problems or blockage of the air vents, “

” and

“

” will illuminate in the lower left corner

of the picture. If the temperature continues to
rise, the lamp will turn off, the temperature warn-
ing indicator on the projector will blink, and after
a 90-second cooling-off period the projector will
enter standby mode. Refer to “Maintenance In-
dicators” on page 

 for details.

XG-MB67X_EN2_CD_b

06.5.12, 6:39 AM

9

Please download Adobe

®

 Reader

®

 from the Internet (http://www.adobe.com).

• If the desired pdf file cannot be opened by double clicking the mouse, start Adobe

®

 Reader

®

 first,

then specify the desired file using the “File”, “Open” menu.

1 Insert the CD-ROM in the CD-ROM drive.
2 Double click the “My Computer” icon.
3 Double click the “CD-ROM” drive.
4 When you want to view the operation

manual
1) Double click the “MANUALS” folder.
2) Double click the language (name of the

folder) that you want to view.

3) Double click the “MB67_” pdf file to ac-

cess the projector manuals.

When you want to view the SETUP
MANUAL
1) Double click the “SETUP” folder.
2) Double click the language (name of the

folder) that you want to view.

3) Double click the “MB67_S” pdf file to ac-

cess the SETUP MANUAL.

1 Insert the CD-ROM in the CD-ROM drive.
2 Double click the “CD-ROM” icon.
3 When you want to view the operation

manual
1) Double click the “MANUALS” folder.
2) Double click the language (name of the

folder) that you want to view.

3) Double click the “MB67_” pdf file to ac-

cess the projector manuals.

When you want to view the SETUP
MANUAL
1) Double click the “SETUP” folder.
2) Double click the language (name of the

folder) that you want to view.

3) Double click the “MB67_S” pdf file to ac-

cess the SETUP MANUAL.

Connecting Pin Assignments .................................................. 2
RS-232C Specifications and Commands ................................ 3
Setting up the Projector Network Environment ....................... 7
Controlling the Projector via LAN .......................................... 13
Setting up the Projector Using RS-232C or Telnet ............... 18
Troubleshooting ..................................................................... 28

XG-MB67X_EN2_CD_b

06.5.12, 6:39 AM

10

Remote control

RRMCGA398WJSA

Two R-6 batteries

 (“AA” size, UM/SUM-3,

HP-7 or similar)

Power cord*

RGB cable

(10' (3.0 m))

QCNWGA045WJPZ

• Operation manual (this manual (TINS-C517WJZZ) and CD-ROM (UDSKAA078WJZZ))

■ Dust filter
■ 3 RCA to 15-pin D-sub cable (10n (3.0 m))
■ Remote receiver
■ Lamp unit

AN-DF1

AN-C3CP2

AN-MR2

AN-XR20LP

For U.S. and

Canada, etc.

(6' (1.8 m))

QACCDA007WJPZ

For Europe,

except U.K.

(6' (1.8 m))

QACCVA011WJPZ

For U.K. and

Singapore

(6' (1.8 m))

QACCBA036WJPZ

For Australia, New

Zealand and Oceania

(6' (1.8 m))

QACCLA018WJPZ

(1)

(2)

(3)

(4)

* Use the power cord that corresponds to the wall outlet in your country.

• Some of the optional accessories may not be available depending on the region. Please check with

your nearest Sharp Authorized Projector Dealer or Service Center.

Lens cap (attached)

CCAPHA024WJSA

DIN-D-sub RS-232C adaptor

(5 

57

/

64

"

 (15 cm))

QCNWGA015WJPZ

XG-MB67X_EN2_CD_c

06.5.24, 1:51 PM

11

STANDBY/
ON button
For turning the
power on and
putting the
projector into
standby
mode.

Lamp indicator

Temperature warning
indicator

Adjustment buttons
(P/R/O/Q)
For selecting menu items.

Volume buttons
(–O/Q+)
For adjusting the speaker
sound level.

ENTER button
For setting
items selected
or adjusted on
the menu.

MENU/HELP button
For displaying
adjustment and
setting screens, and
help screen.

Focus ring
For adjusting
the focus.

INPUT button (P/R)
For switching input mode
1, 2, 3 or 4.

Remote control
sensor

HEIGHT
ADJUST
lever

Numbers in 

Z

 refer to the main pages in this operation manual where the topic

is explained.

KEYSTONE
button
For entering
the Keystone
Correction
mode.

Intake vent

Power
indicator

Zoom ring
For enlarging/
reducing the picture.

Push both sides of the lens cap
to attach or remove.

XG-MB67X_EN2_CD_c

06.5.12, 6:40 AM

12