Sharp PG-C20XE (serv.man22) User Manual / Operation Manual ▷ View online
Operation
22
Using the Wireless Mouse
Remote Control/Mouse Receiver Positioning
• The remote control can be used to control the projector within the ranges shown below.
• The remote mouse receiver can be used with the remote control to control the mouse functions of a connected
• The remote mouse receiver can be used with the remote control to control the mouse functions of a connected
computer within the ranges shown below.
• The signal from the remote control can be reflected off a screen for easy operation. However, the effective distance of the
signal may differ due to the screen material.
Operating the Wireless Mouse from the Remote Control
Controlling the Projector
Using as a Wireless Mouse
• When MOUSE is pressed, the buttons on the remote
control light up and the remote control enters MOUSE
mode.
mode.
• During MOUSE mode, the cursor can be used as the
pointer. MOUSE mode is for about ten seconds while
the buttons are lighting.
the buttons are lighting.
• When MENU or ENLARGE is pressed, MOUSE mode
is released to the normal mode.
• Be sure the supplied remote mouse receiver is
connected to your computer.
• The wireless mouse may not operate correctly if your
computer serial port is not correctly set up. Refer to the
computer’s operation manual for details of setting up/
installing the mouse driver.
computer’s operation manual for details of setting up/
installing the mouse driver.
• For one-button mouse systems, use either the LEFT-CLICK
or RIGHT-CLICK button.
Effective buttons in MOUSE mode
Remote control
(Front view)
Remote control
(Rear view)
Mouse
RIGHT-CLICK
AV MUTE
LEFT-CLICK
MOUSE
30˚
45˚
7 m
30˚
45˚
30˚
Remote control
Remote
mouse
receiver
mouse
receiver
4 m
30˚
30˚
120˚
Remote control
Remote control
Operation
23
ON/OFF
POWER
LAMP
TEMP.
KEYSTONE
INPUT
BACK
ENTER
MENU
AUTO SYNC
7
2, 4, 6
3, 5
1, 8
Using the
GUI
(Graphical User Interface) Menu Screens
(GUI) On-screen Display
1
INPUT 1 (RGB) mode
4
This projector has three sets of menu screens (INPUT 1 (RGB), INPUT 1 (COMPONENT) and INPUT 2 (S-VIDEO)
or 3 (VIDEO)) that allow you to adjust the image and various projector settings. These menu screens can be
operated from the projector or the remote control with the following buttons.
or 3 (VIDEO)) that allow you to adjust the image and various projector settings. These menu screens can be
operated from the projector or the remote control with the following buttons.
s
1
INPUT 1 (COMPONENT) mode
4
s
1
INPUT 2 (S-VIDEO) or 3 (VIDEO) mode
4
s
1 Press MENU to display the main menu.
2 Press ∂/ƒ to select an adjustment item in the main menu.
2 Press ∂/ƒ to select an adjustment item in the main menu.
3 Press ENTER to display the sub menu.
4 Press ∂/ƒ to select an adjustment item in the sub menu.
5 Press ENTER to activate the selected adjustment item.
4 Press ∂/ƒ to select an adjustment item in the sub menu.
5 Press ENTER to activate the selected adjustment item.
6 Press ∂/ƒ to adjust the item.
7 Press BACK to return to the previous screen.
8 Press MENU to exit from the GUI.
7 Press BACK to return to the previous screen.
8 Press MENU to exit from the GUI.
• For details on items on the menu screen, see the tree charts on pages 24 and 25.
Projector
Remote control
Operation
24
Items on the INPUT 1 (RGB) Mode Menu Bar
Using the GUI (Graphical User Interface) Menu Screens
Main menu
Main menu
Sub menu
Sub menu
Fine Sync
Options
Signal Info
Lamp Timer
Language
English
PRJ Mode
Ceiling
ⳭFront
Ceiling
ⳭRear
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
Front
Rear
Special Modes
480P
640
⳯480
Keystone
Auto Power Off
Background
Phase
Clock
H-Pos
V-Pos
Reset
Contrast
Picture
Bright
Red
Blue
Reset
Power Save Mode
ON
OFF
OFF
Blue
None
Ⳮ127
ⳮ127
Ⳮ120
ⳮ120
Ⳮ127
ⳮ127
Ⳮ50
ⳮ50
Ⳮ50
ⳮ50
Ⳮ30
ⳮ30
Ⳮ30
ⳮ30
Ⳮ30
ⳮ30
Ⳮ30
ⳮ30
ON
Options
Signal Info
Lamp Timer
Language
English
PRJ Mode
Ceiling
ⳭFront
Ceiling
ⳭRear
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
Front
Rear
Keystone
Auto Power Off
Background
Contrast
Picture1
Bright
Red
Color
Picture2
Tint
Sharp
Reset
Blue
Reset
Power Save Mode
Special Modes
480P
640
⳯480
ON
OFF
OFF
Blue
None
Ⳮ127
ⳮ127
Ⳮ30
ⳮ30
Ⳮ30
ⳮ30
Ⳮ30
ⳮ30
Ⳮ30
ⳮ30
Ⳮ30
ⳮ30
7
0
Ⳮ30
ⳮ30
ON
Items on the INPUT 1 (COMPONENT)
Mode Menu Bar
Mode Menu Bar
Operation
25
Items on the INPUT 2 (S-VIDEO) or INPUT 3 (VIDEO)
Mode Menu Bar
Mode Menu Bar
Main menu
Sub menu
Options
Signal Info
Lamp Timer
Language
English
PRJ Mode
Ceiling
ⳭFront
Ceiling
ⳭRear
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
Front
Rear
Keystone
Auto Power Off
Background
Contrast
Picture1
Bright
Red
Color
Picture2
Tint
Sharp
Reset
Blue
Reset
Power Save Mode
Video System
Auto
PAL
NTSC3.58
SECAM
NTSC4.43
PAL M
PAL N
PAL (60Hz)
ON
OFF
OFF
Blue
None
Ⳮ127
ⳮ127
Ⳮ30
ⳮ30
Ⳮ30
ⳮ30
Ⳮ30
ⳮ30
Ⳮ30
ⳮ30
Ⳮ30
ⳮ30
Ⳮ30
ⳮ30
ON
7
0
Using the GUI (Graphical User Interface) Menu Screens
• “Tint” does not appear when receiving “PAL”, “SECAM”, “PAL M”, “PAL N“ or “PAL (60Hz)” in the INPUT 2 (S-VIDEO) or
INPUT 3 (VIDEO) mode.
Click on the first or last page to see other PG-C20XE (serv.man22) service manuals if exist.