DOWNLOAD Sharp PG-C20XE (serv.man22) Service Manual ↓ Size: 5.27 MB | Pages: 55 in PDF or view online for FREE

Computer RGB cable

Computer audio cable

Remote control

Two AAA size batteries

CD-ROM

LCD projector operation manual

LCD projector quick reference
guides

DIN-D-sub RS-232C cable

USB mouse control cable

PS/2 mouse control cable

Remote mouse receiver

Lens cap

Extra air filter

Lens cap strap

• The configuration of wall outlets differs from country to country. Use the power cord that corresponds to the wall outlet in your

country.

Power cord

For Europe, Hong Kong and Singapore

For Australia, New Zealand, and Oceania

(For Europe, except U.K.)

(For U.K., Hong Kong and Singapore)

Plug the supplied power cord into the AC socket on the back of the projector.

Power cord

• Make sure you connect the power cord firmly into the AC  socket.

• The configuration of wall outlets differs from country to country. Use the power cord that corresponds to the wall outlet in your

country.

COMPUTER

COMPUTER

AUDIO

AUDIO

OUTPUT 

(INPUT 1)

INPUT 1

RS-232C

You can connect your projector to a computer for projection of full colour computer images.

1 Connect one end of the supplied computer RGB cable

to the COMPUTER INPUT 1 port on the projector.

2 Connect the other end to the Monitor output port on the

computer. Secure the connectors by tightening the
thumb screws.

3 To use the built-in audio system, connect one end of

the supplied computer audio cable to the AUDIO INPUT
1 terminal on the projector.

4 Connect the other end to the Audio output terminal on

the computer.

• Before connecting, be sure to turn both the projector and the

computer off. After making all connections, turn the projector
on first. The computer should always be turned on last.

• Please read the computer’s operation manual carefully.
• Refer to page 47 “Computer Compatibility Chart” for a list of

computer signals compatible with the projector. Use with
computer signals other than those listed may cause some of
the functions not to work.

• A Macintosh adaptor may be required for use with some

Macintosh computers. Contact your nearest Sharp Authorised
LCD Projector Dealer or Service Centre.

Computer audio cable

Computer RGB cable

When connecting the projector to a compatible computer other than an IBM-PC (VGA/SVGA/XGA/SXGA) or
Macintosh (i.e. Workstation), a separate cable may be needed. Please contact your dealer for more information.

• Connecting computers other than the recommended types may result in damage to the projector, the computer, or both.

• This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC compatible

computer will communicate their setting requirements, allowing for quick and easy setup.

• Before using the “Plug and Play” function, be sure to turn on the projector first and the connected computer last.

• The DDC, Plug and Play function of this projector operates only when used in conjunction with a VESA DDC compatible computer.

You can connect your projector to a VCR, laser disc player, DVD player, DTV* decoder and other audiovisual
equipment.

• Always turn off the projector while connecting to audiovisual equipment, in order to protect both the projector and the

equipment being connected.

1 Connect one end of the S-video cable to the S-VIDEO

INPUT 2 terminal, or one end of the video cable to the
VIDEO INPUT 3 terminal on the projector and the video
output terminal on the video source.

2 To use the built-in audio system, connect the red and

white RCA connectors to the corresponding red and
white AUDIO INPUT terminals on the projector and the
audio output terminals on the video source.

The S-VIDEO INPUT 2 terminal uses a video signal system
in which the picture is separated into a colour and a
luminance signal to realise a higher-quality image.

• For higher quality video, you may use the S-VIDEO INPUT 2 terminal on

the projector. S-video cable is sold separately.

• If your video equipment does not have an S-video output terminal, use

the composite video output terminal.

1 Video cable (sold separately)

2 Audio cable (sold separately)

To audio output terminals

To video output terminal

To S-video output terminal

S-video cable (sold separately)

L

R

AUDIO INPUT

INPUT 3

INPUT 2

S-VIDEO

VIDEO

(S-VIDEO, VIDEO INPUT)

*DTV is the umbrella term used to describe the new digital television system in the united states.