Sharp PG-C20XE (serv.man22) User Manual / Operation Manual ▷ View online
Useful Features
34
ON/OFF
POWER
LAMP
TEMP.
KEYSTONE
INPUT
BACK
ENTER
MENU
AUTO SYNC
2, 3, 4
2, 3
1, 5
This function allows you to check the current input signal
information and the accumulated lamp usage time.
information and the accumulated lamp usage time.
1 Press MENU.
2 Press ∂/ƒ to select “Options”, and then press
ENTER. The current input signal information and
the lamp usage time will be displayed.
the lamp usage time will be displayed.
• It is recommended that the lamp be replaced after
approximately 900 hours of usage. See pages 40 and 41
for lamp replacement.
for lamp replacement.
Checking the Input Signal and the Lamp Usage Time
(GUI) On-screen Display
When no input signal is detected for more than 15
minutes, the projector will automatically shut off.
minutes, the projector will automatically shut off.
Description of Automatic Power Shutoff
1 Press MENU.
2 Press ∂/ƒ to select “Options”, and then press
ENTER.
3 Press ∂/ƒ to select “Auto Power Off”, and then
press ENTER.
4 Press ∂/ƒ to select “ON” or “OFF”.
5 To exit from the GUI, press MENU.
• “Auto Power Off” is factory preset to “ON”.
Automatic Power Shutoff Function
(GUI) On-screen Display
Projector
Remote control
Projector
Remote control
ON/OFF
POWER
LAMP
TEMP.
KEYSTONE
INPUT
BACK
ENTER
MENU
AUTO SYNC
2
2
1
Power automatically shuts off after 15 minutes without
a signal being input.
a signal being input.
Automatic Power Shutoff disabled.
ON
OFF
Useful Features
35
Function with toggle switch to control the quantity of
projected light. Select “ON” or “OFF” to decrease or
increase brightness, power consumption and fan noise.
projected light. Select “ON” or “OFF” to decrease or
increase brightness, power consumption and fan noise.
Description of Power Save Modes
Selecting a
Background
Image
This function allows you to select the image displayed
when no signal is being sent to the projector.
when no signal is being sent to the projector.
Description of Background Images
1 Press MENU.
2 Press ∂/ƒ to select “Options”, and then press
ENTER.
3 Press ∂/ƒ to select “Background”, and then
press ENTER.
4 Press ∂/ƒ to select “Blue” or “None”.
5 To exit from the GUI, press MENU.
Blue
None
Projector
Remote control
(GUI) On-screen Display
Power Save Mode Function
Projector
Remote control
(GUI) On-screen Display
ON/OFF
POWER
LAMP
TEMP.
KEYSTONE
INPUT
BACK
ENTER
MENU
AUTO SYNC
2, 3, 4
2, 3
1, 5
Blue screen
Black screen
ON/OFF
POWER
LAMP
TEMP.
KEYSTONE
INPUT
BACK
ENTER
MENU
AUTO SYNC
2, 3, 4
2, 3
1, 5
Quantity of light is 70%.
Power consumption is 200 W.
Power consumption is 200 W.
Quantity of light is 100%.
Power consumption is 230 W.
Power consumption is 230 W.
1 Press MENU.
2 Press ∂/ƒ to select “Options”, and then press
ENTER.
3 Press ∂/ƒ to select “Power Save Mode”, and
then press ENTER.
4 Press ∂/ƒ to select “ON” or “OFF”.
5 To exit from the GUI, press MENU.
• “Power Save Mode” is factory preset to “OFF” .
• When selecting “OFF“ in “Power Save Mode”, fan noise is
• When selecting “OFF“ in “Power Save Mode”, fan noise is
increased.
• Even when selecting “ON” in “Power Save Mode“, fan noise
may increase if internal temperature rises enough to activate
the cooling function.
the cooling function.
ON
OFF
Useful Features
36
Reverse/Invert Image Function
This projector is equipped with a reverse/invert image
function which allows you to reverse or invert the pro-
jected image for various applications.
function which allows you to reverse or invert the pro-
jected image for various applications.
Description of Projected Images
Projector
Remote control
(GUI) On-screen Display
Selected item
Front
Ceiling
ⳭFront
Rear
Ceiling
ⳭRear
Projected image
Normal image
Inverted image
Reversed image
Reversed and inverted image
1 Press MENU.
2 Press ∂/ƒ to select “PRJ Mode”, and then press
ENTER.
3 Press ∂/ƒ to select the desired projection mode,
and then press ENTER.
4 To exit from the GUI, press MENU.
• This function is used for the reversed image and ceiling-
mount setups. See page 19 for these setups.
ON/OFF
POWER
LAMP
TEMP.
KEYSTONE
INPUT
BACK
ENTER
MENU
AUTO SYNC
2, 3
2, 3
1, 4
Ordinarily, the type of input signal is detected and the
correct resolution mode is automatically selected.
However, since the projector cannot distinguish
640
correct resolution mode is automatically selected.
However, since the projector cannot distinguish
640
⳯480 signal resolution on computers or 480P on
DTVs, select an appropriate mode on “Special Modes.”
1 Press MENU.
2 Press ∂/ƒ to select “Special Modes”, and then
press ENTER.
3 Press ∂/ƒ to select the optimal resolution mode.
4 Press ENTER to save the setting.
5 To exit from the GUI, press MENU.
• When inputting DTV 480P signals, select “480P” in step
3
above.
Projector
Remote control
(GUI) On-screen Display
Special Mode Adjustment
ON/OFF
POWER
LAMP
TEMP.
KEYSTONE
INPUT
BACK
ENTER
MENU
AUTO SYNC
2, 3
2, 4
1, 5
Maintenance &
Tr
oubleshooting
37
Maintenance &
Troubleshooting
Troubleshooting
Air Filter Maintenance
• This projector is equipped with an air filter to ensure the optimal
operating condition of the projector.
• The air filter should be cleaned every 100 hours of use. Clean the
filters more often when the projector is used in a dusty or smoky
location.
location.
• Have your nearest Sharp Authorised LCD Projector Dealer or
Service Centre exchange the filter (PFILD0123CEZZ) when it is no
longer possible to clean it.
longer possible to clean it.
Cleaning the air filter
Right Side View
Air filter
1
Disconnect the power cord.
Unplug the power cord from the AC socket.
2
Remove the filter cover.
Turn over the projector. Press the tab and remove
the filter cover in the direction of the arrow.
the filter cover in the direction of the arrow.
Tab
Click on the first or last page to see other PG-C20XE (serv.man22) service manuals if exist.