Sharp MX-ST10 Service Manual ▷ View online
MX-ST10 DISASSEMBLY AND ASSEMBLY 6 - 2
3)
Removed the shift unit. (Circled section)
Remove two screws. While lowering the front side of the shift
unit, remove the unit. (The guide pin is in the rear side.)
Remove two screws. While lowering the front side of the shift
unit, remove the unit. (The guide pin is in the rear side.)
2. Transport unit disassembly procedures
1)
Remove the three screws, and remove the top cover.
Guide pin
Shift unit
MX-ST10 DISASSEMBLY AND ASSEMBLY 6 - 3
2)
When attaching the cover, insert the projection of the cover
into the hole and attach.
into the hole and attach.
3)
Disconnect the connector in the rear side.
4)
Remove the screws in the right side.
MX-ST10 DISASSEMBLY AND ASSEMBLY 6 - 4
5)
Remove the screw in the upper side.
6)
Remove the two screws, and remove the lever.
7)
Remove the screw, and remove the knob.
8)
Remove the transport unit.
3. Bypass unit disassembly procedures
1)
Disconnect the connector.
MX-ST10 DISASSEMBLY AND ASSEMBLY 6 - 5
2)
Remove the four screws.
3)
Remove the bypass unit.
Click on the first or last page to see other MX-ST10 service manuals if exist.