Sharp MX-M850 (serv.man37) Service Manual ▷ View online
MX-M1100 SIMULATION 7 – 73
66-34
Purpose
Operation test, check
Function (Purpose) Used to measure the communication time
of the send test image data.
Section
FAX
Operation/Procedure
The send test is performed and the send time is measures and dis-
played. (Unit: ms)
The send test is performed and the send time is measures and dis-
played. (Unit: ms)
66-36
Purpose
Operation test, check
Function (Purpose) Used to perform the interface check
between the MFP controller and the
MDMC. (Data line or command line check)
MDMC. (Data line or command line check)
Section
FAX
Operation/Procedure
1)
1)
Select a target item for the operation check with the touch
panel key.
panel key.
2)
Press [EXECUTE] key.
If "(once)" is selected, when check is completed normally, "OK"
is displayed. When there occurs an error, "NG" is displayed.
If "(repeat)" is selected, check is repeated until the result is
found "NG" or until [EXECUTE] key is pressed.
If "(once)" is selected, when check is completed normally, "OK"
is displayed. When there occurs an error, "NG" is displayed.
If "(repeat)" is selected, check is repeated until the result is
found "NG" or until [EXECUTE] key is pressed.
66-39
Purpose
Setting
Function (Purpose) Used to set the destination.
Section
Section
FAX
Operation/Procedure
Select a destination with the touch panel key.
Select a destination with the touch panel key.
66-42
Purpose
Setting
Function (Purpose) Used to rewrite the power control program
again to the FAX BOX.
Section
FAX
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
Press [YES] key.
When writing the program is completed normally, "OK" is dis-
played. When writing is failed, "NG" is displayed.
When writing the program is completed normally, "OK" is dis-
played. When writing is failed, "NG" is displayed.
66-43
Purpose
Setting
Function (Purpose) Used to write the adjustment value of the
power control program to the FAX BOX.
Section
FAX
Operation/Procedure
1)
1)
Select a target item to be set with [
↑] [↓] keys.
2)
Enter a set value with 10-key.
3)
Press [EXECUTE] key.
When writing the adjustment value is completed normally,
"OK" is displayed. When it fails, "NG" is displayed.
When writing the adjustment value is completed normally,
"OK" is displayed. When it fails, "NG" is displayed.
66-60
Purpose
Adjustment/ Setting
Function (Purpose) Used to register the ACR data.
When calling, the carrier prefix is added to
the dial number to provide the auto select
function of low-price line to the user.
* To use this simulation, the FAX soft SW
24-4 and 24-5 must be set to [FUNCTION
ON] and [Register Enable].
the dial number to provide the auto select
function of low-price line to the user.
* To use this simulation, the FAX soft SW
24-4 and 24-5 must be set to [FUNCTION
ON] and [Register Enable].
Section
Operation/Procedure
1)
1)
Select a target item of print with [
↑] [↓] keys.
2)
Press the ACR data item button to be changed.
3)
Enter the ACR data with 10-key.
4)
Press [SET] key to save the value.
MFP
← MDMC (DATA once)
Data line once only
MFP
→ MDMC (DATA once)
Data line once only
MFP
← MDMC (DATA repeat)
Data line repeat
MFP
→ MDMC (DATA repeat)
Data line repeat
MFP
← MDMC (CMD once)
Command line once only
MFP
→ MDMC (CMD once)
Command line once only
MFP
← MDMC (CMD repeat)
Command line repeat
MFP
→ MDMC (CMD repeat)
Command line repeat
Item
Set range
Default
A
CI_LEVEL_JUDGE
2 - 15
3
B
CI_CYCLE_MIN
1 - 254
10
C
CI_CYCLE_MAX
2 - 255
142
D
CI_COUNT
2 - 15
3
E
POFF_LEVEL_JUDGE
2 - 15
15
F
EXHS_LEVEL_JUDGE
2 - 255
240
G
RHS_LEVEL_JUDGE
2 - 15
2
H
SON_TIMEOUT
1 - 127
20
Item
Key display
Data kind
Default
Number of digits
Display of number entry title line
1
Local Carrier Num
Local carrier prefix
Null
max. 6
Local Carrier Number
Long Carrier Num
Long carrier prefix
Null
max. 6
Long-distance Carrier Number
Over Carrier Num
International carrier prefix
Null
max. 6
Overseas Carrier Number
Bypass Num
Bypass Number
9999
max. 4
Bypass Number
User Area Code
User area code
Null
max. 6
User Area Code
Machine Code
Machine code
0617
max. 4
Machine Code
Version
Version number
100
max. 4
Version
2
Thru Num. 1
Through number 1
120
max. 4
Though Number1
Thru Num. 2
Through number 2
140
max. 4
Though Number2
Thru Num. 3
Through number 3
150
max. 4
Though Number3
Thru Num. 4
Through number 4
160
max. 4
Though Number4
Thru Num. 5
Through number 5
170
max. 4
Though Number5
Thru Num. 6
Through number 6
180
max. 4
Though Number6
Thru Num. 7
Through number 7
190
max. 4
Though Number7
MX-M1100 SIMULATION 7 – 74
67
67-24
Purpose
Adjustment/ Setting
Function (Purpose) Used to set for auto color calibration. For
FIERY option support, Sim is not displayed.
Section
Operation/Procedure
1)
1)
Press [EXECUTE] key.
The high density process control is started, and the self print is
outputted.
The high density process control is started, and the self print is
outputted.
2)
Place the printed self print patch on the glass table, and select
a process mode with [FACTORY] [SERVICE] keys on the
touch panel.
a process mode with [FACTORY] [SERVICE] keys on the
touch panel.
3)
Press [EXECUTE] key. After scanning the patch, the self print
of 16 patches is printed.
of 16 patches is printed.
4)
Press [OK] key.
The correction print is saved, and the reference value registra-
tion is processed.
The correction print is saved, and the reference value registra-
tion is processed.
67-25
Purpose
Adjustment/ Setting
Function (Purpose) Used to set the printer engine color balance
manual correction. For FIERY option sup-
port, the Sim is not displayed.
port, the Sim is not displayed.
Section
Operation/Procedure
1)
1)
Select an adjustment item with [
↑] [↓] keys.
2)
Enter the set value with 10-key.
3)
Press [OK] key. (The set value is saved.)
67-27
Purpose
Adjustment/ Setting
Function (Purpose) Used to register the scanner target value of
the printer engine auto density adjustment.
For FIERY option support, this Sim is not
displayed.
For FIERY option support, this Sim is not
displayed.
Section
Operation/Procedure
1)
1)
Press [SETUP] key.
2)
Place the self print patch printed with Sim. 67-25 on the glass
table, and press [EXECUTE] key.
table, and press [EXECUTE] key.
3)
Press [OK] key.
The target value is saved.
The target value is saved.
2
Thru Num. 8
Through number 8
20
max. 4
Though Number8
Thru Num. 9
Through number 9
30
max. 4
Though Number9
3
Thru Num. 10
Through number 10
330
max. 4
Though Number10
Thru Num. 11
Through number 11
360
max. 4
Though Number11
Thru Num. 12
Through number 12
40
max. 4
Though Number12
Thru Num. 13
Through number 13
450
max. 4
Though Number13
Thru Num. 14
Through number 14
50
max. 4
Though Number14
Thru Num. 15
Through number 15
570
max. 4
Though Number15
Thru Num. 16
Through number 16
60
max. 4
Though Number16
Thru Num. 17
Through number 17
70
max. 4
Though Number17
4
Thru Num. 18
Through number 18
750
max. 4
Though Number18
Thru Num. 19
Through number 19
80
max. 4
Though Number19
Thru Num. 20
Through number 20
840
max. 4
Though Number20
Thru Num. 21
Through number 21
90
max. 4
Though Number21
Thru Num. 22
Through number 22
990
max. 4
Though Number22
Res. Thur Num.1
Reserve through number 1
Null
max. 4
Reseve Though Number
Res. Thur Num.2
Reserve through number 2
Null
max. 4
Reseve Though Number2
Res. Thur Num.3
Reserve through number 3
Null
max. 4
Reseve Though Number3
5
Res. Thur Num.4
Reserve through number 4
Null
max. 4
Reseve Though Number4
Res. Thur Num.5
Reserve through number 5
Null
max. 4
Reseve Though Number5
Res. Thur Num.6
Reserve through number 6
Null
max. 4
Reseve Though Number6
Res. Thur Num.7
Reserve through number 7
Null
max. 4
Reseve Though Number7
Res. Thur Num.8
Reserve through number 8
Null
max. 4
Reseve Though Number8
Item
Key display
Data kind
Default
Number of digits
Display of number entry title line
Item
Display name
Setting range
Default value
A
POINT1
1 - 99
50
B
POINT2
1 - 99
50
C
POINT3
1 - 99
50
D
POINT4
1 - 99
50
E
POINT5
1 - 99
50
F
POINT6
1 - 99
50
G
POINT7
1 - 99
50
H
POINT8
1 - 99
50
I
POINT9
1 - 99
50
J
POINT10
1 - 99
50
K
POINT11
1 - 99
50
L
POINT12
1 - 99
50
M
POINT13
1 - 99
50
N
POINT14
1 - 99
50
O
POINT15
1 - 99
50
P
POINT16
1 - 99
50
Item
Display Content
B
Point B target value
C
Point C target value
D
Point D target value
E
Point E target value
F
Point F target value
G
Point G target value
H
Point H target value
I
Point I target value
J
Point J target value
K
Point K target value
L
Point L target value
M
Point M target value
N
Point N target value
O
Point O target value
BASE
Background sampling value
Item
Display name
Setting range
Default value
MX-M1100 SIMULATION 7 – 75
67-28
Purpose
Adjustment/ Setting
Function (Purpose) Used to reset the printer engine auto
adjustment scanner target value to the
default value.
default value.
Section
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
Press [YES] key.
The engine auto adjustment scanner target value is reset to
the default value.
The engine auto adjustment scanner target value is reset to
the default value.
67-31
Purpose
Data clear
Function (Purpose) Used to clear the printer calibration value.
For FIERY option support, the Sim is not
displayed.
displayed.
Section
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
Press [YES] key.
The printer calibration value is cleared.
The printer calibration value is cleared.
67-32
Purpose
Adjustment/ Setting
Function (Purpose) Printer screen gamma table setting (300/
600DPI). When supporting the FIERY
option, Sim is not displayed.
option, Sim is not displayed.
Section
Operation/Procedure
1)
1)
Select a target item with [
↑] [↓] keys on the touch panel.
2)
Enter the set value with 10-key.
3)
Press [OK] key.
The set value is saved.
The set value is saved.
67-33
Purpose
Adjustment/ Setting
Function (Purpose) Used to perform the gamma correction of
printer screens (for PCL). For FIERY option
support, the Sim is not displayed.
support, the Sim is not displayed.
Section
Operation/Procedure
1)
1)
Select an adjustment target color with [K] [C] [M] [Y] keys on
the touch panel.
the touch panel.
2)
Select a target item with [SCREEN] key.
3)
Select an adjustment item with [
↑] [↓] keys.
4)
Enter the set value with 10-key.
5)
Press [OK] key.
The set value is saved.
The set value is saved.
<Items selected by SCREEN>
67-34
Purpose
Adjustment/ Setting
Function (Purpose) Used to set Enable/Disable of the printer
half-tone max. density correction.
Section
Operation/Procedure
1)
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value is saved.
The set value is saved.
Item
Display
Content
Setting
range
Default
value
A
STANDARD
GAMMA TABLE
(600DPI)
GAMMA TABLE
(600DPI)
Standard gamma table
setting 600DPI
setting 600DPI
1 - 3
1
B
STANDARD
GAMMA TABLE
(1200DPI)
GAMMA TABLE
(1200DPI)
Standard gamma table
setting 1200DPI
setting 1200DPI
1 - 3
1
Item
Display
Description
Setting
range
Default
value
A
POINT1
Point 1
0 - 255
128
B
POINT2
Point 2
0 - 255
128
C
POINT3
Point 3
0 - 255
128
D
POINT4
Point 4
0 - 255
128
E
POINT5
Point 5
0 - 255
128
F
POINT6
Point 6
0 - 255
128
G
POINT7
Point 7
0 - 255
128
H
POINT8
Point 8
0 - 255
128
I
POINT9
Point 9
0 - 255
128
J
POINT10
Point 10
0 - 255
128
K
POINT11
Point 11
0 - 255
128
L
POINT12
Point 12
0 - 255
128
M
POINT13
Point 13
0 - 255
128
N
POINT14
Point 14
0 - 255
128
O
POINT15
Point 15
0 - 255
128
P
POINT16
Point 16
0 - 255
128
Display
Content
SCREEN1
600dpi Gamma1
SCREEN2
600dpi Gamma2
SCREEN3
600dpi Gamma3
SCREEN4
600dpi toner save
SCREEN5
1200dpi Gamma1
SCREEN6
1200dpi Gamma2
SCREEN7
1200dpi Gamma3
SCREEN8
1200dpi toner save
Item
Display
Content
Setting
range
Default
value
A
0: ENABLE
1: DISABLE
1: DISABLE
0
Engine max.
density correction
mode: Enable
density correction
mode: Enable
0 - 1
1
1
Engine max.
density correction
mode: Disable
density correction
mode: Disable
Item
Display
Description
Setting
range
Default
value
MX-M1100 SIMULATION 7 – 76
4. Soft switch (Detail of Sim. 66-1)
A. Soft switch list
SW
No.
No.
Bit
No.
System
settings
Item
SW selection and function
Initial value
Remarks
1
1 - 8
Country code
1
North America
* For codes of
* For codes of
the other
countries, refer
to the page of
SIM 66-2
setting.
countries, refer
to the page of
SIM 66-2
setting.
0
1
1
0
1
0
1
1
1
0
1
0
1
2
1
Operation
settings
settings
Change from the image
send screen to the copy
screen
send screen to the copy
screen
1: Change over
0: Do not change over
"1": Change over
(North America)
"0": Do not change
over (Other country)
(North America)
"0": Do not change
over (Other country)
2 - 5
Operation
settings
settings
Image quality priority
selection (standard image
quality setting)
selection (standard image
quality setting)
Ordinary lettering
0 0 0 0
0
Ordinary lettering
Small lettering
0 0 0 1
0
Fine
0 0 1 0
0
Very fine
0 0 1 1
0
Small lettering, medium
tone
tone
0 1 0 1
Fine, medium tone
0 1 1 0
Very fine, medium tone
0 1 1 1
6
Operation
settings
settings
Image quality setting when
saving (FAX)
saving (FAX)
1: Apply
0: Do not apply
0
Do not apply
7, 8
Not used
0
0
0
3
1
Operation
settings
settings
Received data printing hold
(FAX/Internet Fax)
(FAX/Internet Fax)
1: Hold
0: Do not hold
0
Do not hold
2, 3
FAX initial
setting
setting
Tone/Pulse initial setting
(Dial call signal setting)
(Dial call signal setting)
10PPS (Pulese)
0 0
1
TONE
20PPS
0 1
0
TONE
1 0
Same action as initial
value
value
1 1
4
FAX initial
setting
setting
Auto startup mode
1: Release
0: Setting
0
Setting
5 - 8
FAX initial
setting
setting
Pause time setting
(between dials)
(between dials)
Binary input
Setting range 1 to 15 seconds (1 second intervals)
Setting range 1 to 15 seconds (1 second intervals)
"0100": 4 seconds
(South Africa)
"0010": 2 seconds
(Other country)
(South Africa)
"0010": 2 seconds
(Other country)
When set to "0000,"
the default value is
set.
the default value is
set.
4
1, 2
FAX initial
setting
setting
Speaker volume when on-
hook (Speaker volume
during DTMF sending)
hook (Speaker volume
during DTMF sending)
Small
0 1
1
Medium
Medium
1 0
0
Large
1 1
3, 4
FAX initial
setting
setting
Call sound volume
No sound
0 0
1
Medium
Small
0 1
0
Medium
1 0
Large
1 1
5, 6
FAX initial
setting
setting
Line monitor volume setting
No sound
0 0
"00": No sound
(U.K./France/
Germany/Rusia)
"10": Medium
(Other country)
(U.K./France/
Germany/Rusia)
"10": Medium
(Other country)
Small
0 1
Medium
1 0
Large
1 1
7, 8
FAX initial
setting
setting
Volume of the transmission
completion sound (Volume
of the successful
transmission sound)
completion sound (Volume
of the successful
transmission sound)
No sound
0 0
1
Medium
Small
0 1
0
Medium
1 0
Large
1 1
5
1, 2
FAX initial
setting
setting
Volume of the
communication error
completion sound (Volume
of the transmission and
reception error sound)
communication error
completion sound (Volume
of the transmission and
reception error sound)
No sound
0 0
1
Medium
Small
0 1
0
Medium
1 0
Large
1 1
3, 4
FAX initial
setting
setting
Volume of the reception
completion sound (Volume
of the reception completion
sound)
completion sound (Volume
of the reception completion
sound)
No sound
0 0
1
Medium
Small
0 1
0
Medium
1 0
Large
1 1
5, 6
FAX initial
setting
setting
Tone of the successful
transmission sound
transmission sound
Pattern 1 (550Hz)
0 0
1
Pattern 3
(1000Hz)
(1000Hz)
Pattern 2 (750Hz)
0 1
0
Pattern 3 (1000Hz)
1 0
Pattern 4 (1700Hz)
1 1
Click on the first or last page to see other MX-M850 (serv.man37) service manuals if exist.