Sharp MX-M654N / MX-M754N (serv.man2) Handy Guide ▷ View online
SHARP
MAINTENANCE
17
Interval Checklist
Description
Every
400K*
Every
800K*
Process Section:
(When the Total Maintenance counter has reached the life specified).
X
Replace Black Developer (MX-754GV).
X
Replace Black Drum (MX-754DR)
Replace Main Charger Kit (MX-754MK)
Drum Cleaning Blade.
Side Seal F/R.
Drum Separator Pawl Unit.
Main Charge Unit
Drum Separator Pawl x 4
Drum Gear
Sub Blade
Check/Replace Waste Toner Collector (MX-700HB).
Replace Ozone Filter Kit (MX-754FL).
Ozone Filter
Dv Ozone Filter
Toner Filter
DV Filter AS
X
Sim 24-05
Clear DV_K (Black) Counter.
X
Sim 24-04
Clear DRUM K (Black) Counter.
Clear MAIN CHARGER K (Black) Counter.
Clear MC CLEAN K (Black) Counter.
Clear DRUM BLADE K (Black) Counter.
Clear MAINTENANCE [ALL] Counter.
Clear OZONE FILTER Counter.
X
Sim 25-02* Toner Concentration Auto Adjustment - Select K.
Note* When Sim 25-02 is executed, the Developer Counter
(Sim 24-05) is also cleared automatically.
X
Caution:
Ensure the toner cartridge is removed, prior to executing Sim 25-02.
Ensure the toner cartridge is removed, prior to executing Sim 25-02.
Image Quality Adjustments - ALL (After Replacement Described Above):
Sim 44-02
Image Density & Registration Sensor Adjustment.
Sim 44-06
Process Control execution.
Sim 46-74
Automatic Half Tone Calibration Adjustment (Copy & Printer).
Sim 46-02
Check/Adjust Copy Exposure Density (B/W).
Paper Feed & Transport:
Check/Clean Paper Dust Removal Unit.
Check/Clean all Paper Path Sensors (including Duplex unit).
Check/Clean/Replace PF Rollers (check tray counter using Sim 22-09).
Sim 24-04
Clear PS PAPER Counter.
General:
Clean all optics, CCD, and white reference plate.
MAINTENANCE
SHARP
18
Every
400K*
Every
800K*
DSPF:
Check/Clean Paper Feed Roller, Pick-Up Roller & Separation Roller.
Replace when each counter value reaches 100K or after 1 year.
Replace when each counter value reaches 100K or after 1 year.
X
Replace Torque Limiter when DSPF paper feed counter reaches 800K
Check/Clean ALL Sensors & CIS Unit.
Fuser Section:
In addition to Total K maintenance if indicated:-
Replace Heat Roller Kit (MX-754HK)
Upper Heat Roller
Upper Heat Roller Bearing x 2
Upper Heat Roller Insulation Bush x 2
Upper Heat Roller Gear
Upper Separation Pawl x 6
Upper Separation Pawl Spring x 6
Lower Heat Roller
Lower Heat Roller Bearing x 2
Lower Separation Pawl x 2
Lower Separation Pawl Spring x 2
Apply Grease UKOG-0235FCZZ
to UHR & LHR sleeve
Replace Web Cleaning Kit (MX-754WB)
Upper Web Roller
Upper Web Backup Roller
Upper Web Backup Roller bearing x 2
Upper Web Pressure Spring x 2
Lower Web Roller
Lower Web Backup Roller
Lower Web Backup Roller Bearing x 2
Lower Web Pressure Spring x 2
Check & Clean Upper and Lower Thermistors.
Sim 24-04
Clear FUSING ROLLER Counter.
Clear PRESS ROLLER Counter.
Clear SEPARATE PAWL (L) Counter.
Clear SEPARATE PAWL (U) Counter.
Clear FUSING WEB (U) Counter.
Clear FUSING WEB (L) Counter.
Transfer Section:
Replace Primary Transfer Kit (MX-754TT)
Transfer belt
Transfer roller
Transfer operation gear
Transfer CL gear
Transfer roller bearing x 2
Sim 24-04
Clear TC BELT Counter.
Clear TC ROLLER Counter.
Clear TC CL ROLLER Counter
SHARP
MAINTENANCE
19
Every
400K
Every
800K
Every
3000K MX-CF11 Inserter
Check/Clean Inserter Pick Up Roller, Separation Roller & Feed Belt - Replace
when Individual Inserter Feed (Tray1 & Tray 2) counters reach 60k :-
when Individual Inserter Feed (Tray1 & Tray 2) counters reach 60k :-
[0PQB4772225// x 1, 0PQA8061295A/ x1, 0PQA8592241// x 1]
Clean Drive & Follower Rollers
MX-FD10 Folding Unit
Clean slowdown timing sensor reflection mirror
Clean release timing sensor reflection mirror
Clean upper stopper paper sensor reflection mirror
Clean fold position sensor reflection mirror
Check/Clean all Transport Rollers & Paper Guides
X
X
Replace Folding front lower roller clutch 1 & 2 when the Folding Unit counter
reaches 1000k :-
reaches 1000k :-
X
X
Replace Folding/spacing solenoid when Individual Folding counter reaches
1000k
1000k
X
X
Replace Through/folding branching flapper solenoid when the Folding Unit
counter reaches 2000k :-
counter reaches 2000k :-
MX-TM10 Trimmer Unit
Replace Paddle solenoid when Trimmer counter reaches 120K.
Replace Discharge Needle when Trimmer counter reaches 120K.
Replace Cutter Unit when Trimmer counter reaches 50K cuts (@ 80gsm).
X
X
Replace Trimmer when counter reaches 1200K (@ 80gsm)
MX-FN22 Saddle Finisher (4K)
X
X
Replace Saddle Adjustment Roller every 1000K bundles:-
[0CWFC874950// x 4]
X
X
Replace Saddle Roller every 1000K bundles:-
[0CWFL320100// x 2]
OPERATING SYSTEM SUPPORT
SHARP
20
MX-M654N
MX-M754N
Windows Client
Windows Server
Apple OSX
8.1
8
7, Vista
2008
2008R2
2012
2012R2
10.8
10.9
10.9
10.10
32/64
32/64
32/64
32/64
64
64
64
Sharp Advanced
Printer Language
PCL5
PCL6
WHQL 02/15
WHQL 02/15
WHQL 02/15
WHQL 02/15
WHQL 02/15
WHQL 02/15
WHQL 02/15
PS
WHQL 02/15
WHQL 02/15
WHQL 02/15
WHQL 02/15
WHQL 02/15
WHQL 02/15
WHQL 02/15
PPD
WHQL 02/15
WHQL 02/15
WHQL 02/15
WHQL 02/15
WHQL 02/15
WHQL 02/15
WHQL 02/15
GPD (PCL)
XPS
*V
WHQL
PC-Fax
*1
*1
*1
*1
*1
*1
*1
Sharpdesk v3.3
Composer
SAP
Use SH1DJ020 (PCL) or SH1HJ020 (PS) Device Type
Airprint (Native)
Button Manager
Twain Scan
[Network]
WHQL 02/15
WHQL 02/15
WHQL 02/15
WHQL 02/15
WHQL 02/15
WHQL 02/15
WHQL 02/15
Scan to
Sharpdesk v3.3
Scan to Folder
*3
Scan to FTP
Sharp OSA
Network Scan Tool
*2
*2
*2
*2
*2
*2
*2
SRDM
Notes:
*1
MX-FX11 is required.
*2
MX-AMX2 is required – Client (Host) is not supported on Windows Server OS.
*3
Supported on Mac OSX 10.4 to 10.9 therefore, operation is not guaranteed.
*V
XPS Driver is only supported on Windows Vista (32/64bit) - MX-PUX1 & 1GB Additional RAM are
required.
Click on the first or last page to see other MX-M654N / MX-M754N (serv.man2) service manuals if exist.