Sharp MX-M364N / MX-565N Handy Guide ▷ View online
Grey Balance & Density Adjustment
SHARP
Document Solution Centre
13
PRINTER DENSITY CHECK:
Sim 64-05
[PCL Printer]
Sim 64-06
[PS Printer]
SERVICE TARGET SETTING:
Sim 63-07
[for Engine]
Sim 67-27
[for Printer]
Scan Test Pattern to Register Custom Service Target
DEFAULT SETTING (Service Mode):
To return machine to “Standard” setting:-
STANDARD SERVICE TARGET SETTING:
[Execute]
Sim 63-08
[for Engine]
Sim 67-28
[for Printer]
GREY BALANCE ADJUSTMENT:
Sim 46-74
[Engine & Printer]
SERVICE MODE
Place printed test pattern onto glass for both Copy &
Printer modes.
Maintenance
14
SHARP
Document Solution Centre
Maintenance Indications:
DK
Black Drum (Counter) has reached
the specified life.
Replace Black Drum
Process
Section
(Drum)
VK
Black Developer (Counter) has reached
the specified life.
Replace Black Developer.
Process
Section
(Developer)
FK1
Fusing Roller Print Counter has reached the
specified limit.
Replace the Fusing
Upper Heat Roller Kit.
Fuser
Section
FK2
Fuser Pressure Roller Print Counter has
reached the specified limit.
Replace the Pressure
Roller Kit.
FK3
Fuser Web Cleaner (Counter) has reached
the specified limit
(Pop Up FK3 Error – Web End Detected)
Replace the
Web Cleaning Kit
MC
Main Charger Unit Counter has reached the
specified limit.
Replace Main Charger Kit
Process
Section
TK1
Transfer Unit Counter has reached the
specified limit.
Replace Transfer Unit
Transfer
Section
TA
Maintenance [All] Counter has reached specified limit
Starting Powder:
The following starting powder should be applied to the relevant consumable item during maintenance:-
Starting Powder
OPC Drum
MX-M365N
MX-M465N
MX-M565N
MX-M465N
MX-M565N
Apply CKOG-0345DS51 [Yellow Toner] on top of
UKOG-0312FCZZ [Stearic Acid]
CKOG-0345DS51 Yellow toner
Maintenance
SHARP
Document Solution Centre
15
Interval Checklist
Description
Every
300K*
Every
600K*
Process Section -MONOCHROME:
(When the Total / K maintenance counter has reached the life specified).
x
Replace Black Developer (MX-560GV).
x
Replace DV Filter Kit (MX-560DS)
Replace Black Drum (MX-560DR)
Replace Main Charger Kit (MX-560MK)
Drum Cleaning Blade.
Molt Cushion for Side Seal F/R.
Drum Separator Pawl Unit.
Main Charge Unit
Side Sheet F/R for Toner Reception Seal
Check/Replace Waste Toner Collector (MX-560HB).
Replace Ozone Filter Kit (MX-361FL).
x
Sim 24-05
Clear Developer K (Black) Counter.
Sim 24-04
Clear Drum K (Black) Counter.
Clear Main Charger K (Black) Counter.
Clear Drum Blade K (Black) Counter.
Clear Maintenance [ALL] Counter.
Clear Ozone Filter Counter.
Sim 25-02*
Toner Concentration Auto Adjustment - Select K.
Note: * When Sim 25-02 is executed, the Developer Counter
(Sim 24-05) is also cleared automatically.
Caution:
Ensure the toner cartridge is removed, prior to executing Sim 25-02.
Ensure the toner cartridge is removed, prior to executing Sim 25-02.
Image Quality Adjustments - ALL (After Replacement Described Above):
Sim 44-02
Image Density & Registration Sensor Adjustment.
Sim 44-06
Process Control execution.
Sim 46-74
Automatic Engine Calibration Adjustment (Copy & Printer).
Sim 46-02
Check/Adjust Copy Exposure Density (B/W).
Paper Feed & Transport:
Check/Clean Paper Dust Removal Unit.
Check/Clean all Paper Path Sensors (including Duplex unit).
Check/Clean/Replace PF Rollers (check tray counter using Sim 22-09).
Sim 24-04
Clear PS Paper Counter.
General:
Clean all optics, CCD, and white reference plate.
Clean all DSPF sensors.
Maintenance
16
SHARP
Document Solution Centre
MX-M365N
MX-M465N
MX-M565N
MX-M565N
Description
Every
300K
Every
300K
Fuser Section:
In addition to Total K maintenance if indicated:-
X
Replace Upper Heat Roller Kit (MX-362UH)
Upper Heat Roller.
Upper Separation Pawl & Springs.
Apply Grease UKOG-0323FCZ1 to UHR
X
Replace Upper Heat Roller Kit (MX-560UH)
Upper Heat Roller.
Upper Separation Pawl & Springs.
Apply Grease UKOG-0235FCZZ to UHR
X
Replace Lower Heat Roller Kit (MX-362LH)
Lower Heat Roller.
Lower Separation Pawl & Springs.
Apply Grease UKOG-0235FCZZ to LHR Shaft
X
Replace Lower Heat Roller Kit (MX-560LH)
Lower Heat Roller.
Lower Separation Pawl & Springs.
Apply Grease UKOG-0235FCZZ to LHR Shaft
X
Replace Web Cleaning Kit (MX-362WC)
Web Roller.
Web Pressure Roller.
Web Pressure Roller Bearing.
X
Replace Web Cleaning Kit (MX-560WC)
Web Roller.
Web Pressure Roller.
Web Pressure Roller Bearing.
Check & Clean Upper and Lower Thermistors.
Sim 24-04
Clear Fusing Web Counter.
Clear Fusing Roller Counter.
Clear Press Roller Counter.
Clear Separation Pawl Counter.
Transfer Section:
Replace Primary Transfer Kit (MX-560TU)
Transfer Roller.
Discharge Plate.
Sim 24-04
Clear TC Roller Counter.
Click on the first or last page to see other MX-M364N / MX-565N service manuals if exist.