Sharp MX-M266N / MX-M316N / MX-M356N (serv.man6) Service Manual ▷ View online
MX-M316N SIMULATION 6 – 26
26-3
Purpose
Setting
Function (Purpose)
Used to set the specifications of the auditor.
(Setting must be made according to the
auditor use conditions.)
(Setting must be made according to the
auditor use conditions.)
Section
Auditor
Operation/Procedure
Select an item to be set with the touch panel.
(*1) Displayed only when EQUITRAC.
(*2) Details of the vendor mode
Details of the vendor mode
Operation 1:
Standby during setting time of auto clear. Default is 60 seconds,
which can be changed in the system setting.
Standby during setting time of auto clear. Default is 60 seconds,
which can be changed in the system setting.
Operation 2:
Auto clear is not made.
Auto clear is not made.
Operation 3:
The display is shifted to the initial screen.
The display is shifted to the initial screen.
Item/Display
Content
Default
value
BUILT-IN
AUDITOR
AUDITOR
P10
Built-in auditor mode
(standard mode) operation.
(standard mode) operation.
P10
OUTSIDE
AUDITOR
AUDITOR
NONE
No external connection
vendor is used.
vendor is used.
NONE
P VENDOR1
Coin vendor mode
(Only the copy mode can
be controlled.)
(Only the copy mode can
be controlled.)
P VENDOR3
Vendor mode in which
signals for the intercard
connected to the PCU are
used for communication in
parallel I/F.
signals for the intercard
connected to the PCU are
used for communication in
parallel I/F.
P OTHER
Mode for an external
auditor connected to the
SCU.
auditor connected to the
SCU.
VENDOR-EX
(*1)
(*1)
Vendor I/F for EQUITRAC
VENDOR-EX
(MULTI) (*1)
(MULTI) (*1)
VENDOR-EX + Multi job
cueing Enable mode
cueing Enable mode
S_VENDOR
Serial vendor mode
DOC ADJ
ON
Support for the auditor in
document filing print
document filing print
OFF
OFF
No support for the auditor in
document filing print
document filing print
PF ADJ
ON
Continuous printing is
performed in the duplex
print mode.
If the remaining money
expires during continuous
printing, the sheets in the
machine are discharged
without being printed on the
back surfaces.
performed in the duplex
print mode.
If the remaining money
expires during continuous
printing, the sheets in the
machine are discharged
without being printed on the
back surfaces.
OFF
OFF
Continuous printing is not
performed in the duplex
print mode. (The remaining
amount is checked for
printing every surface in all
the printing process.)
If the remaining money
expires during printing, the
sheet is discharged without
printing on the back
surface.
performed in the duplex
print mode. (The remaining
amount is checked for
printing every surface in all
the printing process.)
If the remaining money
expires during printing, the
sheet is discharged without
printing on the back
surface.
VENDOR
MODE (*2)
MODE (*2)
MODE1
Vendor mode 1
MODE
3
MODE2
Vendor mode 2
MODE3
Vendor mode 3
COUNTUP
TIMING
TIMING
FUSER_IN
Mode in which the detection
timing of the paper lead
edge by the sensor after the
paper passes the fusing
section is used as the
money charging timing.
timing of the paper lead
edge by the sensor after the
paper passes the fusing
section is used as the
money charging timing.
EXIT_
OUT
FUSER_OUT
Mode in which the detection
timing of the paper rear
edge by the sensor after the
paper passes the fusing
section is used as the
money charging timing.
timing of the paper rear
edge by the sensor after the
paper passes the fusing
section is used as the
money charging timing.
EXIT_OUT
Mode in which the detection
timing of the paper rear
edge by the paper exit
sensor of the right paper
exit tray or of the after
process unit is used as the
money charging timing.
timing of the paper rear
edge by the paper exit
sensor of the right paper
exit tray or of the after
process unit is used as the
money charging timing.
PRINTER
CONTROL
CONTROL
MODE1
All the items in OUTSIDE
AUDITOR and VENDOR
MODE are allowed to
select.
AUDITOR and VENDOR
MODE are allowed to
select.
MODE
1
MODE2
(“OUTSIDE AUDITOR” is
always set to “P
VENDOR1”. Other buttons
are grayed out.
“VENDOR MODE” is
always set to “MODE3”.
Other buttons are grayed
out.)
always set to “P
VENDOR1”. Other buttons
are grayed out.
“VENDOR MODE” is
always set to “MODE3”.
Other buttons are grayed
out.)
MODE3
“OUTSIDE AUDITOR” is
always set to “P OTHER”.
Other buttons are grayed
out.
“VENDOR MODE” is
always set to “MODE3”.
Other buttons are grayed
out.
always set to “P OTHER”.
Other buttons are grayed
out.
“VENDOR MODE” is
always set to “MODE3”.
Other buttons are grayed
out.
Completion
of the
specified
quantity.
(Money
remaining)
Insufficient money during
copy job
Completion
of the
specified
quantity.
(No money
remaining)
remaining)
BW
(no money
remaining)
remaining)
BW
(money
remaining)
Condition 1
Condition 2
Condition 3
Condition 4
MODE1
Operation 1
Operation 2
Operation 2
Operation 1
MODE2
Operation 1
Operation 1
Operation 2
Operation 1
MODE3
Operation 1
Operation 3
Operation 2
Operation 3
Item/Display
Content
Default
value
MX-M316N SIMULATION 6 – 27
26-5
Purpose
Setting
Function (Purpose)
Used to set the count mode of the total
counter and the maintenance counter. (A3/
11x17 size)
counter and the maintenance counter. (A3/
11x17 size)
Section
Operation/Procedure
1)
Select an item to be set with scroll keys.
2)
Enter the setting value with 10-key
1 = Count up by 1, 2 = Count up by 2
1 = Count up by 1, 2 = Count up by 2
3)
Press [OK] key.
The set value in step 2) is saved.
26-6
Purpose
Setting
Function (Purpose)
Used to set the specifications (paper, fixed
magnification ratio, etc.) of the destination.
magnification ratio, etc.) of the destination.
Section
Operation/Procedure
1)
Select an item to be set with the touch panel.
2)
Press [EXECUTE] key.
The selected set content is saved.
26-7
Purpose
Setting
Function (Purpose)
Used to set the machine ID.
Section
Operation/Procedure
1)
Enter the machine ID with the 10-key.
Max. 30 digits of numerals and alphabetical characters can be
inputted. To select a desired character, press the 10-key
repeatedly. Refer to the following list and enter characters.
repeatedly. Refer to the following list and enter characters.
Touch the "CONFIRM" section every time a character is input-
ted.
ted.
To modify an inputted character, delete it with "CLEAR" key
and enter the correct character.
2)
Press [SET] key to set the contents entered in procedure 1).
NOTE:
The machine ID can be set also by the Web Page service
mode
mode
function.
Conventionally, the machine ID has been set by the Web Page
function. In this mode, this function is made available in the
simulation mode.
simulation mode.
26-8
Purpose
Setting
Function (Purpose)
Counter mode setting (Long scale)
Section
Operation/Procedure
1)
Select a setting item with the scroll key.
2)
Enter the set value with 10-key.
1 = 1 count up, 2 = 2 count up.
3)
Press [OK] key.
26-10
Purpose
Setting
Function (Purpose)
Used to set the trial mode of the network
scanner.
scanner.
Section
Operation/Procedure
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
Item/Display
Content
Default value
A
TOTAL (B/W)
Total counter (B/W)
1
(Japan)
2
(Except Japan)
B
MAINTE (B/W)
Maintenance counter (B/W)
2
C
DEV (B/W)
Developer counter (B/W)
U.S.A.
United States of America
CANADA
Canada
INCH
Inch series, other destinations
JAPAN
Japan
AB_B
AB series (B5 detection), other destinations
EUROPE
Europe
U.K.
United Kingdom
AUS.
Australia
AB_A
AB series (A5 detection), other destinations
CHINA
China
10-key
Number of times of key input
1
2
3
4
5
6
7
8
9
10
1
1
-
-
-
-
-
-
-
-
-
2
A
B
C
a
b
c
2
-
-
-
3
D
E
F
d
e
f
3
-
-
-
4
G
H
I
g
h
i
4
-
-
-
5
J
K
L
j
k
l
5
-
-
-
6
M
N
O
m
n
o
6
-
-
-
7
P
Q
R
S
p
q
r
s
7
-
8
T
U
V
t
u
v
8
-
-
-
9
W
X
Y
Z
w
x
y
z
9
-
0
0
-
-
-
-
-
-
-
-
-
Item/Display
Content
Setting
range
Default
value
A
TOTAL(B/W)
LONG SIZE(S)
LONG SIZE(S)
Long scale (Small) Total
counter (B/W)
counter (B/W)
1 - 10
3
B
MAINTE
(B/W) LONG
SIZE(S)
(B/W) LONG
SIZE(S)
Long scale (Small)
Maintenance counter
(B/W)
Maintenance counter
(B/W)
1 - 10
3
C
DEV(B/W) LONG
SIZE(S)
SIZE(S)
Long scale (Small)
Developer counter (B/
W)
Developer counter (B/
W)
1 - 10
3
D
TOTAL(B/W)
LONG SIZE(L)
LONG SIZE(L)
Long scale (Large)
Total counter (B/W)
Total counter (B/W)
1 - 10
5
E
MAINTE
(B/W) LONG
SIZE(L)
(B/W) LONG
SIZE(L)
Long scale (Large)
Maintenance counter
(B/W)
Maintenance counter
(B/W)
1 - 10
5
F
DEV(B/W) LONG
SIZE(L)
SIZE(L)
Long scale (Large)
Developer counter (B/
W)
Developer counter (B/
W)
1 - 10
5
TRIAL MODE
(0: YES 1: NO)
0
Trial mode setting
1
Trial mode cancel (Default)
MX-M316N SIMULATION 6 – 28
26-18
Purpose
Setting
Function (Purpose)
Used to set Disable/Enable of the toner
save mode operation.
(For the Japan and the UK versions.)
save mode operation.
(For the Japan and the UK versions.)
Section
Operation/Procedure
1)
Select an item to be set with scroll keys.
2)
Enter the set value with 10-key.
3)
Press [OK] key.
The set value in step 2) is saved.
26-30
Purpose
Setting
Function (Purpose)
Used to set the operation mode corre-
sponding to the CE mark (Europe safety
standards). (For slow start to drive the fus-
ing heater lamp)
sponding to the CE mark (Europe safety
standards). (For slow start to drive the fus-
ing heater lamp)
Section
Operation/Procedure
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
* Even in Enable state, the control may not be executed due
to the power frequency, etc.
26-32
Purpose
Setting
Function (Purpose)
Used to set the special functions.
Section
Operation/Procedure
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
26-35
Purpose
Setting
Function (Purpose)
Used to set the display mode of SIM 22-4
trouble history when a same trouble
occurred repeatedly. There are two display
modes: display as one trouble and display
as several series of troubles.
trouble history when a same trouble
occurred repeatedly. There are two display
modes: display as one trouble and display
as several series of troubles.
Section
Operation/Procedure
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
26-38
Purpose
Setting
Function (Purpose)
Used to set Continue/Stop of print when the
maintenance life is reached.
maintenance life is reached.
Section
Operation/Procedure
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
26-49
Purpose
Setting
Function (Purpose)
Used to set the print speed of postcards
mode.
mode.
Section
Operation/Procedure
Select the copy speed mode with the touch panel. (Default: LOW)
Item
Display
Content
Default
value
A
COPY
0
Copy toner save mode is inhibited.
0
1
Copy toner save mode is allowed
B
PRINTER
0
Printer toner save mode is inhibited.
0
1
Printer toner save mode is allowed.
0
Control allowed
1
Control inhibited
U.S.A
1 (CE not supported)
EUROPE
0 (CE supported)
CANADA
1 (CE not supported)
U.K.
0 (CE supported)
INCH
1 (CE not supported)
AUS.
0 (CE supported)
JAPAN
1 (CE not supported)
AB_A
0 (CE supported)
AB_B
1 (CE not supported)
CHINA
0 (CE supported)
Item/Display
Content
Setting range
Default
value
A
CLEANING
PRINT SET
PRINT SET
The screen of the
cleaning mode self print
execution is displayed.
(ON)
cleaning mode self print
execution is displayed.
(ON)
0
YES
1(NO)
The screen of the
cleaning mode self print
execution is not
displayed. (OFF)
cleaning mode self print
execution is not
displayed. (OFF)
1
NO
0
Only once display.
1
Any time display.
Item/Display
Content
Default
value
A
MAINTENANCE
LIFE OVER
(0: CONTINUE
1: STOP)
LIFE OVER
(0: CONTINUE
1: STOP)
0
Setting of Print Continue/
Stop when the maintenance
life is over (Print Continue)
Stop when the maintenance
life is over (Print Continue)
0
1
Setting of Print Continue/
Stop when the maintenance
life is over (Print Stop)
Stop when the maintenance
life is over (Print Stop)
Item
Setting
value
Content
Default
value
POSTCARD
LOW
Postcard copy speed LOW
LOW
HIGH
Postcard copy speed HIGH
MX-M316N SIMULATION 6 – 29
26-50
Purpose
Setting
Function (Purpose)
Used to set functions.
Section
Operation/Procedure
1)
Select a target item of setting with scroll key on the touch
panel.
panel.
2)
Enter the set value with 10-key.
3)
Press [OK] key. (The set value is saved.)
(*1) Default values for each destination of item A
(*2)
26-51
Purpose
Setting
Function (Purpose)
Used to set the specifications of the serial
port operation.
port operation.
Section
Operation/Procedure
26-52
Purpose
Setting
Function (Purpose)
Used to set whether non-printed paper
(insertion paper, cover paper) is counted up
or not.
(insertion paper, cover paper) is counted up
or not.
Section
Operation/Procedure
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
Item/Display
Content
Default
value
A
BW REVERSE
0
BW reverse copy Disable
Refer
to *1
1
BW reverse copy Enable
B
FINISHER
FUNCTION
FUNCTION
0
Finisher special paper
The number of paper exit is
limited.
The number of paper exit is
limited.
0
Refer
to *2
1
Finisher special paper
The number of paper exit is
not limited.
The number of paper exit is
not limited.
C
FEED TRAY
COLOR
COLOR
0
Paper feed tray color display
ON during paper feed
ON during paper feed
0
1
Paper feed tray color display
OFF during paper feed
OFF during paper feed
D
LONG SIZE PRINT
0
Long size print disable
0
1
Long size print enable
E
WIRELESS SET
0
Wireless LAN disable
0
1
Wireless LAN enable
Destination
Item A
U S A
1
CANADA
1
INCH
1
JAPAN
1
AB_B
1
EUROPE
1
U K
0
AUS
1
AB_A
1
CHINA
1
Target
paper
Target paper setting
0
1
Inner
finisher
finisher
Postcard,
envelope
envelope
The operation is stopped when
10 sheets of a same kind are
discharged continuously. When,
however, different kinds of
sheets are mixed and
discharged and 10 or less
sheets of a kind are
continuously discharged, the
operation is stopped by the
paper exit tray full detection.
10 sheets of a same kind are
discharged continuously. When,
however, different kinds of
sheets are mixed and
discharged and 10 or less
sheets of a kind are
continuously discharged, the
operation is stopped by the
paper exit tray full detection.
If it is set to "1,"
the operation is
stopped when
the paper exit
tray is full or
when 250
sheets
(35.5mm thick)
are discharged.
the operation is
stopped when
the paper exit
tray is full or
when 250
sheets
(35.5mm thick)
are discharged.
Label
sheet,
tab sheet,
OHP
sheet,
tab sheet,
OHP
The operation is stopped when
100 sheets of a same kind are
discharged continuously. When,
however, different kinds of
sheets are mixed and
discharged and 100 or less
sheets of a kind are
continuously discharged, the
operation is stopped by the
paper exit tray full detection.
100 sheets of a same kind are
discharged continuously. When,
however, different kinds of
sheets are mixed and
discharged and 100 or less
sheets of a kind are
continuously discharged, the
operation is stopped by the
paper exit tray full detection.
0
Count up
1
No count up
Destination
Default
U.S.A
0 (Counted)
CANADA
0 (Counted)
INCH
0 (Counted)
JAPAN
1 (Not counted)
AB_B
0 (Counted)
EUROPE
0 (Counted)
U.K.
0 (Counted)
AUS.
1 (Not counted)
AB_A
0 (Counted)
CHINA
0 (Counted)
Click on the first or last page to see other MX-M266N / MX-M316N / MX-M356N (serv.man6) service manuals if exist.