DOWNLOAD Sharp MX-M266N / MX-M316N / MX-M356N (serv.man6) Service Manual ↓ Size: 69.03 MB | Pages: 127 in PDF or view online for FREE

MX-M316N  SIMULATION  6 – 6

56

1

Used to transport data between HDD - MFP PWB SRAM/EEPROM. (Used to repair the PWB.)

2

Used to backup the data in the EEPROM. SD Card, and HDD (including user authentication data and 
address data) to the USB memory. (Corresponding to the device cloning and the storage backup.)

3

Used to backup the document filing data to the USB memory.

4

Used to backup the JOB log data to the USB memory.

5

Used to import the SIM22-6 data to a USB memory in the TEXT format.

6

Used to output the JAM/trouble data.

7

Used to backup the SYS log data to the USB memory.

11

Used to save the data in the SD card to the HDD temporarily.

12

Used to copy the SD card data saved temporarily in the HDD with SIM56-11 to the machine.

60

1

Used to check the memory operations (read/write) of the MFP PWB.

61

1

Used to check the LSU polygon motor rotation and laser detection.

LSU

3

Used to set the laser power 

62

1

Used to format the hard disk. (HDD: Excluding the Operation manual and the watermark data)

2

Used to check read/write of the hard disk (partial).

3

Used to check read/write of the hard disk (all areas).

6

Used to perform the self diagnostics of the hard disk.

7

Used to print the hard disk self diagnostics error log.

8

Used to format the hard disk. (HDD: Excluding the Operation Manual, the watermark data, and the system 
area)

10

Used to clear the job completion list data.

11

Used to delete the document filing data.

12

Used to set Enable/Disable of auto format in a hard disk trouble.

13

Used to format the hard disk. (Operation Manual, watermark data only)

14

Used to initialize (remake) only the database file of the HDD.

HDD

63

1

Used to display the shading correction result.

Scanner

2

Used to perform shading.

3

Used to perform scanner (CCD) color balance and gamma auto adjustment.

Scanner

4

Used to display the SIT chart patch density.

5

Used to perform the scanner (CCD) color balance and gamma default setting.

64

2

Test print. (Self print) (Monochrome mode)

4

Printer test print. (Self print)

5

Printer test print. (Self print) (PCL)

6

Printer test print. (Self print) (PS)

65

1

Used to adjust the touch panel (LCD display section) detection coordinates.

Operation panel section

2

Used to display the touch panel (LCD display section) detection coordinates.

5

Used to check the operation panel key input.

MX-M316N  SIMULATION  6 – 7

 

 

1-1

Operation test/check

Used to check the operation of the scanner
(reading) unit and the control circuit.

Scanner (reading)

1)

Select the operation speed with the touch panel key.

2)

Press [EXECUTE] key.

Scanning is once performed at the speed corresponding to the
scan resolution (operation speed).

<56opm>

<31opm>

66

1

Used to display the FAX-related soft SW (2 - 150) on the LCD to allow changing the soft SW while checking 
with the LCD.

FAX

2

Used to enter a country code and set the default value for the country code.

FAX

3

Used to check read/write of the EEPROM and the SDRAM on the MODEM controller and display the result.

FAX

4

Used to send the selected signals to the line and the main unit speaker. (Send level: max.) 

FAX

5

Used to send the selected signal to the line and the main unit speaker. (Send level: Soft SW setting) 
(For the kinds of send signals, refer to SIM66-04.)

FAX

6

Used to print the confidential registration check table (BOX NO., BOX name, passcode. 
(If there is no confidential registration, no print is made.)

FAX

7

Used to output all image data saved in the image memory. (Confidential data are also outputted.)

FAX

8

Used to send the selected sound messages to the line and the speaker. (Send level: Max.)

FAX

9

Used to send the selected sound message to the line and the speaker. (Send level: Soft SW setting) 
* For details of sound messages, refer to the sound message table of SIM66-08.

FAX

10

Used to clear the FAX and image send image data. (The confidential data are also cleared.)

FAX

11

Used to send the selected signal at 300bps to the line and the speaker. (Send level: Max.)

FAX

12

Used to send the selected signal at 300bps to the line and the speaker. (Send level: Soft SW setting) 
* For the kings of send signals at 300bps, refer to SIM66-11, 300bps send signal table.

FAX

13

Used to register dial numbers for SIM66-14/15/16, Dial test. (Up to 20 digits can be registered.)

FAX

14

Used to execute the dial pulse (10PPS) send test and to adjust the make time.

FAX

15

Used to execute the dial pulse (20PPS) send test and to adjust the make time.

FAX

16

Used to execute the DTFM signal send test and to adjust the send level.

FAX

17

Used to send the DTMF signal to the line and the speaker. (Send level: Max.)

FAX

18

Used to send the DTMF signal to the line and the speaker. (Send level: Soft SW setting)

FAX

21

Used to print the selected items (system error, protocol monitor).

FAX

22

Used to set the handset sound volume. (This simulation can be executed even though the handset setting 
is set to NO. When, however, the handset is not installed, the sound volume cannot be checked.) 
(Japan model only)

FAX

24

Used to clear the FAST save data.

FAX

29

Used to initialize the telephone book data (the one-touch registration table, the FTP/Desktop expansion 
table, the group expansion table, the program registration table, the interface memory box table, the meta 
data, InboundRouting, and the DocumentAdmin table).

FAX

30

Used to display the TEL/LIU status change, The display is highlighted by status change.

FAX

31

Used to set ON/OFF the port for output to TEL/LIU.

FAX

32

Used to check the fixed data received from the line and to display the result.

FAX

33

Used to execute detection of various signals with the line connected and to display the detection result. 
When a signal is detected, the display is highlighted.

FAX

66

34

Used to execute the send test and display the time required for sending image data in the test. Used to 
execute send test and display. (Unit: ms)

FAX

36

Used to check send and receive data from the MODEM controller to the MFP controller or the data line or 
the command line individually.

FAX

39

Used to check and change the destination setting saved in EEPROM of the FAX BOX.

FAX

42

Used to rewrite the program to power control installed in the FAX BOX.

FAX

43

Used to write the adjustment value into the power control installed in the FAX BOX.

FAX

61

Used to display the FAX-related soft SW (151 - 250) on the LCD to allow changing the soft SW while 
checking with the LCD.

FAX

62

Used to import the FAX receive data into a USB memory in PDF file type.

FAX

67

17

Printer reset

Printer

45

Used to adjust the printer image filter and trapping.

Printer

OC SCAN

300DPI

300DPI 
(372.0mm/s)

300DPI 
(372.0mm/s)

400DPI

400DPI 
(279.0mm/s)

600DPI

600DPI 
(186.0mm/s)

1200DPI

1200DPI 
(93.0mm/s)

OC SCAN

300DPI

300DPI 
(248.0mm/s)

300DPI 
(248.0mm/s)

400DPI

400DPI 
(186.0mm/s)

600DPI

600DPI 
(124.0mm/s)

1200DPI

1200DPI 
(62.0mm/s)

MX-M316N  SIMULATION  6 – 8

 

1-2

Operation test/check

Used to check the sensors in the scanner
(reading) section and the related circuits.

Scanner (reading)

The operating status of the sensor is displayed.

When "MHPS" is highlighted, the scanner unit is in the home posi-
tion.

 

1-5

Operation test/check

Used to check the operation of the scanner
(reading) unit and the control circuit.

Scanner (reading)

1)

Select the operation speed with the touch panel key.

2)

Press [EXECUTE] key.

Scanning is repeated at the speed corresponding to the scan
resolution (operation speed).

When [EXECUTE] key is pressed, the operation is terminated.

 

 

2-1

Operation test/check

Used to check the operations of the auto-
matic document feeder and the control cir-
cuit.

RSPF

1)

Select the operation mode and the speed with the touch panel
key.

2)

Press [EXECUTE] key.

The RSPF repeats paper feed, transport, and paper exit oper-
ations at the speed corresponding to the scan resolution (oper-
ation speed).

When [EXECUTE] key is pressed, the operation is terminated.

<56opm>

<31opm>

 

2-2

Operation test/check

Used to check the operations of the sen-
sors and the detectors in the automatic
document feeder section and the control
circuits.

RSPF

The operating conditions of the sensors and detectors are dis-
played.

The code names of the sensors and the detectors which are active
are highlighted.

CAUTION: SWD_LEN and SWD_AD are not ON/OFF display.

OC SCAN

300DPI

300DPI 
(248.0mm/s)

300DPI 
(2480.mm/s)

400DPI

400DPI 
(186.0mm/s)

600DPI

600DPI 
(124.0mm/s)

1200DPI

1200DPI 
(62.0mm/s)

 (SINGLE)

300DPI

300DPI 
(279.0mm/s)

300DPI 
(279.0mm/s)

400DPI

400DPI 
(279.0mm/s)

600DPI

600DPI 
(186.0 mm/s)

(DOUBLE)

300DPI

300DPI 
(279.0mm/s)

300DPI 
(279.0mm/s)

400DPI

400DPI 
(279.0mm/s)

600DPI

600DPI 
(124.0 mm/s)

 (SINGLE)

300DPI

300DPI 
(186.0mm/s)

300DPI 
(186.0mm/s)

400DPI

400DPI 
(186.0mm/s)

600DPI

600DPI 
(124.0 mm/s)

(DOUBLE)

300DPI

300DPI 
(186.0mm/s)

300DPI 
(186.0mm/s)

400DPI

400DPI 
(186.0mm/s)

600DPI

600DPI 
(124.0 mm/s)

SSET

SPF installation detection

SOCD

RSPF open/close sensor

SCOV

RSPF cover open/close detector

SPED

SPF document empty sensor

SPPD1

SPF primary paper transport sensor

SPPD2

SPF secondary paper transport sensor

SPPD3

SPF scan front sensor

SPPD4

SPF scan rear sensor

SPLS1

SPF document length sensor 1

SPLS2

SPF document length sensor 2

STMPU

SPF stamp UN installation detection

SWD_LEN

SPF document guide plate position (Unit: 0.1mm)

SWD_AD

SPF document detection volume output AD value

MX-M316N  SIMULATION  6 – 9

 

2-3

Operation test/check

Used to check the operations of the loads
in the automatic document feeder and the
control circuit.

RSPF

1)

Select a target item of the operation check with the touch panel
key.

2)

Press [EXECUTE] key.

The selected load performs the operation.

When [EXECUTE] key is pressed, the operation is terminated.

<56opm>

<31opm>

 

 

3-2

Operation test/check

Used to check the operations of the sen-
sors and the detectors in the finisher and
the control circuit.

Finisher

The operating conditions of the sensors and detectors are dis-
played.

The code names of the sensors and the detectors which are active
are highlighted.

 

3-3

Operation test/check

Used to check the operation of the load in
the finisher and the control circuit.

Finisher

1)

Select the item to be operation checked with the touch panel
key.

2)

Press [EXECUTE] key.

The selected load performs the operation.

When [EXECUTE] key is pressed, the operation is terminated.

SPUM_F

RSPF paper feed motor (normal rotation)

SPUM_R

RSPF paper feed motor (reverse rotation)

SPFM_F

RSPF transport motor (normal rotation)

SPFM_R

RSPF transport motor (reverse rotation)

SRRC 

Registration roller clutch (RSPF)

SPRS

Pressure release solenoid (RSPF)

STMPS

Stamp solenoid

SPUM_F

RSPF paper feed motor (normal rotation)

SPUM_R

RSPF paper feed motor (reverse rotation)

SPUC

Paper feed clutch (RSPF)

SRRC 

Registration roller clutch (RSPF)

SPRS

Pressure release solenoid (RSPF)

STMPS

Stamp solenoid

FAPHPS_F

Paper alignment plate HP sensor F

FAPHPS_R

Paper alignment plate HP sensor R

FDRPS

Paper exit roller position sensor

FDTLLS

Paper exit tray lower limit sensor

FDTPD

Delivery tray paper detector

FPHPS

Punch unit home position sensor

FPLD

Paper height detector

FPLS

Paper surface sensor auxiliary detector

FPMRS

Punch motor rotation sensor

FPPD1

Paper entry detector

FPRD

Compiler paper rear edge detector C

FSED

Staple empty detector

FSHPS

Staple HP sensor

FSLD

Staple lead edge detector

FSSW

Safety switch

FSTPD

Staple tray paper detector

FTPS

Tray position sensor 

FCF

Cooling fan

FDRLM

Paper exit roller lift motor

FPAM_F

Paper alignment motor F

FPAM_R

Paper alignment motor R

FPDM

Paper exit motor

FPGS

Paper gate solenoid

FPS

Paddle solenoid

FARLS

Finisher alignment roller lift solenoid

FPTM

Paper transport motor

FSL

Illumination of the staple unit

FSM

Staple motor

FTLM

Tray lift motor