Sharp MX-M200D / MX-M200DK (serv.man7) User Manual / Operation Manual ▷ View online
87
SYSTEM SETTINGS GUIDE
7
Select "DEFAULT TRAY SET" and press the [OK] key.
The following screen will appear.
The following screen will appear.
1
Select the tray with the [
] or [
] key.
2
Press the [OK] key.
DEFAULT EXPOSURE
This program is used to select the exposure
mode/level that is initially selected when the
[EXPOSURE] key is pressed.
The factory default setting is "AUTO".
mode/level that is initially selected when the
[EXPOSURE] key is pressed.
The factory default setting is "AUTO".
Select "DEFAULT EXPOSURE" and press the [OK]
key. The following screen will appear.
key. The following screen will appear.
1
Select the exposure mode with the [
] or
[
] key.
2
If you selected "TEXT" or "PHOTO", set
the exposure level with the [
the exposure level with the [
] or [
] key.
3
Press the [OK] key.
STREAM FEEDING
When stream feeding mode is enabled, additional
originals which are placed in the SPF within 5 seconds
after the previous original was fed will be copied
automatically. (If more than 5 seconds elapse, the
[START] key (
originals which are placed in the SPF within 5 seconds
after the previous original was fed will be copied
automatically. (If more than 5 seconds elapse, the
[START] key (
) must be pressed again.)
This function can be used when scanning originals in
copy and scan modes.
The function is initially disabled (factory default
setting).
copy and scan modes.
The function is initially disabled (factory default
setting).
To enable stream feeding, select "STREAM
FEEDING" and press the [OK] key so that a
checkmark appears in the checkbox.
FEEDING" and press the [OK] key so that a
checkmark appears in the checkbox.
To disable stream feeding, select "STREAM
FEEDING" once again and press the [OK] key so
that the checkmark is cleared from the checkbox.
FEEDING" once again and press the [OK] key so
that the checkmark is cleared from the checkbox.
ROTATION COPY
(When the dual function board is installed)
If the orientation of the original does not match that of
the paper, the image can be rotated.
Rotation copy operates when automatic paper
selection or automatic ratio selection operates.
The function is initially enabled (factory default
setting).
the paper, the image can be rotated.
Rotation copy operates when automatic paper
selection or automatic ratio selection operates.
The function is initially enabled (factory default
setting).
To enable rotation copy, select "ROTATION COPY"
and press the [OK] key so that a checkmark
appears in the checkbox.
and press the [OK] key so that a checkmark
appears in the checkbox.
To disable rotation copy, select "ROTATION
COPY" once again and press the [OK] key so that
the checkmark is cleared from the checkbox.
COPY" once again and press the [OK] key so that
the checkmark is cleared from the checkbox.
SORT AUTO SELECT
(When the dual function board is installed)
This program is used to select the default output mode
when the SPF is used for copying.
The initial factory setting is "SORT".
when the SPF is used for copying.
The initial factory setting is "SORT".
Select "SORT AUTO SELECT" and press the [OK]
key. The following screen will appear.
key. The following screen will appear.
1
Select the output mode with the [
] or [
]
key.
2
Press the [OK] key.
DEFAULT TRAY SET
TRAY 1
TRAY 2
TRAY 3
TRAY 4
TRAY 1
TRAY 2
TRAY 3
TRAY 4
DEFAULT EXPOSURE
AUTO
TEXT
PHOTO
AUTO
TEXT
PHOTO
AUTO
If the image is both rotated and reduced, the
position of the copied image will vary
depending on the orientations of the original
and the paper.
position of the copied image will vary
depending on the orientations of the original
and the paper.
Note
Original
Paper
Copy
SORT AUTO SELECT
NO SORT
SORT
NO SORT
SORT
Pegasus-E_Copy_Ex.book 87 ページ ２００９年７月２２日 水曜日 午後２時４分
88
SYSTEM SETTINGS GUIDE
RESOLUTION IN AUTO/TEXT MODE
This program is used to set the resolution used when
the exposure mode is set to "AUTO" or "TEXT". When
"300dpi" is selected, the first copy time is shorter than
when "600dpi" is selected.
The factory default setting is "300dpi".
the exposure mode is set to "AUTO" or "TEXT". When
"300dpi" is selected, the first copy time is shorter than
when "600dpi" is selected.
The factory default setting is "300dpi".
Select "RESOLUTION IN AUTO/TEXT MODE" and
press the [OK] key. The following screen will appear.
press the [OK] key. The following screen will appear.
1
Press the [
] or [
] key to select the
resolution.
2
Press the [OK] key.
PHOTO MODE DEFAULT
This program is used to select the method of
expressing halftones when "PHOTO" is selected with
the [EXPOSURE] key for a copy job. Select
"PATTERN 1" or "PATTERN 2" for the method of
expressing halftones.
"PATTERN 1" is recommended for printed photos,
providing sharp images and good expression of
outlines.
"PATTERN 2" is recommended for photos on
photographic paper, providing a soft image.
The factory default setting is "PATTERN 2".
expressing halftones when "PHOTO" is selected with
the [EXPOSURE] key for a copy job. Select
"PATTERN 1" or "PATTERN 2" for the method of
expressing halftones.
"PATTERN 1" is recommended for printed photos,
providing sharp images and good expression of
outlines.
"PATTERN 2" is recommended for photos on
photographic paper, providing a soft image.
The factory default setting is "PATTERN 2".
Select "PHOTO MODE DEFAULT" and press the [OK]
key. The following screen will appear.
key. The following screen will appear.
1
Select "PATTERN 1" or "PATTERN 2" with
the [
the [
] or [
] key.
2
Press the [OK] key.
LIMIT OF COPIES
This program is used to set the limit for the number of
copies that can be set (and that can appear in the
display) for one copy job.
The factory default setting is "999 copies".
copies that can be set (and that can appear in the
display) for one copy job.
The factory default setting is "999 copies".
Select "LIMIT OF COPIES" and press the [OK] key.
The following screen will appear.
The following screen will appear.
1
Select "99 copies" or "999 copies" with the
[
[
] or [
] key.
2
Press the [OK] key.
DISABLE AUTO PAPER SELECTION
This program is used to disable automatic paper
selection. When automatic paper selection is disabled,
the most suitable paper is not selected automatically
when an original is placed on the document glass or in
the document feeder tray.
This function is initially disabled (factory default
setting).
selection. When automatic paper selection is disabled,
the most suitable paper is not selected automatically
when an original is placed on the document glass or in
the document feeder tray.
This function is initially disabled (factory default
setting).
To disable auto paper selection, select "DISABLE
AUTO PAPER SELECTION" and press the [OK] key
so that a checkmark appears in the checkbox.
AUTO PAPER SELECTION" and press the [OK] key
so that a checkmark appears in the checkbox.
To re-enable auto paper selection, select
"DISABLE AUTO PAPER SELECTION" once again
and press the [OK] key so that the checkmark is
cleared from the checkbox.
"DISABLE AUTO PAPER SELECTION" once again
and press the [OK] key so that the checkmark is
cleared from the checkbox.
DISABLE 2-SIDED COPY
(Only on models that support two-sided
printing)
printing)
Use this program when you wish to disable two-sided
copying or when the two-sided function has failed.
When this program is enabled, only one-sided printing
is possible.
The function is initially disabled (factory default
setting).
copying or when the two-sided function has failed.
When this program is enabled, only one-sided printing
is possible.
The function is initially disabled (factory default
setting).
To disable two-sided copying, select "DISABLE
2-SIDED COPY" and press the [OK] key so that a
checkmark appears in the checkbox.
2-SIDED COPY" and press the [OK] key so that a
checkmark appears in the checkbox.
To re-enable two-sided copying, select "DISABLE
2-SIDED COPY" once again and press the [OK] key
so that the checkmark is cleared from the
checkbox.
2-SIDED COPY" once again and press the [OK] key
so that the checkmark is cleared from the
checkbox.
RESOLUTION
300dpi
600dpi
PHOTO MODE DEFAULT
PATTERN 1
PATTERN 1
PATTERN 2
LIMIT OF COPIES
99 copies
99 copies
999 copies
Pegasus-E_Copy_Ex.book 88 ページ ２００９年７月２２日 水曜日 午後２時４分
89
INDEX
Symbols / Numbers
[
] key .....................................................................15
2 in 1 / 4 in 1 copy .....................................................66
250-sheet paper feed unit / 2 x 250-sheet paper feed unit .....41
[2-SIDED COPY] key ................................................15
2-sided printing..........................................................18
250-sheet paper feed unit / 2 x 250-sheet paper feed unit .....41
[2-SIDED COPY] key ................................................15
2-sided printing..........................................................18
A
[ACC.#-C] key .....................................................15, 23
Administrator password.............................................75
Arrow keys ................................................................15
Auditing mode ...........................................................23
Auto clear ......................................................17, 46, 83
[AUTO IMAGE] key ...................................................15
Auto paper select mode ............................................47
Auto power shut-off ...................................................85
Auto power shut-off mode .........................................17
Auto power shut-off timer ..........................................85
Auto tray switching ..............................................22, 49
Administrator password.............................................75
Arrow keys ................................................................15
Auditing mode ...........................................................23
Auto clear ......................................................17, 46, 83
[AUTO IMAGE] key ...................................................15
Auto paper select mode ............................................47
Auto power shut-off ...................................................85
Auto power shut-off mode .........................................17
Auto power shut-off timer ..........................................85
Auto tray switching ..............................................22, 49
B
[BACK] key................................................................14
Base screen ..............................................................18
Beep..........................................................................84
Bypass tray .............................................13, 18, 20, 61
Bypass tray extension .........................................13, 20
Bypass tray guides..............................................13, 20
Bypass tray paper feed roller ....................................37
Base screen ..............................................................18
Beep..........................................................................84
Bypass tray .............................................13, 18, 20, 61
Bypass tray extension .........................................13, 20
Bypass tray guides..............................................13, 20
Bypass tray paper feed roller ....................................37
C
[C] key .................................................................14, 46
[CA] key...............................................................15, 18
Card shot...................................................................71
Centre tray ................................................................12
Charger cleaner ..................................................12, 38
Checking the total output count.................................36
Cleaning the machine
[CA] key...............................................................15, 18
Card shot...................................................................71
Centre tray ................................................................12
Charger cleaner ..................................................12, 38
Checking the total output count.................................36
Cleaning the machine
- Bypass tray paper feed roller ..............................37
- Document glass and SPF/document cover.........37
- Transfer charger .................................................38
- Document glass and SPF/document cover.........37
- Transfer charger .................................................38
Cleaning the transfer charger....................................38
Copy functions ..........................................................45
[COPY] key / indicator...............................................14
Copy number display ................................................14
[COPY RATIO] key ...................................................15
Copy functions ..........................................................45
[COPY] key / indicator...............................................14
Copy number display ................................................14
[COPY RATIO] key ...................................................15
D
DATA indicator ................................................... 14, 15
Default settings ........................................................ 18
Developer replacement required icon ...................... 28
Disable auto paper selection .................................... 88
Display ......................................................... 14, 16, 39
Document cover ....................................................... 13
Default settings ........................................................ 18
Developer replacement required icon ...................... 28
Disable auto paper selection .................................... 88
Display ......................................................... 14, 16, 39
Document cover ....................................................... 13
- Cleaning ............................................................. 37
- Removing ........................................................... 47
- Removing ........................................................... 47
Document feeder tray............................................... 13
Document glass ................................................. 12, 45
Document glass ................................................. 12, 45
- Cleaning ............................................................. 37
- Normal copying .................................................. 45
- Two-sided copies of one-sided originals ............ 58
- Normal copying .................................................. 45
- Two-sided copies of one-sided originals ............ 58
Dual page copy ........................................................ 62
E
Envelopes ................................................................ 20
Erase copy ............................................................... 69
Exit area ................................................................... 13
Exposure
Erase copy ............................................................... 69
Exit area ................................................................... 13
Exposure
- Making a copy darker or lighter.......................... 48
[EXPOSURE] key............................................... 15, 48
F
[FAX] key / indicator ................................................. 15
[FAX STATUS] key .................................................. 14
Features ................................................................... 10
Feeding roller cover ........................................... 13, 29
Front cover ............................................................... 12
Fusing unit paper guide...................................... 13, 33
Fusing unit release levers .................................. 13, 32
[FAX STATUS] key .................................................. 14
Features ................................................................... 10
Feeding roller cover ........................................... 13, 29
Front cover ............................................................... 12
Fusing unit paper guide...................................... 13, 33
Fusing unit release levers .................................. 13, 32
G
Glass cleaner ..................................................... 12, 37
H
Handles .................................................................... 12
I
Indicators and display messages ............................. 28
Installation requirements ............................................ 8
INTERRUPT indicator ........................................ 14, 63
[INTERRUPT] key .................................................... 14
Installation requirements ............................................ 8
INTERRUPT indicator ........................................ 14, 63
[INTERRUPT] key .................................................... 14
J
Job separator tray kit................................................ 12
Pegasus-E_Copy_Ex.book 89 ページ ２００９年７月２２日 水曜日 午後２時４分
90
L
LINE indicator............................................................15
Loading paper ...........................................................18
Loading paper in the bypass tray ..............................20
Loading paper ...........................................................18
Loading paper in the bypass tray ..............................20
M
Main features ............................................................10
Maintenance icon ......................................................28
Manuals provided with the product .............................9
Margin shift................................................................68
Message....................................................................28
Misfeed removal........................................................29
Maintenance icon ......................................................28
Manuals provided with the product .............................9
Margin shift................................................................68
Message....................................................................28
Misfeed removal........................................................29
- Bypass tray .........................................................30
- In the machine ....................................................31
- SPF .....................................................................29
- Tray 1 ..................................................................33
- Tray 2 ..................................................................34
- In the machine ....................................................31
- SPF .....................................................................29
- Tray 1 ..................................................................33
- Tray 2 ..................................................................34
N
Normal copying
- Copying from the document glass ......................45
- Copying from the SPF.........................................46
- Copying from the SPF.........................................46
Numeric keys ............................................................14
O
Offset function .....................................................63, 65
[OK] key ....................................................................14
ONLINE indicator ......................................................14
Operation in copy, print, scan, and fax modes..........16
Operation panel...................................................12, 14
Original guides ....................................................13, 46
Original misfeed ........................................................29
[OUTPUT] key...........................................................15
[OK] key ....................................................................14
ONLINE indicator ......................................................14
Operation in copy, print, scan, and fax modes..........16
Operation panel...................................................12, 14
Original guides ....................................................13, 46
Original misfeed ........................................................29
[OUTPUT] key...........................................................15
P
Paper.........................................................................18
[PAPER SELECT] key ..............................................15
Parallel port ...............................................................12
Part names and functions .........................................12
Photoconductive drum ..............................................13
Power off ...................................................................17
Power on ...................................................................17
Power save modes....................................................17
Power switch .......................................................12, 17
Preheat mode............................................................17
Press the [INTERRUPT] key.....................................63
[PRINT] key / indicator ..............................................14
Problem.....................................................................25
Product configurations ................................................3
[PAPER SELECT] key ..............................................15
Parallel port ...............................................................12
Part names and functions .........................................12
Photoconductive drum ..............................................13
Power off ...................................................................17
Power on ...................................................................17
Power save modes....................................................17
Power switch .......................................................12, 17
Preheat mode............................................................17
Press the [INTERRUPT] key.....................................63
[PRINT] key / indicator ..............................................14
Problem.....................................................................25
Product configurations ................................................3
R
[READ-END] key ...................................................... 15
Reducing or enlarging a copy
Reducing or enlarging a copy
- Automatic ratio selection .................................... 52
- Preset copy ratios/zoom..................................... 52
- XY zoom copying ............................................... 54
- Preset copy ratios/zoom..................................... 52
- XY zoom copying ............................................... 54
Removing the document cover ................................ 47
Replacing the toner cartridge ................................... 35
Reversing tray .................................................... 13, 29
Right side cover ................................................. 13, 29
Roller rotating knob ...................................... 13, 31, 32
Rotation copy ........................................................... 64
RSPF
Replacing the toner cartridge ................................... 35
Reversing tray .................................................... 13, 29
Right side cover ................................................. 13, 29
Roller rotating knob ...................................... 13, 31, 32
Rotation copy ........................................................... 64
RSPF
- One-sided copies of two-sided originals ............ 60
- Two-sided copies of two-sided originals ............ 59
- Two-sided copies of two-sided originals ............ 59
S
[SCAN] key / indicator .............................................. 14
Selecting the tray ..................................................... 49
Setting the number of copies ................................... 49
Side cover ................................................................ 13
Side cover handle .................................................... 13
[SPECIAL FUNCTION] key ...................................... 15
Specifications ........................................................... 73
SPF .......................................................................... 46
Selecting the tray ..................................................... 49
Setting the number of copies ................................... 49
Side cover ................................................................ 13
Side cover handle .................................................... 13
[SPECIAL FUNCTION] key ...................................... 15
Specifications ........................................................... 73
SPF .......................................................................... 46
- Acceptable originals ........................................... 47
- Cleaning ............................................................. 37
- Original misfeed ................................................. 29
- Two-sided copying of one-sided originals .......... 57
- Cleaning ............................................................. 37
- Original misfeed ................................................. 29
- Two-sided copying of one-sided originals .......... 57
Standard sizes ......................................................... 50
[START] indicator ..................................................... 15
[START] key ....................................................... 15, 46
Storage of supplies .................................................. 42
Stream feeding ......................................................... 87
Stream feeding mode ............................................... 46
System settings ........................................................ 75
System settings list .................................................. 77
[START] indicator ..................................................... 15
[START] key ....................................................... 15, 46
Storage of supplies .................................................. 42
Stream feeding ......................................................... 87
Stream feeding mode ............................................... 46
System settings ........................................................ 75
System settings list .................................................. 77
T
Toner cartridge ................................................... 13, 35
Toner cartridge lock release lever ...................... 13, 35
Toner cartridge replacement required icon .............. 28
Top tray .................................................................... 12
Tray 1 ....................................................................... 12
Tray 2 ....................................................................... 12
Troubleshooting
Toner cartridge lock release lever ...................... 13, 35
Toner cartridge replacement required icon .............. 28
Top tray .................................................................... 12
Tray 1 ....................................................................... 12
Tray 2 ....................................................................... 12
Troubleshooting
- Machine/copying problems ................................ 25
Troubleshooting and maintenance ........................... 24
Two-sided copies using the bypass tray .................. 61
Two-sided copying ................................................... 56
Two-sided copies using the bypass tray .................. 61
Two-sided copying ................................................... 56
U
USB 2.0 (Hi-Speed mode) ....................................... 83
USB 2.0 port............................................................. 12
USB 2.0 port............................................................. 12
Z
Zoom ........................................................................ 52
Pegasus-E_Copy_Ex.book 90 ページ ２００９年７月２２日 水曜日 午後２時４分
Click on the first or last page to see other MX-M200D / MX-M200DK (serv.man7) service manuals if exist.