Sharp MX-M200D / MX-M200DK (serv.man7) User Manual / Operation Manual ▷ View online
63
4
INTERRUPTING A COPY RUN
(Interrupt copying)
A copy run can be temporarily interrupted to allow another copy job to be performed. (Interrupt copying)
When the other job is finished, the copy run will resume using the original copy settings.
When the other job is finished, the copy run will resume using the original copy settings.
• Interrupt copying is not possible when the document glass is being used for a copy job and "NO SORT" is
selected.
• When 2 in 1 or 4 in 1 is selected, interrupt copying is not possible.
• Sort copying, 2 in 1, and 4 in 1 and automatic two-sided copying cannot be used for an interrupt copy job.
• Sort copying, 2 in 1, and 4 in 1 and automatic two-sided copying cannot be used for an interrupt copy job.
Configuring settings in the system settings, use as a scanner, and fax transmission are also not possible.
1
Press the [INTERRUPT] key (
).
If the [INTERRUPT] key (
) is
pressed, copying will stop and
the settings will temporarily
return to the default settings
after the copy in progress has
been completed.
the settings will temporarily
return to the default settings
after the copy in progress has
been completed.
The INTERRUPT indicator will blink until the current
copy run stops.
copy run stops.
2
When the copy run stops, remove the
previous original(s) and place the
original(s) of the interrupt copy job.
previous original(s) and place the
original(s) of the interrupt copy job.
3
Select copy settings as needed.
4
Set the number of copies and then
press the [START] key (
press the [START] key (
).
5
When the copy job is finished, press
the [INTERRUPT] key (
the [INTERRUPT] key (
) to end
interrupt mode and remove the
original(s).
original(s).
The INTERRUPT indicator will turn off, indicating
that the interrupt function is no longer operating.
The copy settings will automatically revert to the
settings selected for the copy run before the run
was interrupted.
that the interrupt function is no longer operating.
The copy settings will automatically revert to the
settings selected for the copy run before the run
was interrupted.
6
Replace the previous original(s) and
press the [START] key (
press the [START] key (
).
The interrupted copy run will resume.
If you press the [INTERRUPT] key (
)
when auditing mode is enabled, "Enter your
account number." will appear in the display.
Enter your account number using the
numeric keys. The pages copied during
interrupt copying will be added to the count
of the entered account number. (Page 79)
account number." will appear in the display.
Enter your account number using the
numeric keys. The pages copied during
interrupt copying will be added to the count
of the entered account number. (Page 79)
INTERRUPT
Note
The interrupt copies will be offset from the
previous copies. (Offset function)
The offset function can be disabled in the
system settings. (Page 82)
(A): Copies made before the interrupt
previous copies. (Offset function)
The offset function can be disabled in the
system settings. (Page 82)
(A): Copies made before the interrupt
copy job
(B): Interrupt copies
(C): Copies made after the interrupt
(C): Copies made after the interrupt
copy job
* This function is not available in some
countries and regions.
MNO
WXYZ
@.-_
AD-END
Note
(B)
(C)
(A)
Pegasus-E_Copy_Ex.book 63 ページ 2009年7月22日 水曜日 午後2時4分
64
5
CONVENIENT COPY
FUNCTIONS
FUNCTIONS
Select convenient copy functions after pressing the [COPY] key to select copy mode.
ROTATING THE IMAGE 90 DEGREES
(Rotation copy)
When "Auto paper select mode" or "automatic ratio selection" are in operation and the original is placed in a different
orientation (vertical or horizontal) from the paper, the original image will be automatically rotated 90 degrees to
enable correct copying onto the paper.
This function is convenient for copying B4 or A3 (8-1/2" x 14" or 11" x 17") originals, which can only be placed
horizontally, onto paper that is loaded vertically.
The rotation copy function is initially enabled. It can be disabled in the system settings. (Page 87)
orientation (vertical or horizontal) from the paper, the original image will be automatically rotated 90 degrees to
enable correct copying onto the paper.
This function is convenient for copying B4 or A3 (8-1/2" x 14" or 11" x 17") originals, which can only be placed
horizontally, onto paper that is loaded vertically.
The rotation copy function is initially enabled. It can be disabled in the system settings. (Page 87)
SORT MODE
Copies of multiple original pages can collated into sets.
• The rotation copy function cannot be used in combination with the margin shift function.
• Rotation copy will not operate when a copy is enlarged to a paper size greater than A4 (8-1/2" x 11"). In this
• Rotation copy will not operate when a copy is enlarged to a paper size greater than A4 (8-1/2" x 11"). In this
case, place the original in the same orientation as the paper.
• Even if rotation copy is disabled in the system settings, rotation copy will function when the 2 in 1 or 4 in 1
function is selected (page 66).
The dual function board can scan approximately 100 standard originals (A4 (8-1/2" x 11")), however, the number
will vary for photos and other types of originals.
will vary for photos and other types of originals.
Note
Orientation of
the original
Orientation of
the original
Copy
Note
2
1
3
2
1
3
1
2
3
2
1
3
3
3
3
2
2
2
1
2
3
1
1
1
Sort
No sort
Pegasus-E_Copy_Ex.book 64 ページ 2009年7月22日 水曜日 午後2時4分
65
CONVENIENT COPY FUNCTIONS
5
1
Place the originals in the document
feeder tray or the first original on the
document glass.
feeder tray or the first original on the
document glass.
If the originals are placed in the
document feeder tray, sort
mode will be automatically
selected. This can be changed
to no sort in the system settings.
(Page 87)
document feeder tray, sort
mode will be automatically
selected. This can be changed
to no sort in the system settings.
(Page 87)
If the first original is placed on the document glass, no
sort mode will be automatically selected.
sort mode will be automatically selected.
2
Press the [OUTPUT] key.
The output mode
selection screen will
appear.
selection screen will
appear.
3
Select "NO SORT" or "SORT" with the
[
[
] or [
] key, or with the [OUTPUT]
key.
4
Press the [OK] key.
You will return to the base
screen.
screen.
5
Select other copy settings as needed
and press the [START] key (
and press the [START] key (
).
If you placed the originals in the
document feeder tray in step 1,
copying will start. If you
selected "SORT" in step 3 and
placed the first original on the
document glass, follow steps 6
and 7. Note that if you selected
"NO SORT" in step 3, copying
will begin.
document feeder tray in step 1,
copying will start. If you
selected "SORT" in step 3 and
placed the first original on the
document glass, follow steps 6
and 7. Note that if you selected
"NO SORT" in step 3, copying
will begin.
6
When the START indicator lights,
replace the original with the next
original and press the [START] key
(
replace the original with the next
original and press the [START] key
(
).
Repeat step 6 until all originals
have been scanned.
have been scanned.
7
When all originals have been
scanned, press the [READ-END] key
(
scanned, press the [READ-END] key
(
).
• Copying will start.
• If the memory becomes full while the originals are
• If the memory becomes full while the originals are
being scanned, "Memory is full." will appear in the
display. To start copying the originals that have been
scanned to that point, press the [START] key (
display. To start copying the originals that have been
scanned to that point, press the [START] key (
).
To cancel the copy job, press the [CA] key.
• The optional memory board (AR-SM5) can be installed to
increase the number of originals that can be scanned. The
memory can be expanded up to a maximum of 272 MB
(the amount expanded is 256 MB).
memory can be expanded up to a maximum of 272 MB
(the amount expanded is 256 MB).
Offset function
This function offsets each set of copies from the
previous set in centre tray, making it easy to separate
sets of copies. The offset function can be disabled in
the system settings. (Page 82)
previous set in centre tray, making it easy to separate
sets of copies. The offset function can be disabled in
the system settings. (Page 82)
* This function is not available in some countries and
regions.
O
DUPLEX SCAN
DUPLEX SCAN
DUPLEX SCAN
2-SIDED COPY
AUTO IMAGE
FORMAT
BROADCAST
OUTPUT
ORIGINAL SIZE
ORIGINAL SIZE
ORIGINAL SIZE
SORT
NO SORT
SORT
PQ
ACC
LEX SCAN
LEX SCAN
LEX SCAN
ED COPY
GHI
PQRS
BACK
OK
AN
PY
MNO
WXYZ
@.-_
AD-END
@.-_
READ-END
#-C
Offset function enabled
Offset function disabled
Pegasus-E_Copy_Ex.book 65 ページ 2009年7月22日 水曜日 午後2時4分
66
COPYING MULTIPLE ORIGINALS ONTO A
SINGLE SHEET OF PAPER
SINGLE SHEET OF PAPER
(2 in 1 / 4 in 1 copy)
Multiple originals can be copied onto a single sheet of paper in a selected layout.
This function is convenient when you wish to present multiple pages in a compact format, or show a view of all
pages in a document.
One of two layouts can be selected for 2 in 1 copy, and one of four layouts can be selected for 4 in 1 copy.
Border line selections are solid line, broken line, or none.
This function is convenient when you wish to present multiple pages in a compact format, or show a view of all
pages in a document.
One of two layouts can be selected for 2 in 1 copy, and one of four layouts can be selected for 4 in 1 copy.
Border line selections are solid line, broken line, or none.
2 in 1 copy layouts
4 in 1 copy layouts
• 2 in 1 / 4 in 1 copy cannot be used in combination with the following functions. The function selected first will take
precedence. However, 2 in 1 / 4 in 1 copy will take precedence over XY zoom.
Dual page copy, XY zoom, edge erase, margin shift, card shot
Dual page copy, XY zoom, edge erase, margin shift, card shot
• A special paper size cannot be used for 2 in 1 / 4 in 1 copy.
• 2 in 1 / 4 in 1 copy cannot be selected for an interrupt copy job. Interrupt copying is not possible during a 2 in 1 / 4
• 2 in 1 / 4 in 1 copy cannot be selected for an interrupt copy job. Interrupt copying is not possible during a 2 in 1 / 4
in 1 copy job.
• An appropriate ratio setting will be automatically selected based on the original size, the paper size, and the
selected number of images. When using the document glass, reduction is possible to 25%. When using the SPF,
reduction is possible to 50%. Certain combinations of original size, paper size, and number of images may result in
images being cut off.
reduction is possible to 50%. Certain combinations of original size, paper size, and number of images may result in
images being cut off.
• Even if "Rotation copy" is disabled in the system settings, the images may be rotated if needed depending on the
orientation of the originals and the orientation of the paper.
1
Place the originals in the document
feeder tray or the first original on the
document glass.
feeder tray or the first original on the
document glass.
2
Press the [PAPER SELECT] key to
select the desired paper tray.
select the desired paper tray.
The bypass tray cannot be
selected.
selected.
3
Press the [SPECIAL FUNCTION] key.
The special function
screen will appear.
screen will appear.
4
Press the [OK] key.
The special modes
screen will appear.
screen will appear.
2 in 1 copy
Pattern 1
Pattern 2
4 in 1 copy
Pattern 1
Pattern 2
Pattern 3
Pattern 4
COPY RATIO
ADDRESS
ADDRESS
ADDRESS
EXPOSURE
COLOUR MODE
PROGRAM
COLOUR MODE
PROGRAM
PAPER SELECT
RESOLUTION
RESOLUTION
RESOLUTION
RESOLUTION
AUTO
FO
BRO
EXPOSURE
COLOUR MODE
COLOUR MODE
PAPER SE
RESOLUT
RESOLUT
COPY
SCAN
SCAN
SPECIAL
FUNCTION
LINE
DATA
DATA
ON LINE
SPECIAL FUNCTION
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
DISPLAY CONTRAST
PAPER SIZE SET
DISPLAY CONTRAST
GHI
PQRS
BACK
OK
AN
PY
SPECIAL MODES
MARGIN SHIFT
ERASE
DUAL PAGE COPY
[OK]:ADJUST
DUAL PAGE COPY
[OK]:ADJUST
Pegasus-E_Copy_Ex.book 66 ページ 2009年7月22日 水曜日 午後2時4分
Click on the first or last page to see other MX-M200D / MX-M200DK (serv.man7) service manuals if exist.