Sharp MX-M200D / MX-M200DK (serv.man7) User Manual / Operation Manual ▷ View online
47
COPY FUNCTIONS
4
Auto paper select mode
When auto paper select mode is enabled, "AUTO" appears in the paper size display. This function automatically
selects paper that is the same size as the original (A5, B5, B5R, A4, A4R, B4, A3, 5-1/2" x 8-1/2", 8-1/2" x 11",
8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14", 11" x 17" paper).
selects paper that is the same size as the original (A5, B5, B5R, A4, A4R, B4, A3, 5-1/2" x 8-1/2", 8-1/2" x 11",
8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14", 11" x 17" paper).
• If a zoom setting is selected after placing the original, the paper size that is appropriate for the zoom setting will
be automatically selected.
• Auto paper select mode is cancelled if the auto zoom select function (page 52) is enabled or if a paper tray is
selected with the [PAPER SELECT] key. Auto paper select resumes operation when the [CA] key is pressed or
when "Auto clear" activates. Auto paper select mode can be disabled in the system settings. (Page 88)
when "Auto clear" activates. Auto paper select mode can be disabled in the system settings. (Page 88)
Removing the document cover
To copy large originals like newspapers, remove the
document cover. To remove the cover, lift it straight
up as shown. To replace the cover, do the reverse.
The SPF cannot be removed.
document cover. To remove the cover, lift it straight
up as shown. To replace the cover, do the reverse.
The SPF cannot be removed.
Copying books or originals with folds or
creases
creases
Press down on the SPF (or document cover) while
copying as shown. If the SPF (or document cover) is
not completely closed, shadows may appear on the
copy or it may be fuzzy. Straighten originals with
folds or creases well before placing.
copying as shown. If the SPF (or document cover) is
not completely closed, shadows may appear on the
copy or it may be fuzzy. Straighten originals with
folds or creases well before placing.
Originals that can be used in the SPF
Originals from A5 to A3 (5-1/2" x 8-1/2" to 11" x 17") in
size and 56 g/m
size and 56 g/m
2
to 90 g/m
2
(15 lbs. to 24 lbs.) in weight
can be used. A maximum of 40 pages can be placed at
once. For originals that are B4 or larger (8-1/2" x 14" or
larger), a maximum of 30 pages can be placed at once.
once. For originals that are B4 or larger (8-1/2" x 14" or
larger), a maximum of 30 pages can be placed at once.
Originals that cannot be used in the SPF
The following originals cannot be used: These may
cause misfeeds or smudging and unclear images.
cause misfeeds or smudging and unclear images.
• Transparencies, tracing paper, other transparent
or translucent paper, and photographs.
• Carbon paper, thermal paper.
• Originals that are creased, folded, or torn.
• Glued originals, cut-out originals.
• Originals with binder holes.
• Originals printed using an ink ribbon (thermal transfer
• Originals that are creased, folded, or torn.
• Glued originals, cut-out originals.
• Originals with binder holes.
• Originals printed using an ink ribbon (thermal transfer
printing), originals on thermal transfer paper.
Points concerning the position of the printed copy image
Even if the same original is copied onto the same type of paper, differences in the original size, scanning location
(document glass or document feeder tray), selected paper tray, enlargement/reduction ratio, and other conditions
may cause the position of the printed copy image on the paper to vary.
As shown in the following example, when an original smaller than the paper size (for example, A5 original and A3
paper) is copied from the document glass, the position of the printed copy image on the paper is different when
paper from tray 1 is used (1) and paper from the bypass tray is used (2).
(document glass or document feeder tray), selected paper tray, enlargement/reduction ratio, and other conditions
may cause the position of the printed copy image on the paper to vary.
As shown in the following example, when an original smaller than the paper size (for example, A5 original and A3
paper) is copied from the document glass, the position of the printed copy image on the paper is different when
paper from tray 1 is used (1) and paper from the bypass tray is used (2).
• Make sure that there are no paper
clips or staples on the original.
• Straighten curled originals before placing
them in the document feeder tray. Curled
originals may cause misfeeds.
originals may cause misfeeds.
• If the margin shift function is being
used, the margin shift settings may
need to be changed. (Page 68)
need to be changed. (Page 68)
Note
A5
A3 paper
A3 paper
A5
copy image
A5
copy image
(1)
(2)
A3
A3
Pegasus-E_Copy_Ex.book 47 ページ 2009年7月22日 水曜日 午後2時4分
48
COPY FUNCTIONS
MAKING A COPY DARKER OR LIGHTER
The copy exposure can be adjusted as needed to the original. Three exposure modes are available: "AUTO",
"TEXT" and "PHOTO". When "TEXT" or "PHOTO" is selected, the exposure can be manually adjusted to 5 levels.
"TEXT" and "PHOTO". When "TEXT" or "PHOTO" is selected, the exposure can be manually adjusted to 5 levels.
Auto
This is the default exposure mode. In this mode, the characteristics of an original being copied are "read" by the
exposure system and exposure adjustments are made automatically. The exposure level is lowered for coloured
areas and background shadows.
exposure system and exposure adjustments are made automatically. The exposure level is lowered for coloured
areas and background shadows.
Text/photo
TEXT: This mode enhances low density areas of an original and suppresses high-density background areas to
make text more legible.
PHOTO: This mode provides clearer reproduction of halftones in photos.
1
Press the [EXPOSURE] key.
The copy exposure
screen will appear.
screen will appear.
2
Select the exposure mode that best
suits the original with the [
suits the original with the [
] or [
]
key.
The [EXPOSURE] key can also be pressed to select
the exposure mode.
the exposure mode.
3
Adjust the exposure level as needed
with the [
with the [
] or [
] key.
• The exposure level cannot be adjusted when
"AUTO" is selected.
• For a darker image, press the [
] key. For a lighter
image, press the [
] key.
• The default exposure levels for "TEXT" and
"PHOTO" can be set in the system settings.
4
Press the [OK] key.
To return to AUTO mode, press
the [EXPOSURE] key, select
"AUTO" with the [
the [EXPOSURE] key, select
"AUTO" with the [
] key, and
press the [OK] key.
100%
AUTO
When "PHOTO" is selected, "PHOTO
MODE DEFAULT" in the system settings
can be used to select the method for
expressing halftones. (Page 88)
MODE DEFAULT" in the system settings
can be used to select the method for
expressing halftones. (Page 88)
COP
AD
AD
AD
EXPOSURE
COLOUR MODE
PROGRAM
COLOUR MODE
PROGRAM
PAPER SELECT
RESOLUTION
RESOLUTION
RESOLUTION
RESOLUTION
COPY
SCAN
SCAN
FAX
EXPOSURE
AUTO
TEXT
PHOTO
PHOTO
AUTO
PQ
ACC
LEX SCAN
LEX SCAN
LEX SCAN
ED COPY
EXPOSURE
AUTO
AUTO
TEXT
PHOTO
AUTO
Note
Exposure level guidelines
1 to 2: Dark originals such as newspapers
3:
3:
Normal density originals
4 to 5: Text written in pencil or light colour
text
EXPOSURE
AUTO
AUTO
TEXT
PHOTO
AUTO
Note
GHI
PQRS
BACK
OK
AN
PY
Pegasus-E_Copy_Ex.book 48 ページ 2009年7月22日 水曜日 午後2時4分
49
COPY FUNCTIONS
4
SELECTING THE TRAY
By default the auto paper select function (page 47) operates, and thus the appropriate tray is automatically selected
when the original is placed on the document glass or in the document feeder tray, or when the original size is
specified. If you wish to use a tray other than the automatically selected tray (for example you wish to enlarge or
reduce the copy or use the bypass tray), press the [PAPER SELECT] key to select the desired tray.
when the original is placed on the document glass or in the document feeder tray, or when the original size is
specified. If you wish to use a tray other than the automatically selected tray (for example you wish to enlarge or
reduce the copy or use the bypass tray), press the [PAPER SELECT] key to select the desired tray.
Auto tray switching
If the tray runs out of paper during copying and there is another tray with the same size of paper and the same
feeding orientation (horizontal or vertical), the other tray is automatically selected and copying continues. Auto tray
switching can be disabled if needed. (Page 22)
feeding orientation (horizontal or vertical), the other tray is automatically selected and copying continues. Auto tray
switching can be disabled if needed. (Page 22)
SETTING THE NUMBER OF COPIES
Press the numeric keys to set the number of copies.
• The set number of copies appears in the display. A maximum of 999 copies (factory default setting) can be set.
• A single copy can be made even if "0" is displayed.
• A single copy can be made even if "0" is displayed.
Important note when making a large number of copies
If the number of sheets output to the centre tray exceed its maximum capacity (250 sheets when a job separator tray
kit is not installed, 150 sheets when a job separator tray kit is installed) during a copy job, the copy job will stop
temporarily. If this happens, promptly remove the copies and press the [OK] key to resume copying. The copy job
will step each time the number of sheets in the centre tray reach its maximum capacity.
Before starting a long copy run, remove any sheets that remain in the centre tray. During output of the copy job,
exercise care as the job may stop frequently due to the centre tray becoming full.
kit is not installed, 150 sheets when a job separator tray kit is installed) during a copy job, the copy job will stop
temporarily. If this happens, promptly remove the copies and press the [OK] key to resume copying. The copy job
will step each time the number of sheets in the centre tray reach its maximum capacity.
Before starting a long copy run, remove any sheets that remain in the centre tray. During output of the copy job,
exercise care as the job may stop frequently due to the centre tray becoming full.
• If the desired paper size does not appear, change the paper in a tray to the desired paper size. (Page 21)
• Automatic ratio selection (page 47) does not operate when the bypass tray is selected.
• Automatic ratio selection (page 47) does not operate when the bypass tray is selected.
• If you enter the wrong number, press the [C] key and enter the correct number.
• The limit for the number of copies can be changed in the system settings. (Page 88)
• The limit for the number of copies can be changed in the system settings. (Page 88)
COPY RATIO
ADDRESS
ADDRESS
ADDRESS
EXPOSURE
COLOUR MODE
PROGRAM
COLOUR MODE
PROGRAM
PAPER SELECT
RESOLUTION
RESOLUTION
RESOLUTION
RESOLUTION
AUTO
FO
BRO
Note
WXYZ
Note
Pegasus-E_Copy_Ex.book 49 ページ 2009年7月22日 水曜日 午後2時4分
50
COPY FUNCTIONS
SELECTING THE ORIGINAL SIZE
If you loaded a non-standard size* original or the original size was not correctly detected, set the original size manually.
Perform the following steps after placing the document in the document feeder tray or on the document glass.
Perform the following steps after placing the document in the document feeder tray or on the document glass.
1
Press the [SPECIAL FUNCTION] key.
The special function
screen will appear.
screen will appear.
2
Select "ORIG. SIZE ENTER" from the
menu with the [
menu with the [
] or [
] key.
3
Press the [OK] key.
The original size selection
screen will appear.
screen will appear.
4
Select the original size with the [
] or
[
] key.
The selected original size
is highlighted.
is highlighted.
• To select an inch original size, press the [
] key and
go to step 6.
• If you selected "SIZE INPUT", follow steps 4 through 6
of the procedure in "USING THE BYPASS TRAY TO
COPY A SPECIAL SIZE ORIGINAL" (page 51) to set
the horizontal and vertical dimensions of the original.
COPY A SPECIAL SIZE ORIGINAL" (page 51) to set
the horizontal and vertical dimensions of the original.
5
Press the [OK] key.
You will return to the base
screen and the selected original
size will appear in the original
size display.
screen and the selected original
size will appear in the original
size display.
Selecting an inch original size
6
Select the original size with the [
] or
[
] key.
To return to selection of AB original sizes, press the
[
[
] key to return to step 4.
7
Press the [OK] key.
You will return to the base
screen and the selected original
size will appear in the original
size display.
screen and the selected original
size will appear in the original
size display.
* Standard sizes:
The following sizes can be detected correctly: A3, B4, A4, A4R, A5 (11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x
11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"). If a non-standard size original is placed (including special sizes), the closest
standard size may be displayed, or the original size may not appear.
11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"). If a non-standard size original is placed (including special sizes), the closest
standard size may be displayed, or the original size may not appear.
Note
EXPOSURE
COLOUR MODE
COLOUR MODE
PAPER SE
RESOLUT
RESOLUT
COPY
SCAN
SCAN
SPECIAL
FUNCTION
LINE
DATA
DATA
ON LINE
SPECIAL FUNCTION
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
DISPLAY CONTRAST
PAPER SIZE SET
DISPLAY CONTRAST
PQ
ACC
LEX SCAN
LEX SCAN
LEX SCAN
ED COPY
SPECIAL FUNCTION
SPECIAL MODES
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
DISPLAY CONTRAST
DISPLAY CONTRAST
GHI
PQRS
BACK
OK
AN
PY
ORIG. SIZE ENTER
A3
B4
A4
A4
AB
ORIG. SIZE ENTER
A3
B4
A4
AB
To cancel an original size selection, press
the [CA] key.
the [CA] key.
OK
ORIG. SIZE ENTER
11x17
8 x14
8 x11
8 x11
1
2
1
2
INCH
OK
Note
Pegasus-E_Copy_Ex.book 50 ページ 2009年7月22日 水曜日 午後2時4分
Click on the first or last page to see other MX-M200D / MX-M200DK (serv.man7) service manuals if exist.