Sharp MX-M200D / MX-M200DK (serv.man7) User Manual / Operation Manual ▷ View online
39
2
ADJUSTING THE DISPLAY CONTRAST
The contrast of the display can be adjusted as explained below.
1
Press the [SPECIAL FUNCTION] key.
The special function
screen will appear.
screen will appear.
2
Select "DISPLAY CONTRAST" with
the [
the [
] or [
] key.
3
Press the [OK] key.
The display contrast
adjustment screen will
appear.
adjustment screen will
appear.
4
Adjust the contrast with the [
] or [
]
key.
To reset the contrast to the
default setting, press the [C]
key.
default setting, press the [C]
key.
5
Press the [SPECIAL FUNCTION] key.
You will return to the base
screen.
screen.
EXPOSURE
COLOUR MODE
COLOUR MODE
PAPER SE
RESOLUT
RESOLUT
COPY
SCAN
SCAN
SPECIAL
FUNCTION
LINE
DATA
DATA
ON LINE
SPECIAL FUNCTION
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
DISPLAY CONTRAST
PAPER SIZE SET
DISPLAY CONTRAST
PQ
ACC
LEX SCAN
LEX SCAN
LEX SCAN
ED COPY
SPECIAL FUNCTION
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
DISPLAY CONTRAST
GHI
PQRS
BACK
OK
AN
PY
DISPLAY CONTRAST
SPECIAL
FUNCTION
Pegasus-E_Copy_Ex.book 39 ページ ２００９年７月２２日 水曜日 午後２時４分
40
3
PERIPHERAL DEVICES AND
SUPPLIES
SUPPLIES
Optional equipment and supplies are explained in this chapter. To purchase optional equipment and supplies,
contact your authorised service representative.
contact your authorised service representative.
OPTIONAL EQUIPMENT
Convenient optional equipment can be installed on the machine as needed.
Yes: Can be installed.
No: Cannot be installed.
*1 The network expansion kit (MX-NB10) must be installed.
*2 The facsimile expansion kit (MX-FX10) must be installed.
*2 The facsimile expansion kit (MX-FX10) must be installed.
• As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
changes for product improvement without prior notice.
• Peripheral devices are normally optional, but are incorporated in some models as standard equipment.
MX-M160
MX-M160D
MX-M200D
Reversing single pass feeder (AR-RP10)
No
Yes
Yes
Single pass feeder (AR-SP10)
Yes
Yes
Yes
Document cover (AR-VR7)
Standard
Yes
Yes
250-sheet paper feed unit (AR-D34)
Yes
Yes
Yes
2 x 250-sheet paper feed unit (AR-D35)
Yes
Yes
Yes
Job separator tray kit (MX-TR10)
Yes
Yes
Yes
256MB expansion memory board (AR-SM5)
Yes
Yes
Yes
Facsimile expansion kit (MX-FX10)
Yes
Yes
Yes
8MB fax memory (AR-MM9)
Yes*
2
Yes*
2
Yes*
2
Network expansion kit (MX-NB10)
Yes
Yes
Yes
PS3 expansion kit (MX-PK10)
Yes*
1
Yes*
1
Yes*
1
Barcode font kit (AR-PF1)
Yes*
1
Yes*
1
Yes*
1
Flash memory kit (AR-PF2)
Yes*
1
Yes*
1
Yes*
1
Note
Pegasus-E_Copy_Ex.book 40 ページ ２００９年７月２２日 水曜日 午後２時４分
41
PERIPHERAL DEVICES AND SUPPLIES
3
REVERSING SINGLE PASS FEEDER / SINGLE PASS
FEEDER
FEEDER
For the names of the parts of the RSPF / SPF, see "PART NAMES AND FUNCTIONS" (page 12).
Specifications
*1 Two-sided scanning is not possible.
*2 During one-sided copying
*2 During one-sided copying
250-SHEET PAPER FEED UNIT / 2 X 250-SHEET
PAPER FEED UNIT
PAPER FEED UNIT
• The 250-sheet paper feed unit provides a tray that can hold 250 sheets (80 g/m
2
(20 lbs.)) of plain paper.
• The 2 x 250-sheet paper feed unit provides two trays that can each hold 250 sheets (80 g/m
2
(20 lbs.)) of plain
paper.
Loading paper in the 250-sheet paper feed unit / 2 x 250-sheet
paper feed unit
paper feed unit
The method of loading paper is the same as for the paper trays on the machine (see the explanation on page 18).
Specifications
Model
AR-SP10
AR-RP10
Acceptable
originals
originals
Weight
56 g/m
2
to 90 g/m
2
(15 lbs. to 24 lbs.)
Original sizes
A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Capacity
Up to 40 sheets (thickness 4 mm (11/64") or less) (for B4 (8-1/2" x 14") or larger
originals, up to 30 sheets)
originals, up to 30 sheets)
Detectable original sizes
A5, A4, A4R, B4, A3
(5-1/2" x 8-1/2"*
(5-1/2" x 8-1/2"*
1
, 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17")
Original exchange speed*
2
When installed on MX-M160/MX-M160D: 16 pages/min.
When installed on MX-M200D: 20 pages/min.
When installed on MX-M200D: 20 pages/min.
Weight
5.3 kg (11.7 lbs.)
5.4 kg (12.0 lbs.)
Dimensions
586 mm (W) x 440 mm (D) x 132 mm (H) (23-5/64" (W) x 17-21/64" (D) x 5-13/64" (H))
If you change the size of paper loaded in the tray, you must change the tray's paper size setting. Change the
setting as explained in "CHANGING THE PAPER SIZE SETTING OF A TRAY" on page 21.
setting as explained in "CHANGING THE PAPER SIZE SETTING OF A TRAY" on page 21.
Model
AR-D34
AR-D35
Paper size
B5, B5R, A4, A4R, B4, A3, 8-1/2" x 11"R, 8-1/2" x 11, 8-1/2" x 13", 8-1/2" x 14", 11" x 17"
Paper
capacity
capacity
Approximately 250 sheets (80 g/m
2
(20 lbs.)) x
1 tray
Approximately 250 sheets (80 g/m
2
(20 lbs.)) x
2 trays
Paper weight
56 g/m
2
to 90 g/m
2
(15 lbs. to 24 lbs.)
Power supply
Supplied from the machine
Dimensions
590 mm (W) x 478 mm (D) x 96 mm (H)
(23-15/64" (W) x 18-53/64" (D) x 3-25/32" (H))
(23-15/64" (W) x 18-53/64" (D) x 3-25/32" (H))
590 mm (W) x 478 mm (D) x 182 mm (H)
(23-15/64" (W) x 18-53/64" (D) x 7-11/64" (H))
(23-15/64" (W) x 18-53/64" (D) x 7-11/64" (H))
Weight
4.9 kg (10.8 lbs.)
9.7 kg (21.4 lbs.)
Note
Pegasus-E_Copy_Ex.book 41 ページ ２００９年７月２２日 水曜日 午後２時４分
42
PERIPHERAL DEVICES AND SUPPLIES
STORAGE OF SUPPLIES
Standard supplies for this product that are to be replaced by the user are paper and toner cartridge.
PROPER STORAGE
● Store the supplies in a location that is:
clean and dry,
at a stable temperature,
not exposed to direct sunlight.
at a stable temperature,
not exposed to direct sunlight.
● Store paper in the wrapper and lying flat.
Paper stored out of the wrapper or in packages
standing on end may curl or get damp, resulting in
paper misfeeds.
standing on end may curl or get damp, resulting in
paper misfeeds.
For best copying results, be sure to use only SHARP Genuine Supplies which are
designed, engineered and tested to maximize the life and performance of SHARP copiers.
Look for the Genuine Supplies label on the toner package.
designed, engineered and tested to maximize the life and performance of SHARP copiers.
Look for the Genuine Supplies label on the toner package.
GENUINE SUPPLIES
Supply and Consumables
The supply of spare parts for a repair of the appliance is guaranteed for at least 7 years following the termination of production.
Spare parts are those parts of the apparatus which may break down within the scope of the ordinary use of the product -
whereas those parts which normally exceed the life of the product are not to be considered as spare parts. Consumables too,
are available for 7 years following the termination of production.
Spare parts are those parts of the apparatus which may break down within the scope of the ordinary use of the product -
whereas those parts which normally exceed the life of the product are not to be considered as spare parts. Consumables too,
are available for 7 years following the termination of production.
Pegasus-E_Copy_Ex.book 42 ページ ２００９年７月２２日 水曜日 午後２時４分
Click on the first or last page to see other MX-M200D / MX-M200DK (serv.man7) service manuals if exist.