DOWNLOAD Sharp MX-FX15 Service Manual ↓ Size: 598.64 KB | Pages: 57 in PDF or view online for FREE

MX-FX15  FAX SOFTWARE SWITCH  2 – 21

116

1

Transmission

Automatic reduced 
transmission

In cases where the transmitted document size (width) is larger than the FAX 
paper size (width) of the other party’s machine, this setting determines whether 
to reduce the transmitted document or to cut off both edges.
"0": Transmit in reduced size
"1": Do not transmit in reduced size

FAX transmission 
setting

2

Transmission

Rotated transmission 
selection (A4 

 A4R)

Rotated transmission or not depending on orientation of the document.
When transmitting A4 document, this setting determines whether to transmit as 
A3 width (A4) or to rotate the read image and transmit as A4 width (A4R).
"0": Rotate
"1": Do not rotate

FAX transmission 
setting

3

Transmission

Rotated transmission 
selection (B5R 

 B5)

Rotated transmission or not depending on orientation of the document.
When transmitting B5R document, this setting determines whether to transmit 
as A4 width (B5R) or to rotate the read image and transmit as B4 width (B5).
"0": Rotate
"1": Do not rotate

FAX transmission 
setting

4

Transmission

Rotated transmission 
selection (A5R 

 A5)

Rotated transmission or not depending on orientation of the document.
When transmitting A5R document, this setting determines whether to transmit 
as A4 width (A5R) or to rotate the read image and transmit as A4 width (A5).
"0": Rotate
"1": Do not rotate

FAX transmission 
setting

5

Transmission

Rotated transmission 
selection 
(8.5 x 11 

 8.5 x 11R) 

Rotated transmission or not depending on orientation of the document.
When transmitting 8.5 x 11 (LTR) document, this setting determines whether to 
transmit as A3 width (8.5 x 11) or to rotate the read image and transmit as A4 
width (8.5 x 11R).
"0": Rotate
"1": Do not rotate

FAX transmission 
setting

6

Transmission

Rotated transmission 
selection 
(16K 

 16KR) 

Rotated transmission or not depending on orientation of the document 
(16K

A4). 

When transmitting 16K document, this setting determines whether to transmit 
as A3 width (16K) or to rotate the read image and transmit as A4 width (16KR).
"0": Rotate
"1": Do not rotate

FAX transmission 
setting

7

Transmission

Rotated transmission 
selection (5.5 x 8.5R 

 

5.5 x 8.5)

Rotated transmission or not depending on orientation of the document 
(INVOICE

A5).

When transmitting 5.5 x 8.5R (INVOICE-R) document, this setting determines 
whether to transmit as A4 width (5.5 x 8.5R) or to rotate the read image and 
transmit as A4 width (5.5 x 8.5).
"0": Rotate
"1": Do not rotate

FAX transmission 
setting

8

Transmission

Page number printing

Setting to determine whether or not to apply the page number (page number/
total pages in cases of memory transmission) in the area for printing date and 
source.
"0": Apply
"1": Do not apply

FAX transmission 
setting

117

1

Transmission

Designation of date 
and source printing 
position

Set the position for applying the date and transmission source on the top of the 
document when transmitting it.
"0": Outside of document (outside of send data)
"1": Inside of document (inside of send data)

FAX transmission 
setting

2

Transmission

Quick online/Memory 
transmission 
changeover (quick 
online transmission)

Setting to determine whether to put transmission into the quick online 
transmission mode or the memory transmission mode.
"0": Quick online transmission
"1": Memory transmission

FAX transmission 
setting

3

Transmission

Designation of date 
and source printing

Set whether or not to apply the date and transmission source on the top of the 
document when transmitting it.
"0": Apply
"1": Not apply
Not functionable in North America (always applied).

FAX transmission 
setting

4

Transmission

Re-call permitted when 
busy

Set to re-call when the other party of a transmission is busy or does not call in.
"0": Prohibited
"1": Permitted

FAX transmission 
setting

5-8

Transmission

Number of re-calls 
when busy

Set the number of re-calls to be made when the other party of a transmission is 
busy or does not call in.
This can be set from 1 to 14 (Taiwan: 1 to 15, Australia/New Zealand/
Singapore: 1 to 9, U.K./France/Germany/Sweden/Russia/South Africa: 1 to 10, 
Indonesia: 1 to 5, China: 1 to 3) times by binary inputting.
Number of recalls: Setting x once
The initial value is reverted to if a value outside of the setting range is set.

FAX transmission 
setting

MX-FX15  FAX SOFTWARE SWITCH  2 – 22

118

1-4

Transmission

Interval between re-
calls when busy

Set the interval until the next re-call when the line is busy during transmission.
This can be set from 1 to 15 (Taiwan/Indonesia: 4 to 15) minutes in 1-minute 
increments by binary inputting.
Re-call interval: Set value x 1 minute
The initial value is reverted to if a value outside of the setting range is set.

FAX transmission 
setting

5-8

Transmission

Number of re-calls at 
times of 
communication error

Set the number of re-calls to be made when a communication error occurs 
during transmission.
This can be set from 1 (Taiwan: 1 to 15, U.K./France/Germany/Sweden/
Indonesia/Middle East/Russia/South Africa: 1 to 5, China: 1 to 3, Malaysia/
India: 1 to 9) times by binary inputting.
Number of recalls: Setting x once
The initial value is reverted to if a value outside of the setting range is set.

FAX transmission 
setting

119

1-4

Transmission

Re-call interval at 
times of 
communication error

Set the interval until the next re-call when communication error occurs.
This can be set from 1 to 15 (Indonesia: 4 to 15) minutes in 1-minute 
increments by binary inputting.
Number of recalls: Setting x once
The initial value is reverted to if a value outside of the setting range is set.

FAX transmission 
setting/
Adjustment value

5

Transmission

Re-call permitted at 
times of 
communication error

Set whether or not to re-call when a communication error occurs during 
transmission.
"0": Prohibited
"1": Permitted

FAX transmission 
setting

6, 7

Reception

Reception mode 
setting

Setting to determine whether to put the reception mode into automatic or 
manual.
(Do not set manual reception when the handset or external telephone are not 
connected. However, setting is possible and reception can be performed by 
means of the on-hook key).
In the manual reception mode, when the nighttime FAX mode is ON, the 
machine is activated but no calls arrive.
Even if the external telephone setting is not made, answerphone connection 
can be set from the soft SW.
"00": Automatic reception
"01": Manual reception
"10": Answerphone connection
The initial value is reverted to if a value outside of the setting range is set.
Setting can be made even without the external telephone and handset.

Reception/
forwarding setting

8

Not used

120

1, 2

Reception

Specified number 
reception Enable/
Disable setting (FAX)

Setting to determine Enable/Disable of the specified number reception (FAX).
However, only valid during automatic reception.
"00": All Disable
"01": Reception Enable
"10": Reception Disable
"11": All Disable
However, implement using a separate SW (Setting to refuse reception at times 
of manual reception (FAX)) when receiving manually.

FAX reception 
setting

3

Function

Automatic reduced 
printing to fixed sizes

If a size in excess of the valid printing area is received, this setting determines 
whether or not to automatically reduce size. If size is not reduced, the 
excessive area is discarded without being printed.
"0": Reduce
"1": Do not reduce (discard)
The reduction factor is set using the separate SW (Magnification setting in 
automatic reduction).

FAX reception 
setting

4

Function

Setting to reduce and 
discard when printing 
A3-11 x 17 (reduced 
printing setting when 
receiving A3)

Setting to determine whether to reduce to 11 x 17 inch size sheet or to print 
without reducing in cases of receiving A3 wide document when 11 x 17 inch 
size sheet is set.
"0": Reduce
"1": Do not reduce (discard)
When not reducing, the area that cannot be printed is scrapped.
When set to "Reduce," the overall data are reduced to 94%.

FAX reception 
setting

5

Function

Reduced print setting 
when receiving letters.

Setting to determine whether to reduce to A4 size sheet or to print without 
reducing in cases of receiving 8.5 x 11 (LTR) when A4 size sheet is set.
"0": Reduce
"1": Do not reduce (discard)
When not reducing, the area that cannot be printed is scrapped.
When set to "Reduce," the overall data are reduced to 94%.

FAX reception 
setting

6

Print

Double-faced printing 
of received data 
(double-faced 
reception setting)

Setting to determine whether received data are printed on both sides.
"0": Double-faced printing prohibited
"1": Double-faced printing permitted

FAX reception 
setting

7, 8

Print

Setting of received 
data print conditions

Setting for selecting the optimum sheet when printing data received by FAX.
"00": Equal magnification/Reduction permitted
"01": Equal magnification (division/reduction prohibited)
"10": Equal magnification/Division permitted
The initial value is reverted to if a value outside of the setting range is set.
Setting for selecting the optimum sheet when printing data received.

FAX reception 
setting

MX-FX15  FAX SOFTWARE SWITCH  2 – 23

121

1, 2

Not used

3

Print

Staple setting

Set to determine whether or not to staple when outputting received FAX data.
"0": No
"1": Yes

Device setting

4, 5

Print

Staple position

With the finisher attached, set the staple position for when conducting stable 
output of FAX printed data.
"00": Rear 1 point
"01": Front 1 point
"10": Center 2 points
"11": Staple free staple
When "Bottom one position" is set, "parallel" and "Slant" are selected with 
SW90-6.

Device setting

6

Not used

7, 8

Print

Selection of delivered 
sheet size

Sheet size setting when conducting stable output of FAX/Internet FAX printed 
data with the finisher attached.
"00": A4 or A3 (8.5 x 11 or 11 x 17)
"01": B5 or B4 (8.5 x 11 or 8.5 x 14)
"10": A4 (8.5 x 11)
"11": A4R (8.5 x 11R)

FAX reception 
setting

122

1

Transmission

Polling protection

Set to determine whether or not to execute protection when the other party 
requests polling.
"0": Protect
"1": Do not protect
When the protection setting is selected and a request for polling is received 
from the other party’s machine, bulletin board transmission is conducted if the 
source number of the other party coincides with the number permitted for 
polling.
When the setting not to protect is selected, bulletin board transmission is 
executed regardless of the source number of the other party.

Polling protection 
setting

2-8

Not used

123

-

127

1-8

Not used

128

1-3

Not used

4

Internet FAX

Setting of the internet 
FAX mail content 
(Footer)

Setting to determine whether the mail footer registered from the web is added 
to the content or not in sending the internet FAX.
"0": The footer is not added.
"1": The footer is added. 

Internet FAX initial 
setting

5

Internet FAX

Internet FAX coding 
system priority 
selection 
(Coding system for 
manual input) 
(Coding system for 
one-touch registration)

The standard compression system for sending operation of internet FAX can be 
set. 
"0": MH (G3)
"1": MMR (G4)
* The compression system for address registration is fixed to "MH (G3)" and is 

not linked with this item. 

This item is linked with the system setting, the FAX, the image send setting, the 
internet FAX setting, and "the standard compression system setting" of the 
internet FAX initial setting.

Internet FAX initial 
setting

6

Internet FAX

Processing at times of 
mail reception (when 
the Content-X-
CIAJWNETFAX field is 
not yet received) 

Setting to determine whether or not to print the mail text in cases where there is 
no "CONtent-X-CIAJWNETFAX" in the mail field when mail is received by 
Internet FAX.
"0": Do not print mail letters
"1": Print the main text of mails
Exclude confirmed sent mails

Internet FAX 
reception setting

7

Internet FAX

Setting of reduced 
printing when receiving 
A3 by Internet FAX

Setting to determine whether or not to print reduced to 11 x 17 inch sheet size 
when receiving A3 width documents when 11 x 17 inch size sheet is set in 
Internet FAX reception.
"0": Reduce
"1": Do not reduce (discard)
When not reducing, the area that cannot be printed is scrapped.
Reduce the overall document to 94% when conducting reduced printing.

Internet FAX 
reception setting

8

Internet FAX

Setting of reduced 
printing when receiving 
letters by Internet FAX

Setting to determine whether or not to print reduced to A4 size sheet when 
receiving 8.5 x 11 (letter) size documents when A4 size sheet is set in Internet 
FAX reception.
"0": Reduce
"1": Do not reduce (discard)
Reduce the overall document to 94% when conducting reduced printing.

Internet FAX 
reception setting

MX-FX15  FAX SOFTWARE SWITCH  2 – 24

129

1

Scanner

Setting of the mail 
content in E-Mail 
sending (Footer)

Setting to determine whether the mail footer registered from the web is added 
to the content or not in sending the Scan to E-Mail.
"0": The footer is not added.
"1": The footer is added.

E-mail setting

2

Scanner

Setting of transmitted 
data upper limit value 
(FTP/desktop/shared 
folder)

When transmitting to FTP, desktop or a shared folder, this setting determines 
whether or not to stop transmission of data as over the upper limit if the image 
data size of 1 job is found to be in excess of the value set for the "transmitted 
data upper limit (FTP/desktop/shared folder)."
"0": OFF
"1": ON

Scanner setting

3, 4

Scanner

Transmitted data upper 
limit (FTP/desktop/
shared folder)

This sets the upper limit for image data size in 1 job in cases where the 
transmitted data upper limit (FTP/desktop/shared folder) is set at "ON." 
"00": 50Mbyte
"01": 150Mbyte
"10": 300Mbyte
The initial value is reverted to if a value outside of the setting range is set.

Scanner setting

5

Not used

6

Function

Prohibition of 
forwarded table 
registration

Setting to determine whether to make the "Prohibition of forwarded table 
registration" function that can be registered from the Web valid or invalid.
"0": Permitted
"1": Prohibited
*3

(WEB) Management 
setting

7

Function

Prohibition of 
forwarded table 
correction

Setting to determine whether to make the "Prohibition of forwarded table 
correction" function that can be registered from the Web valid or invalid.
"0": Permitted
"1": Prohibited
*3

(WEB) Management 
setting

8

Function

Prohibition of 
forwarding permission 
revision

Setting to determine whether to make the "Prohibition of forwarding permission 
revision" function that can be registered from the Web valid or invalid.
"0": Permitted
"1": Prohibited
*3

(WEB) Management 
setting

130

1-5

Not used

6

Maintaining of the 
history of Image 
Sending Activity 
Report

On the printing contents in Image Sending Activity Report, the history is 
originally never printed again once it is printed out. However, the latest 50 
histories including the one that has been printed once will be printed when this 
feature is enabled.
“0”: Original operation (History which has been printed once will never be 
printed.)
“1”: Latest 50 histories including the one that has been printed once will be 
printed.

7, 8

Not used

131

-

138

1-8

Not used

139

1-8

Fax Output Tray 
Setting (Line 1)

Setting to determine the delivery tray for the output destination of FAX data 
received at Line1:
0: Center tray
1: Right tray
2: Finisher lower tray
3: Finisher upper tray
4: Finisher middle tray
5: Off-set tray
6: Top tray
7: Stacker top tray
8: Stacker top (expanded) tray
9: Stacker tray
10: Stacker (expanded) tray
11: Job separator (Upper tray)

140

-

150

1-8

Not used

: ‘16/Sep.