DOWNLOAD Sharp MX-FX15 Service Manual ↓ Size: 598.64 KB | Pages: 57 in PDF or view online for FREE

MX-FX15  FAX SOFTWARE SWITCH  2 – 13

91

1

Scanner

Setting of attaching 
"\ (back slash)" to a 
common folder name 
or a file name in 
ScanToSMB.

Setting to determine whether "\ (back slash)" is attached to the head of a file 
name or not.
"0": Not attached (When this setting is selected, the file name is as "common 
folder name\file name.")
"1": Attached (When this setting is selected, the file name is as "common folder 
name\\file name.")

2

Scanner

Secondary storage 
background process 
inhibit in scanner send 
(other than USB)

Setting to determine whether the secondary storage process in ScanToXXX is 
performed in the background or in the foreground with "Processing" displayed 
on the operation panel.
"0": Enable (Background process)
"1": Inhibit (Foreground process)

3

Scanner

Secondary storage 
background process 
when the send data 
upper limit setting is 
valid

Setting to determine whether the secondary storage process in ScanToXXX 
(except for ScanToUSB) when the send data upper limit setting is valid is 
performed in the background or in the foreground with "Processing" displayed 
on the operation panel.
"0": Disable (Foreground process)
"1": Enable (Background process)
When the soft SW62-2 "Secondary storage background process inhibit in 
scanner send (other than USB)" is set to "1: Inhibit," the process is made in the 
foreground regardless of this setting.

4, 5

Internet FAX

Setting of size 
selection in the internet 
FAX reception (AB 
series)

The paper sizes which can be selected in the paper selection of the internet 
FAX reception are set.
Since, in the paper selection for the internet FAX reception, only one paper size 
can be selected according to the received data width and the number of lines, a 
user who does not use B5 paper (does not load B5 paper in the cassette) 
cannot print until B5 paper is loaded. To avoid this inconvenience, the use can 
use this setting for the paper size prepared in the cassette.
"00": Selection from B5/A4/B4/A3
"01": Selection from A4/B4/A3
"10": Selection from A4/A3
"11": Selection from A5/B5/A4/B4/A3

6

Internet FAX

Valid/Invalid setting of 
Internet FAX A4, 8.5 x 
11 threshold

When printing received Internet FAX data with A4 and 8.5 x 11 paper in the tray, 
this setting determines whether to make threshold values in paper selection 
valid or invalid.
"0": Valid
"1": Invalid
Setting of FAX received data is performed by means of a separate SW.

7

Internet FAX

Setting of Enable/
Disable of the 
threshold value of the 
internet FAX Mexican 
legal, foolscap

Setting to change the print paper judgment.
When Mexican legal is received, if the automatic reduction is made, it may be 
printed in foolscap because of the small threshold value. When Enable, 
Mexican legal can be selected easily.
"0": Enable
"1": Disable
Setting of FAX received data is performed by means of a separate SW.

8

Internet FAX

Setting of Enable/
Disable of the 
threshold value of the 
internet FAX Mexican 
legal, legal

Setting to change the print paper judgment.
When Legal is received, if the automatic reduction is made, it may be printed in 
Mexican legal because of the small threshold value. When Enable, Legal can 
be selected easily.
"0": Enable
"1": Disable
Setting of FAX received data is performed by means of a separate SW.

MX-FX15  FAX SOFTWARE SWITCH  2 – 14

92

1

Internet FAX

Setting of text printing 
when receiving mails 
without attached files

Setting to determine whether or not to print mail texts when incoming mails do 
not have attached files.
"0": Do not print mail letters
"1": Print the main text of mails
 (Communication results error) 

2

Internet FAX

Report output (when 
reception is refused) 
<Internet FAX only>

Setting to determine whether or not to output the communication results sheet 
when reception is refused in Internet FAX reception. However, other than not 
printing is set by means of the report output (when receiving Internet FAX) 
setting.
"0": Do not output
"1": Output
FAX is set at "Report output (when reception is refused) <FAX only>." 
Irrespective of "Always print" and "Error," the results sheet is not printed.

3

Scanner

Display setting at times 
of NW trouble

Setting to determine whether or not to display on the operation panel when 
network trouble occurs while the NIC card is loaded.
"0": Display trouble
"1": Do not display trouble (do not display "CE-00" and "CE-01")

4

Internet FAX

Nighttime FAX mode 
setting <when Internet 
FAX product key is 
disabled>

Setting to determine whether or not to enter the minimum power consumption 
mode when the panel power SW is turned OFF.
Enable only when the internet FAX product key is disable. 
"0": Enter the nighttime FAX mode
"1": Do not enter the nighttime FAX mode
This soft SW is disable (does not function) when the external calculation mode 
is enable.
(SW63-6: Pseudo-nighttime mode setting <External calculation mode> 
functions.)

5

Not used

6

OSA

Pseudo-nighttime 
mode setting <External 
calculation mode>

Setting to determine whether the minimum low power consumption mode is set 
when the panel power switched is turned OFF in the OSA external calculation 
mode.
"0": Enter the pseudo-nighttime FAX mode (do not enter the nighttime mode)
"1": Do not enter the pseudo-nighttime FAX mode (enter the nighttime mode) 
Enable only when the external calculation mode is ON.
In the external calculation mode, the following soft switches are disable (do not 
function). 
SW63-4: Nighttime FAX mode setting <When the internet FAX product key is 
disable>
SW63-5: Pseudo-nighttime FAX mode setting <When the internet FAX product 
key is enable>

7

Function

Nighttime FAX mode 
setting <60W nighttime 
mode>

Setting to determine whether the FAX BOX power is not shut down when the 
panel power switch is turned OFF (In normal cases, it is notified in the F net, 
dial-in setting.)
"0": Do not enter the pseudo-nighttime FAX mode (60W is not notified) 
"1": Enter the pseudo-nighttime FAX mode (60W is notified)
Related soft SW:

SW63-4: Nighttime FAX mode setting 
<when Internet FAX reception is disabled>
SW63-5: Pseudo-nighttime mode setting 
<when Internet FAX reception is enabled>
SW63-6: Pseudo-nighttime mode setting 
<External calculation mode>

This soft SW is enable regardless of the external calculation mode. 

8

Not used

 Nighttime FAX mode:

 Pseudo-nighttime mode:

<Power status>

Resident power ON
Sub power OFF
Main power OFF

<Power status>

Resident power ON
Sub power ON
Main power ON

<Power SW status>

Main power SW: ON
Panel power SW: OFF

<Power SW status>

Main power SW: ON
Panel power SW: OFF or ON

Or

Power save mode (the power save key is pressed or in the auto power shut off state) 
(Either case will provide the conditions for the pseudo-nighttime mode.)

<Function>

When CI (calling) signal is detected from the FAX line, 
power can be supplied to the machine and the FAX BOX.

<Function>

The power is supplied to the machine (including SCU/PCU) and the FAX BOX or the 
HDD, and the panel light is turned OFF.
Under this condition, the following operations except for FAX scanning can be 
performed:
 FAX/NWS send, FAX receive/internet FAX receive, printer data receive, network 

 access, etc.

MX-FX15  FAX SOFTWARE SWITCH  2 – 15

93

1

Function

Background process 
when specifying the 
time

Setting to determine whether the secondary storage process in ScanToXXX 
(except for ScanToUSB) by specifying the time is performed in the background 
or in the foreground with "Processing" displayed on the operation panel.
When the soft SW62-2 "Secondary storage background process inhibit in 
scanner send (other than USB)" is set to "1: Inhibit," the process is made in the 
foreground regardless of this setting.
"0": Background process
"1": Foreground process

2

Function

Received data printing 
hold screen display 
setting

Setting to determine whether the print hold screen is displayed or not after 
entering the product key of the document service kit.
This setting can be changed only in the simulation mode.
"0": Enable (Displayed)
"1": Disable (Not displayed)

3

Function

Decode error process 
in printing the FAX/
Internet FAX reception 
data 

Setting of the process when a decode error occurs in printing the FAX/Internet 
FAX reception data.
"0": Judged as E7-06 trouble.
When a decode error is detected, it is judged as E7-06 trouble and printing is 
not completed. The image data of the decode error page are not deleted.
• When the power is turned OFF/ON, the received data can be printed again. 

(In case of E7-06 error, however, manual transfer cannot be performed.)

"1": Not judged as E7-06 trouble.
The area after the line of decode error is printed as white data. It is not 
processed as a trouble.

4

Not used

5

-

FFL address book 
renewal time stamp 
check setting

Setting is made to select YES/NO of checking the synchronization of time 
stamps between the address book renewal time in the printer driver and that in 
the MFP in the function flow light (FFL) function.
"0": Check is made.
"1": Check is not made.
* Since synchronization of renewal time stamps of the address books is made 

as a condition for the FFL function in order to prevent erroneous sending, 
this setting must be carefully made especially when changing. 

*2

6

Internet FAX

Setting of the 1W 
energy-save mode 
entering time when the 
POP3 confirmation 
function is enable.

Setting whether the machine enters the 1W energy-saving mode/1W nighttime 
mode according to the frequency confirmation time in the POP3 server 
frequency confirmation when the I-FAX function is ON.
"0": 3 minutes
"1": No limit
Incase of "0" above, if the POP3 server frequency confirmation time is within 3 
minutes, the machine does not enter the 1W mode but enters the pseudo 
energy-saving mode. 
In case of "1", the machine enters the pseudo energy-saving mode regardless 
of the POP3 server frequency confirmation time.
In addition, since the default of the POP3 server frequency confirmation time is 
5 minutes, the machine enters the 1W mode under the normal conditions. In 
order to keep the machine in the pseudo energy-saving mode, perform either of 
the following two methods:
• Change the POP3 server frequency confirmation timing to 3 minutes or less.
• Change this SSW to "1."
*2

7, 8

Not used

94

1-8

Not used

MX-FX15  FAX SOFTWARE SWITCH  2 – 16

95

1

Internet FAX

Size selection for 
internet FAX reception

Setting is made to select "Paper individual setting" or "Paper combination 
setting" in I-FAX reception.
1: 1: Paper individual setting (Follows SW95-2 - 6.)
0: 0: Paper combination setting (Follows SW91-4 - 5.) (Default)
* This soft SW is added according to requests from the market for combination 

of paper selection which is not available with SW91-4 and 5.
Example: Print in B4 only

2-6

Internet FAX

Size selection for 
internet FAX reception 
(Paper individual 
setting)

Setting is made to select whether each paper size is included as an option of 
the paper selection in the individual selection of paper when receiving I-FAX.
"Selected" 

 The paper size is included as an option of paper selection.

"Not selected" 

 The paper size is not included as an option of paper selection.

* This setting is valid when SW95-1 "Size selection for internet FAX reception" 

is set to "1: Paper individual setting". When, however, all of SW95-2 - 6 are 
set to "1: Not selected", SW95-1 functions as "0."

7

Function

White paper skip 
confirmation
Process after message 
time out

If the white paper skip function is set, when [START] button is pressed, the 
message is displayed confirming the document quantity actually scanned and 
that to be sent. This setting is made to select the job 60 sec after the above 
state. 
"1": The send job is performed.
"0": The job is cancelled. (Default)
*2

8

Function

Process after time out 
of the document 
quantity count 
confirmation

If the document quantity count function is ON, when scanning is completed with 
the document feed unit, the massage of the scanned document quantity is 
displayed. This setting is made to select the job 60 sec after the above state.
"1": The send job is performed.
"0" The job is canceled. (Default)
*2

96

1

Sequence setting of 
Time and Date added 
to the file name 
(Scanner/I-FAX)

Setting to determine the sequence of Year/Month/Day/Time if “Date & Time” is 
selected in File Naming setting when creating the file name of the scanned 
original with ScanToE-Mail/FTP/Desktop/SMB/USB/I-Fax.
“0”: Year/Month/Day/Time   Fixed("YYYYMMDD_HHMMSS") (Default)
“1”: According to the format setting of Date & Time in System Settings
e.g.: "YYYYMMDD_HHMMSS" (when 24-Hour is selected)
        "MMDDYYYY_HHMMSSPM" (when 12-Hour is selected)

2

Sequence setting of 
Time and Date added 
to the file name 
(InboundRouting)

Setting to determine the sequence of Year/Month/Day/Time if “Date & Time” is 
selected in File Naming setting when creating the file name of the original with 
InboundRouting.
“0”: Year/Month/Day/Time   Fixed("YYYYMMDD_HHMMSS") (Default)
“1”: According to the format setting of Date & Time in System Settings
e.g.: "YYYYMMDD_HHMMSS" (when 24-Hour is selected)
        "MMDDYYYY_HHMMSSPM" (when 12-Hour is selected)

3

Sequence setting of 
Time and Date added 
to the file name (Auto 
filling of received data)

Setting to determine the sequence of Year/Month/Day/Time if “Date & Time” is 
selected in File Naming setting when creating the file name of the original with 
Auto filling of received data.
“0”: Year/Month/Day/Time   Fixed("YYYYMMDD_HHMMSS") (Default)
“1”: According to the format setting of Date & Time in System Settings
e.g.: "YYYYMMDD_HHMMSS" (when 24-Hour is selected)
        "MMDDYYYY_HHMMSSPM" (when 12-Hour is selected)

4-8

Not used

97

-

98

1-8

Not used

99

1, 2

Calling

Tone/Pulse initial 
setting (Dial call signal 
setting)

This is set according to dial type.
"00": 10PPS (pulse)
"01": 20PPS
"10": TONE
"11": TONE
Other than China/Thailand: If "20pps" is set, adopt the initial TONE.

FAX initial setting/
Setting

3-6

Calling

Pause time setting 
(between dials)

This sets the time per pause inputted during dialling.
The pause time can be set from 1 to 15 seconds in 1-second increments by 
binary inputting N over the range of 0 to 15 (1 second x N). 
If a value outside the setting range (or "0000") is set, the initial value of 2 
seconds is reverted to.

FAX initial setting/
Adjustment value

7, 8

Calling

PBX setting

Setting to determine whether or not to send out ID or Flash before dialing.
Functions only in Germany and France.
In other countries, this setting is fixed to "OFF".
"00": OFF
"01": Flash
"10": ID
"11": Not used (OFF)
The setting other than the above would be granted as the default.

FAX initial setting

: ‘16/Sep.