Sharp MX-FX15 Service Manual ▷ View online
MX-FX15 FAX SOFTWARE SWITCH 2 – 9
Functions
33
1, 2
Transmission
Phase-C head dummy
data send time
data send time
Setting of the time to send the dummy data until sending the head data when
sending in Phase-C.
"00": 0.3 seconds
"01": 0.4 seconds
"10": 0.5 seconds
"11": 0.2 seconds
When the dummy data send time is increased, the remote machine which
receives data can easily detect high speed signals.
sending in Phase-C.
"00": 0.3 seconds
"01": 0.4 seconds
"10": 0.5 seconds
"11": 0.2 seconds
When the dummy data send time is increased, the remote machine which
receives data can easily detect high speed signals.
3
Communication
Error handling when
transmission and
receiving RTN
transmission and
receiving RTN
Setting to determine whether or not to recognize communication errors when
receiving RTN signals (only in the V.17 mode).
"0": Recognize errors during RTN reception
"1": Do not recognize error during RTN reception
receiving RTN signals (only in the V.17 mode).
"0": Recognize errors during RTN reception
"1": Do not recognize error during RTN reception
Setting
4, 5
Reception
SED ON level when
receiving
receiving
Setting of an indication of the receivable level when receiving FAX signals.
When noises are picked up and PPR occurs frequently, set to "-43dBm" or
greater. (For example, "-38dBm.")
"00: -48dBm
"01: -38dBm
"10: -33dBm
"11: -43dBm
When noises are picked up and PPR occurs frequently, set to "-43dBm" or
greater. (For example, "-38dBm.")
"00: -48dBm
"01: -38dBm
"10: -33dBm
"11: -43dBm
6, 7
Transmission
Transmission cable
amplitude equalizer
amplitude equalizer
When sending FAX signals, apply different gain from the frequency to the data
signals between the modem and line. Setting to determine how high to make
the 4000Hz gain compared to 0Hz.
"00": 0dB
"01": 4dB
"10": 8dB
"11": 12dB
Indispensable in Australia
signals between the modem and line. Setting to determine how high to make
the 4000Hz gain compared to 0Hz.
"00": 0dB
"01": 4dB
"10": 8dB
"11": 12dB
Indispensable in Australia
Communication/
Adjustment value
Adjustment value
8
Not used
34
1, 2
Reception
Receive cable
amplitude equalizer
amplitude equalizer
When FAX signals are received, a gain different from the frequency is applied
to the data signals between the MODEM and the line. Setting of how much
greater the gain of 4000Hz is set when compared with 0Hz.
"00": 0dB
"01": 4dB
"10": 8dB
"11": 12dB
to the data signals between the MODEM and the line. Setting of how much
greater the gain of 4000Hz is set when compared with 0Hz.
"00": 0dB
"01": 4dB
"10": 8dB
"11": 12dB
3-8
Not used
35
1-8
Not used
SW
No.
No.
Bit
No.
Item
SW selection and function
System settings
SW
No.
No.
Bit
No.
Item
SW selection and function
System settings
36
1, 2
Not used
3
Print
Print setting when
there is no
communication record
table data
there is no
communication record
table data
Setting to determine whether the record table is printed or not in the list printing
from the system when there is no record data (history) which have not printed
in printing of the communication record table.
The list printing from the system setting is as follows:
• Print output by selecting from the data list print
• Time specification print from the FAX setting or print at memory full
"0": Do not print
"No print data" is displayed and printing of a list is disabled.
"1": Print
A list is printed though there is no new history.
from the system when there is no record data (history) which have not printed
in printing of the communication record table.
The list printing from the system setting is as follows:
• Print output by selecting from the data list print
• Time specification print from the FAX setting or print at memory full
"0": Do not print
"No print data" is displayed and printing of a list is disabled.
"1": Print
A list is printed though there is no new history.
This setting is used to check that there is no new history.
4
Print
Report output (when
cancelled)
cancelled)
Setting to determine whether or not to output the communication results sheet
in cases where document transmission is cancelled while in progress.
"0": Do not output
"1": Output
in cases where document transmission is cancelled while in progress.
"0": Do not output
"1": Output
5
Print
Report output (when
refusing reception)
<FAX only>
refusing reception)
<FAX only>
Setting to determine whether or not to output the communication results sheet
when reception is refused in FAX reception. However, other than not printing is
set by means of the report output (when receiving) setting.
"0": Do not output
"1": Output
Internet FAX is set by means of SW63-2.
Irrespective of "Always print" and "Error," the results sheet is not printed.
when reception is refused in FAX reception. However, other than not printing is
set by means of the report output (when receiving) setting.
"0": Do not output
"1": Output
Internet FAX is set by means of SW63-2.
Irrespective of "Always print" and "Error," the results sheet is not printed.
6
Print
Printing of transmitted
document contents at
times of F code
communication
<FAX only>
document contents at
times of F code
communication
<FAX only>
Setting to determine whether or not to print part of the transmitted document on
the communication results sheet at times of F code communication. However,
only when the "Document contents printing at times of transmission" setting is
valid.
"0": Do not print
"1": Print
The "Document contents printing (results sheet) at times of transmission"
setting takes priority.
the communication results sheet at times of F code communication. However,
only when the "Document contents printing at times of transmission" setting is
valid.
"0": Do not print
"1": Print
The "Document contents printing (results sheet) at times of transmission"
setting takes priority.
MX-FX15 FAX SOFTWARE SWITCH 2 – 10
36
7
Print
Document content print
when sending (PC-Fax
(Internet Fax) report
table)
when sending (PC-Fax
(Internet Fax) report
table)
Setting to print images or not on the report table when sending PC-Fax
(Internet Fax).
"0": Not print
"1": Print
When the system setting is set so that images are added in the communication
report table, if the destination is a PC-Fax (Internet Fax), the document
contents are printed by this setting.
(Internet Fax).
"0": Not print
"1": Print
When the system setting is set so that images are added in the communication
report table, if the destination is a PC-Fax (Internet Fax), the document
contents are printed by this setting.
8
Not used
37
1, 2
Function
Protocol monitor
Setting to determine whether or not the protocol monitor (recognized by the
FAX) for 1 communication is printed.
"00": No (do not print)
"01": No (do not print)
"10": Print (always)
"11": Only at times of error (print)
When a new communication occurs before the protocol monitor is printed,
delete the old protocol data (overwrite).
FAX) for 1 communication is printed.
"00": No (do not print)
"01": No (do not print)
"10": Print (always)
"11": Only at times of error (print)
When a new communication occurs before the protocol monitor is printed,
delete the old protocol data (overwrite).
3
Function
Determination of sub-
scan length
(determination setting
when selecting the
page)
scan length
(determination setting
when selecting the
page)
Setting to determine whether to give priority to width or length when selecting
the optimum sheet when printing received data.
"0": Priority to data length
"1": Priority to data width
the optimum sheet when printing received data.
"0": Priority to data length
"1": Priority to data width
4
Print
Paper selection when
reception printing
(LTR/A4)
reception printing
(LTR/A4)
Used to set whether LTR is confirmed first of all in selection of paper for
reception printing or paper that provides smaller reduction rate of A4 and LTR is
selected.
"0": Priority on LTR/A4 reduction rate
"1": Priority on LTR
reception printing or paper that provides smaller reduction rate of A4 and LTR is
selected.
"0": Priority on LTR/A4 reduction rate
"1": Priority on LTR
5
Not used
6
Function
Valid/Invalid setting of
FAX A4, 8.5 x 11
threshold
FAX A4, 8.5 x 11
threshold
When printing received FAX data with A4 and 8.5 x 11 paper in the tray, this
setting determines whether to make threshold values in paper selection valid or
invalid. If made valid, it becomes easier to select letters.
"0": Valid
"1": Invalid
When printing received Internet FAX data, conduct setting using the separate
SW (Valid/Invalid setting of Internet FAX A4, 8.5 x 11 threshold).
setting determines whether to make threshold values in paper selection valid or
invalid. If made valid, it becomes easier to select letters.
"0": Valid
"1": Invalid
When printing received Internet FAX data, conduct setting using the separate
SW (Valid/Invalid setting of Internet FAX A4, 8.5 x 11 threshold).
7
Reception
Setting of the reception
width of 11x17 sheet
width of 11x17 sheet
This sets the receivable document width in cases where "11 x 17 sheet" is
selected as the FAX printing paper.
"0": A3 width (A3, B4, A4)
"1": B4 width (B4, A4)
selected as the FAX printing paper.
"0": A3 width (A3, B4, A4)
"1": B4 width (B4, A4)
8
Communication
Data line parity check
(Between ICU -
FAXBOX)
(Between ICU -
FAXBOX)
The parity on the data line between the ICU and the FAXBOX is checked.
(Supporting the E7-06 problem)
"0": Parity is checked.
"1": Parity is not checked.
(Supporting the E7-06 problem)
"0": Parity is checked.
"1": Parity is not checked.
38
1-4
Function
Magnification setting in
automatic reduction
automatic reduction
Setting to determine the page length for reduced printing of documents
received when automatic reduced printing is set at permitted.
Percentage threshold that can be reduced (excluding reduction between fixed
page sizes)
Setting can be made over the range of 85% to 100% in 1% increments by
binary inputting (N x 1% + 85%).
The initial value of 90% is reverted to if a value outside of the setting range is
set.
received when automatic reduced printing is set at permitted.
Percentage threshold that can be reduced (excluding reduction between fixed
page sizes)
Setting can be made over the range of 85% to 100% in 1% increments by
binary inputting (N x 1% + 85%).
The initial value of 90% is reverted to if a value outside of the setting range is
set.
5
Print
Rotated printing
Setting to determine whether or not to rotate and output received data when
this is possible at times of receiving and printing FAX and Internet FAX data.
"0": Permitted (rotate and print)
"1": Prohibited (do not rotate and print)
this is possible at times of receiving and printing FAX and Internet FAX data.
"0": Permitted (rotate and print)
"1": Prohibited (do not rotate and print)
6
Print
Designation of rotation
direction when printing
on both sides and the
rear side.
direction when printing
on both sides and the
rear side.
Setting to determine whether to adopt vertical binding or horizontal binding
when printing on both sides.
When horizontal binding is selected, the header position on both sides (front
and rear) is printed in the same direction.
When vertical binding is selected, since the image rotates by 180 degrees, the
header position is reversed.
"0": Horizontal binding
"1": Vertical binding
when printing on both sides.
When horizontal binding is selected, the header position on both sides (front
and rear) is printed in the same direction.
When vertical binding is selected, since the image rotates by 180 degrees, the
header position is reversed.
"0": Horizontal binding
"1": Vertical binding
7
Function
Setting of received
document output when
receiving
document output when
receiving
Setting to determine whether to output data received in FAX, Internet FAX
communications en masse or to output 1 page at a time as it is received.
"0": Save and output en masse following completion of reception
"1": Output 1 page at a time
communications en masse or to output 1 page at a time as it is received.
"0": Save and output en masse following completion of reception
"1": Output 1 page at a time
8
Print
Selection of error page
output when error
occurs during FAX
reception.
output when error
occurs during FAX
reception.
Setting to determine whether to output the error page or to not output it and
discard it in cases where communication errors occur during FAX reception.
"0": Output the error page
"1": Do not output the error page
However, in cases where errors occur during F code relay-instructed reception
or F code confidential reception, the error page is not outputted irrespective of
this SW setting.
discard it in cases where communication errors occur during FAX reception.
"0": Output the error page
"1": Do not output the error page
However, in cases where errors occur during F code relay-instructed reception
or F code confidential reception, the error page is not outputted irrespective of
this SW setting.
SW
No.
No.
Bit
No.
Item
SW selection and function
System settings
MX-FX15 FAX SOFTWARE SWITCH 2 – 11
39
1
Transmission
Selection of re-send
page at times of error
page at times of error
Select the page to be re-sent when errors occur during transmissions that do
not contain F code.
"0": Error page and onwards (re-send from the pages that have not been
transmitted to the other party’s machine).
"1": All pages (re-send from the first page including pages that have been
transmitted to the other party’s machine).
When transmitting in F code, all pages are re-transmitted irrespective of this
setting.
not contain F code.
"0": Error page and onwards (re-send from the pages that have not been
transmitted to the other party’s machine).
"1": All pages (re-send from the first page including pages that have been
transmitted to the other party’s machine).
When transmitting in F code, all pages are re-transmitted irrespective of this
setting.
2
Print
Selection of date and
transmission source
print language
<Format>
transmission source
print language
<Format>
Setting to determine the format of the date and transmission source attached
when transmitting FAX.
"0": Date format
"1": North American format
when transmitting FAX.
"0": Date format
"1": North American format
3
Print
Relay data output
Setting to determine whether or not to output documents received from the
relay command station when F code relay broadcast instructions are received.
"0": Output
"1": Do not output
relay command station when F code relay broadcast instructions are received.
"0": Output
"1": Do not output
4
Transmission
F code relay broadcast
FAX sender addition
setting
FAX sender addition
setting
Setting to determine whether the machine's sender is added or not when relay
broadcast send is performed to the FAX remote machines which are registered
in the machine (relay broadcast instruction receiving station) after receiving the
F code relay broadcast instruction is received from a remote machine.
This is in order to cope with the FAX circular specifications.
"0": Added
"1": Not added
broadcast send is performed to the FAX remote machines which are registered
in the machine (relay broadcast instruction receiving station) after receiving the
F code relay broadcast instruction is received from a remote machine.
This is in order to cope with the FAX circular specifications.
"0": Added
"1": Not added
5
Communication
F code communication
error handling
error handling
Setting to determine whether or not to re-send at times of F code
communication.
"0": Re-send
"1": Do not re-send
However, do not re-call in cases where the "Re-call permission at times of
communication error" setting is at "0: Prohibited."
Do not re-send when the other party’s machine does not have F code functions.
communication.
"0": Re-send
"1": Do not re-send
However, do not re-call in cases where the "Re-call permission at times of
communication error" setting is at "0: Prohibited."
Do not re-send when the other party’s machine does not have F code functions.
6
Transmission
F code password
transmission setting
when the other party’s
machine has no
password capacity
transmission setting
when the other party’s
machine has no
password capacity
Setting to determine the communication procedure in cases where the other
party’s machine has no F code password capacity when conducting F code
communication.
"0": Disconnect with DCN
"1": Send with password
party’s machine has no F code password capacity when conducting F code
communication.
"0": Disconnect with DCN
"1": Send with password
7
Function
Remaining receivable
memory
memory
Setting to determine whether to issue a call when remaining memory reaches
64KB or less or 128KB or less.
"0": 128KB
"1": 64KB
64KB or less or 128KB or less.
"0": 128KB
"1": 64KB
8
Function
External telephone
setting when no sound
is set
setting when no sound
is set
Setting to determine whether or not to use external telephone when no sound is
set.
When the no sound priority setting is made, reception operation is soundless
but communications cannot be sent to and from an external telephone.
When the external telephone priority setting is made, communications can be
sent to and from an external telephone, but reception operation sounds once.
"0": External telephone priority
"1": No sound priority
set.
When the no sound priority setting is made, reception operation is soundless
but communications cannot be sent to and from an external telephone.
When the external telephone priority setting is made, communications can be
sent to and from an external telephone, but reception operation sounds once.
"0": External telephone priority
"1": No sound priority
40
1
Not used
2
Reception
Setting to refuse
reception at times of
manual reception
(FAX)
reception at times of
manual reception
(FAX)
Setting to determine whether or not to validate refusal of reception of
designated numbers. However, only at times of manual reception.
"0": Receipt of designated number is not refused (invalid)
"1": Receipt of designated number is refused (valid)
However, at times of automatic reception, perform using a separate SW
(Setting to refuse reception at times of automatic reception).
Only valid in cases where the "Specified number reception Enable/Disable
setting (FAX)" is refused.
designated numbers. However, only at times of manual reception.
"0": Receipt of designated number is not refused (invalid)
"1": Receipt of designated number is refused (valid)
However, at times of automatic reception, perform using a separate SW
(Setting to refuse reception at times of automatic reception).
Only valid in cases where the "Specified number reception Enable/Disable
setting (FAX)" is refused.
3
Reception
TSI judgment setting
(no signal or all space)
when refusing
reception from
designated numbers
(no signal or all space)
when refusing
reception from
designated numbers
Setting to determine whether to refuse or permit reception when there are no
TSI signals from the other party’s machine or signals are all spaced in cases
where the refusal of designated number reception set by system setting is
valid.
"0": Reception will be permitted.
"1": Reception will be refused.
Only valid in cases where the "Specified number reception Enable/Disable
setting (FAX)" is refused.
TSI signals from the other party’s machine or signals are all spaced in cases
where the refusal of designated number reception set by system setting is
valid.
"0": Reception will be permitted.
"1": Reception will be refused.
Only valid in cases where the "Specified number reception Enable/Disable
setting (FAX)" is refused.
4
Reception
TSI judgment setting
(No numbers and no
space can be used.)
when refusing
reception from
designated numbers
(No numbers and no
space can be used.)
when refusing
reception from
designated numbers
Setting to determine whether to refuse or permit reception when TSI signals
from the other party’s machine are no numbers and no space can be used
reception set by system setting is valid.
"0": Reception will be permitted.
"1": Reception will be refused.
Only valid in cases where the "Specified number reception Enable/Disable
setting (FAX)" is refused.
from the other party’s machine are no numbers and no space can be used
reception set by system setting is valid.
"0": Reception will be permitted.
"1": Reception will be refused.
Only valid in cases where the "Specified number reception Enable/Disable
setting (FAX)" is refused.
SW
No.
No.
Bit
No.
Item
SW selection and function
System settings
MX-FX15 FAX SOFTWARE SWITCH 2 – 12
Others
40
5
Communication
PIN code
correspondence
correspondence
Setting to determine whether or not to limit FAX dial number display to 16 digits.
When this is set to "1: Correspond," FAX number display based on the resend
key and the other party’s number on the job status completion screen are
displayed from the start to the 16th digit. When this SW is set as valid, it is also
reflected in report contents.
"0": Do not correspond
"1": Correspond
FAX address display limit (displayed up to the 16th digit from the front)
When this is set to "1: Correspond," FAX number display based on the resend
key and the other party’s number on the job status completion screen are
displayed from the start to the 16th digit. When this SW is set as valid, it is also
reflected in report contents.
"0": Do not correspond
"1": Correspond
FAX address display limit (displayed up to the 16th digit from the front)
6-8
Not used
41
1
Not used
2
Function
Reversion from the
energy saving state
(excluding preheat)
when the external
telephone is off-hook
energy saving state
(excluding preheat)
when the external
telephone is off-hook
Setting to determine whether or not to revert from energy saving with the
external telephone off the hook in the energy saving state (excluding preheat).
"0": Do not revert
"1": Revert
external telephone off the hook in the energy saving state (excluding preheat).
"0": Do not revert
"1": Revert
3
Not used
4
Function
Scope of line sound
monitor
monitor
Setting to determine the scope of monitoring when the line monitor function is
used
When "Until NSF signal send/receive" is set, monitoring is conducted until the
DCS or NSF signal is received. When "All" is set, everything is monitored until
the line is disconnected.
"0": Until NSF signal send/receive
"1": All
Setting of line monitor sound ON/OFF is done by a separate SW.
used
When "Until NSF signal send/receive" is set, monitoring is conducted until the
DCS or NSF signal is received. When "All" is set, everything is monitored until
the line is disconnected.
"0": Until NSF signal send/receive
"1": All
Setting of line monitor sound ON/OFF is done by a separate SW.
5
Call arrival
V150V24 detection
setting
setting
Setting of detection when non-ringing setting is received.
"0": 24V detection
"1": 150V detection
"0": 24V detection
"1": 150V detection
6-8
Not used
42
-
89
1-8
Not used
SW
No.
No.
Bit
No.
Item
SW selection and function
System settings
SW
No.
No.
Bit
No.
Item
SW selection and function
System settings
90
1
Internet FAX
Addition of Content-X-
CIAJWNETFAX field
(in internet FAX send)
CIAJWNETFAX field
(in internet FAX send)
Setting to determine whether or not "CONtent-X-CIAJWNETFAX" is added to
the mail field in Internet FAX send. By adding this field, printing of the mail text
on the Internet FAX receiving side can be inhibited (however, this function is
only valid when the Internet FAX receiving side supports this field).
"0": Do not add field
"1": Add IGNORE
the mail field in Internet FAX send. By adding this field, printing of the mail text
on the Internet FAX receiving side can be inhibited (however, this function is
only valid when the Internet FAX receiving side supports this field).
"0": Do not add field
"1": Add IGNORE
2
Internet FAX
Resolution type of
internet FAX
internet FAX
This sets the type of reading resolution when sending Internet FAX.
"0": inch type
"1": mm type
"0": inch type
"1": mm type
3
Scanner
Setting of E-Mail
sending (Return
address)
sending (Return
address)
Setting to determine whether the return address is added or not when the mail
content is modified in returning Scan to E-Mail.
"0": Return address is not added.
"1": Return address is added.
content is modified in returning Scan to E-Mail.
"0": Return address is not added.
"1": Return address is added.
4
Scanner
Setting of E-Mail
sending (Header)
sending (Header)
Setting to determine whether the device name, the model name, and the
installing place are added to the header or not when the mail content is
modified in returning Scan to E-Mail.
"0": The header is not added.
"1": The header is added.
installing place are added to the header or not when the mail content is
modified in returning Scan to E-Mail.
"0": The header is not added.
"1": The header is added.
5
Internet FAX
Setting of internet FAX
sending (Return
address)
sending (Return
address)
Setting to determine whether the return address is added or not when the mail
content is modified in returning internet FAX.
"0": Return address is not added.
"1": Return address is added.
content is modified in returning internet FAX.
"0": Return address is not added.
"1": Return address is added.
6
Internet FAX
Setting of internet FAX
sending (Header)
sending (Header)
Setting to determine whether the device name, the model name, and the
installing place are added to the header or not when the internet FAX mail
content is modified.
"0": The header is not added.
"1": The header is added.
installing place are added to the header or not when the internet FAX mail
content is modified.
"0": The header is not added.
"1": The header is added.
7
Internet FAX
Selection of the
Internet FAX date and
transmission source
print language
<format>
Internet FAX date and
transmission source
print language
<format>
Setting to determine the format of the date and transmission source attached
when transmitting Internet FAX.
"0": Date format
"1": North American format
when transmitting Internet FAX.
"0": Date format
"1": North American format
8
Scanner
File name replacement
setting (ScanToXXX)
(Line break prohibit)
setting (ScanToXXX)
(Line break prohibit)
Setting to determine whether the codes registered in the US-ASCll are replaced
with "_" or not for the file name in ScanToXXX and the file name used as a link
destination of a hyper link mail.
"0": Not replaced
"1": Replaced (Replaced with "_")
with "_" or not for the file name in ScanToXXX and the file name used as a link
destination of a hyper link mail.
"0": Not replaced
"1": Replaced (Replaced with "_")
Click on the first or last page to see other MX-FX15 service manuals if exist.