Sharp MX-B382 (serv.man4) Handy Guide ▷ View online
MX-B382 Initial Setup
SHARP
Document Solution Centre
9
PRINT IMAGE POSITION & MAGNIFICATION
Automatic Adjustment:-
Sim 50-28
BK MAG ADJ (Main Scan Mag.)
SETUP/PRINT ADJ:(Lead, Offset, All)
Manual Adjustment:-
Sim 50-10
BK MAG (inside dimension) to 120mm
Sim 50-10
Image Off Centre Adjustment.
Sim 50-05
Printer Lead Edge & Void Adjust
COPY MAGNIFICATION & IMAGE POSITION
Automatic Adjustment:-
Sim 50-28
OC ADJUST
(Lead, Offset & Mag.)
Manual Adjustment:-
Sim 48-01
Magnification Adjustment (OC).
Sim 50-01
Lead/Rear Edge, Image Loss & Void.
Sim 50-12
OC Off Centre Adjust.
SPF IMAGE POSITION & VOID
Automatic Adjustment:-
Sim 50-28
SPF ADJ:(Lead, Offset & Sub scan)
Manual Adjustment:-
Sim 50-06
SPF Lead Edge Adjust.
Sim 50-12
SPF Off Centre Adjust.
ENGINE & PRINTER HALF-TONE - CALIBRATION
Sim 46-74
Engine & Printer Calibration.
Select FACTORY Mode.
Note: Both Engine & Printer Half Tone Calibration
must be completed.
IMAGE DENSITY CHECK
Sim 46-01
Copy Density Adjust. (Colour).
Sim 46-02
Copy Density Adjust. (B/W).
Sim 46-04
Scanner Density Adjust (Colour).
Sim 46-05
Scanner Density Adjust (Mono).
Sim 46-09
DSPF Copy Density Adjust.
MX-B382 Initial Setup
10
SHARP
Document Solution Centre
PRINTER DENSITY CHECK
Sim 64-05
PCL Density Test Page.
Sim 64-06
PS Density Test Page.
FAX OPTION (MX-FXX3)
Sim 66-02
Fax SW Setting (Destination).
Sim 66-10
Fax Memory Clear (For Extended Memory).
Sim 66-39
Fax Destination Set.
USB PORT SETTING
Set Active USB Port (MFP Control PWB DIP)
SW2 OFF (Front - Default), ON (Rear)
MFP STATUS DISPLAY
Sim 55-03
Toner Remaining Status Display
SSW 22, Data/Bit 5
(Change from 0 to 1)
OTHER
Sim 22-06
Data Simulation Print.
System Settings:
Adjust Clock (Set Date, Time & Time Zone).
Device Clone & Storage Backup:
Backup System Settings, Scan Destinations, User Control,
OSA Configuration after customer installation is complete.
MX-B382P Printer Setup
SHARP
Document Solution Centre
11
DEVELOPER SET-UP
Sim 25-02
Auto Developer Adjustment
Note:
DO NOT
INSTALL THE TONER CARTRIDGE.
For optimum image quality, it is recommended to
setup/install developer at the customer site.
Clean LSU Dust Proof Glass.
TONER INSTALLATION
Install K Toner.
INITIAL SETTINGS
Sim 26-06
Machine Destination.
Sim 26-35
Set Multi Error Counter Set to 1 (Multi Count).
Sim 26-52
Blank Page Counter Set-up.
Sim 26-65
Finisher Alarm Mode:-
Limit number of Copies in staple mode
(ON/OFF).
PRODUCT ACTIVATION & FIRMWARE
Activation of Optional Product(s):-
System Settings
– Administrator Mode – Product Key
Sim 22-05
Check Firmware version(s):- Upgrade to latest version
.
CASSETTE SETUP & PAPER TYPE
Set cassette size by adjusting the guides in the cassette:-
Paper Size & Type Setting:- System Settings
– Paper Tray Settings
IMAGE SKEW ADJUSTMENT
Sim 64-02
Image Writing Adjustment.
Set: A: 1 B: 1 C: 254 D: 255
PRINT IMAGE POSITION & MAGNIFICATION
Manual Adjustment:-
Sim 50-01
Lead/Rear Edge, Image Loss & Void.
Sim 50-05
Printer Lead Edge & Void Adjust.
MX-B382P Printer Setup
12
SHARP
Document Solution Centre
PRINTER DENSITY CHECK
Sim 64-05
PCL Density Test Page.
Sim 64-06
PS Density Test Page.
USB PORT SETTING
Set Active USB Port (MFP Control PWB DIP)
SW2 OFF (Front - Default), ON (Rear)
OTHER
Sim 22-06
Data Simulation Print.
System Settings:
Adjust Clock (Set Date, Time & Time Zone).
Device Clone & Storage Backup:
Backup System Settings,
OSA Configuration after customer installation is complete.
Click on the first or last page to see other MX-B382 (serv.man4) service manuals if exist.