Sharp MX-B382 (serv.man4) Handy Guide ▷ View online
Firmware Recovery
SHARP
Document Solution Centre
29
Firmware Recovery Procedure [Method 2]:-
1. Power off the machine.
2. Using a PC, copy the firmware file onto the root directory of the USB memory device.
2. Using a PC, copy the firmware file onto the root directory of the USB memory device.
3.
Rename the firmware file to “emupdate_f1.sfu”
Example shown:
BFR2_0200f2rom.sfu renamed to emupdate_f1.sfu
4. Insert the USB memory device into the machine and Power On.
The machine will “Boot” via the USB memory device and automatically detects and installs
the firmware
the firmware
– the operation display will also switch to “service” mode.
5. Once the firmware update has been installed successfully, power off the machine and
remove the USB memory device.
Note:
After firmware recovery, rename the firmware file “emupdate_f1.sfu” back to the original
filename to avoid any confusion of sending incorrect firmware to the MFP
After firmware recovery, rename the firmware file “emupdate_f1.sfu” back to the original
filename to avoid any confusion of sending incorrect firmware to the MFP
–
ie. Do not send MX-C311 firmware to MX-B382 machine etc.
Firmware Recovery is complete:
Firmware Recovery is complete:
E-Manual Update
30
SHARP
Document Solution Centre
1. Using a PC, copy the E-Manual Update directory onto the root of a USB memory device
(as shown).
Caution: When copying the E-Manual firmware/directories onto the USB drive,
do not change the folder hierarchy or files.
2. Insert the USB memory device into an active USB port on the machine and execute
Test Simulation 49-03.
Note:
“If no USB device is detected, an error message will be displayed.
For MX-B382 Only:-
Select the Directory containing the update files - example shown = MANUAL:-
E-Manual Update
SHARP
Document Solution Centre
31
For MX-B382P Printer Only:
To browse the required folder containing the MX-B382P E-Manual firmware, enter the
folder number and press the shortcut key on the operation panel.
Example shown:- Folder <DIR> MANUAL = 01.
3. The current and updated version should then be displayed:-
4. For MX-B382 only:-
Press Execute to commence E-Manual upgrade.
For MX-B382P Printer only:-
Use the Navigation Key to select Execute.
5. Update File Checking and a progress of the update will now be displayed:-
E-Manual Update
32
SHARP
Document Solution Centre
6. Once the update is complete, press OK to exit simulation mode.
E-Manual Upgrade is complete
Click on the first or last page to see other MX-B382 (serv.man4) service manuals if exist.