Sharp MX-B200 (serv.man8) User Manual / Operation Manual ▷ View online
9
85
IF A PAPER MISFEED OCCURS IN THE MAIN UNIT
WHILE USING THE SPF (Peripheral device)
WHILE USING THE SPF (Peripheral device)
If a paper misfeed occurs in the main unit paper path when making copies with
original(s) through the SPF, the SPF will automatically stop scanning. Manually
remove the misfed paper(s) in the main unit. You can check the number of originals
that must be returned to the document feeder tray in the display on the operation
panel. Follow the steps below to display the number of originals to be returned.
original(s) through the SPF, the SPF will automatically stop scanning. Manually
remove the misfed paper(s) in the main unit. You can check the number of originals
that must be returned to the document feeder tray in the display on the operation
panel. Follow the steps below to display the number of originals to be returned.
1
When a paper misfeed occurs in the
main unit, the SPF stops and the ZOOM
indicator blinks.
main unit, the SPF stops and the ZOOM
indicator blinks.
The remaining number of sets will blink in the
display.
Be sure to remove misfed paper(s) at the main
unit paper path first. Then follow the step 2
onwards.
display.
Be sure to remove misfed paper(s) at the main
unit paper path first. Then follow the step 2
onwards.
2
Remove any originals that have not yet
been scanned from the document
feeder tray.
been scanned from the document
feeder tray.
For the original(s) stuck in the SPF, do not
remove manually. This may cause a machine
malfunction. See the step 3.
remove manually. This may cause a machine
malfunction. See the step 3.
3
Press the copy ratio display (%) key.
The originals that were being scanned in the
SPF will be discharged and the number of
original sheets to be returned will blink in the
display.
Place the displayed number of original sheets
back in the document feeder tray together with
the original sheets removed in step 2.
SPF will be discharged and the number of
original sheets to be returned will blink in the
display.
Place the displayed number of original sheets
back in the document feeder tray together with
the original sheets removed in step 2.
The following procedure omits removal of the misfeed. Be sure to
remove the misfeed before displaying the number of originals to be
returned. For the misfeed removal procedure, see "MISFEED
REMOVAL" (p.80).
remove the misfeed before displaying the number of originals to be
returned. For the misfeed removal procedure, see "MISFEED
REMOVAL" (p.80).
If "SPF automatic original discharge time" is enabled in the user
programs, the originals in the SPF will be automatically discharged after
the set time elapses. ("USER PROGRAMS" (p.63))
programs, the originals in the SPF will be automatically discharged after
the set time elapses. ("USER PROGRAMS" (p.63))
Display of number of original
sheets to be returned
sheets to be returned
9
86
DEVELOPER REQUIRED
When the developer replacement required (
) indicator lights up, the developer
should be replaced. DEVELOPER REPLACEMENT SHOULD ONLY BE DONE BY
AN AUTHORISED SHARP SERVICE TECHNICIAN. Contact your authorised
service representative as soon as possible.
AN AUTHORISED SHARP SERVICE TECHNICIAN. Contact your authorised
service representative as soon as possible.
MAINTENANCE REQUIRED
When maintenance (
) indicator lights up, service by an authorised SHARP
service technician is required. Contact your authorised service representative as
soon as possible.
soon as possible.
10
87
10
SYSTEM CONFIGURATION
A number of options are available for the machine which allows you to configure a
system to meet your particular needs. The options include the following.
system to meet your particular needs. The options include the following.
SINGLE PASS FEEDER (MX-SP10)
The single pass feeder (SPF) hold up 50 originals for automatic feeding. For the
names of the parts of the SPF, see "PART NAMES" (p.4).
names of the parts of the SPF, see "PART NAMES" (p.4).
250-SHEET PAPER FEED UNIT (MX-CS10)
The paper feed unit provide the convenience of increased paper capacity for the
machine and a greater choice of paper size readily available for copying.
The procedures for loading paper in the
paper tray of paper feed unit, changing
the paper size, and selecting the paper
tray are same as for the paper tray in the
machine. See "LOADING THE PAPER
TRAY" (p.10) and "SELECTING THE
TRAY" (p.30).
machine and a greater choice of paper size readily available for copying.
The procedures for loading paper in the
paper tray of paper feed unit, changing
the paper size, and selecting the paper
tray are same as for the paper tray in the
machine. See "LOADING THE PAPER
TRAY" (p.10) and "SELECTING THE
TRAY" (p.30).
• Be sure to use only genuine SHARP parts and supplies.
• Some options may not be available in some countries and regions.
• Some options may not be available in some countries and regions.
For best copying results, be sure to use only SHARP products.
Only genuine SHARP consumables carry the Genuine Supplies label.
Only genuine SHARP consumables carry the Genuine Supplies label.
Single pass feeder
(MX-SP10)
(MX-SP10)
250-sheet paper
feed unit (MX-CS10)
feed unit (MX-CS10)
Lower side cover
Tray
OPTIONAL EQUIPMENT
88
10
Interface cable
Please purchase the appropriate cable for your computer.
USB interface cable
USB cable that supports USB 2.0.
Click on the first or last page to see other MX-B200 (serv.man8) service manuals if exist.