Sharp MX-B200 (serv.man8) User Manual / Operation Manual ▷ View online
6
53
Outline of Button Manager
Button Manager is a software utility that allows you to use the scanner function at the
machine. Button Manager allows you to configure six sets of scanning settings as a
scan menu on the machine.
To view Help for a setting, click the
machine. Button Manager allows you to configure six sets of scanning settings as a
scan menu on the machine.
To view Help for a setting, click the
button in the upper right-hand corner of the
window and then click the setting.
To begin scanning using the machine's operation panel, settings must be established
in the Control Panel after Button Manager is installed. For information on installing
Button Manager and establishing the Control Panel settings, see "SETTING UP
BUTTON MANAGER" (p.23). For information on scanning using the machine's
operation panel, see "SCANNING USING THE KEYS ON THE MACHINE" (p.50).
You can use Button Manager to select and change the functions of the six scan
menus. Refer to "Button Manager settings" (p.52).
To begin scanning using the machine's operation panel, settings must be established
in the Control Panel after Button Manager is installed. For information on installing
Button Manager and establishing the Control Panel settings, see "SETTING UP
BUTTON MANAGER" (p.23). For information on scanning using the machine's
operation panel, see "SCANNING USING THE KEYS ON THE MACHINE" (p.50).
You can use Button Manager to select and change the functions of the six scan
menus. Refer to "Button Manager settings" (p.52).
Tab
Click to set scan menu options. Each tab
contains scan settings for the scan menu.
"Application Selection" area
Select the start-up application here.
"Show TWAIN setting screen when
scanning" Checkbox
You can select whether or not the
TWAIN screen is shown. When the
checkbox is selected, the TWAIN screen
appears when scanning is executed to
let you adjust the scanning conditions.
"Scan Setup" area
Set the scan conditions.
Click to set scan menu options. Each tab
contains scan settings for the scan menu.
"Application Selection" area
Select the start-up application here.
"Show TWAIN setting screen when
scanning" Checkbox
You can select whether or not the
TWAIN screen is shown. When the
checkbox is selected, the TWAIN screen
appears when scanning is executed to
let you adjust the scanning conditions.
"Scan Setup" area
Set the scan conditions.
"OK" button
Click to save your settings and exit the
dialog box.
"Cancel" button
Click this button to exit the dialog box
without making any changes to the
settings.
"Apply" button
Click to save your settings without
closing the dialog box.
"Help" button
Click this button to display the help file
for Button Manager.
Click to save your settings and exit the
dialog box.
"Cancel" button
Click this button to exit the dialog box
without making any changes to the
settings.
"Apply" button
Click to save your settings without
closing the dialog box.
"Help" button
Click this button to display the help file
for Button Manager.
2
3
4
5
6
7
8
1
Some applications may limit
your choice of settings.
your choice of settings.
1
2
3
4
5
6
7
8
"Menu Name" is not used on this machine.
6
54
SCANNING FROM YOUR COMPUTER
The machine supports the TWAIN standard, making it possible to scan from TWAIN-
compliant applications. The machine also supports WIA (Windows Image
Acquisition), making it possible to scan from WIA-compliant applications and the
"Scanner and Camera Wizard" in Windows XP. For information on TWAIN and WIA
settings, see the help file for the scanner driver or Windows Help.
compliant applications. The machine also supports WIA (Windows Image
Acquisition), making it possible to scan from WIA-compliant applications and the
"Scanner and Camera Wizard" in Windows XP. For information on TWAIN and WIA
settings, see the help file for the scanner driver or Windows Help.
Scanning from a TWAIN-compliant application
The SHARP scanner driver is compatible with the TWAIN standard, allowing it to be
used with a variety of TWAIN-compliant applications.
used with a variety of TWAIN-compliant applications.
1
Place the original(s) that you wish to scan on the document
glass/SPF.
glass/SPF.
For the procedure for placing the original, see "ORIGINAL PLACEMENT"
(p.26).
(p.26).
2
After starting TWAIN-compliant application, click the "File"
menu and select a menu to scan.
menu and select a menu to scan.
3
Select "SHARP MFP TWAIN Y", and click the "Select" button.
4
Select the menu to acquire an image from the application's
"File" menu.
"File" menu.
The scanner driver setup screen will appear.
"Scanner driver settings" (p.56)
"Scanner driver settings" (p.56)
Scanning is not possible during a copy job.
The method for accessing the menu to select the scanner depends upon
the application. For more information, refer to the manual or the help file
of your application.
the application. For more information, refer to the manual or the help file
of your application.
• If you are using Windows XP/Vista/7, you can also select "WIA-
SHARP MX-xxxx" to scan using the WIA driver.
"Scanning from a WIA-compliant application (Windows XP/Vista/7)"
(p.58)
"Scanning from a WIA-compliant application (Windows XP/Vista/7)"
(p.58)
• Depending on your system, "SHARP MFP TWAIN Y 1.0 (32-32)" and
"WIA-SHARP MX-xxxx 1.0 (32-32)" may appear in the above "Select
Source" screen.
Source" screen.
6
55
5
In the "Scanning Source" menu, select the location where you
placed the original in Step 1.
placed the original in Step 1.
If you placed a one-sided original
in the SPF, select "SPF".
in the SPF, select "SPF".
6
Click the "Preview" button.
The preview image will appear.
7
Specify the scanning area and set the scan preferences.
For information on specifying the scan area and setting the scan
preferences, see scanner driver Help.
"Preview screen" (p.57)
preferences, see scanner driver Help.
"Preview screen" (p.57)
8
When you are ready to begin scanning, click the "Scanning"
button.
button.
To cancel a scanning job after clicking the "Scanning" button, press the
[Esc] key on your keyboard.
[Esc] key on your keyboard.
• If the angle of the image is not correct, reset the original, and click the
"Preview" button again.
• If the preview image is not oriented correctly, click the "Rotate" button
in the preview screen. This rotates the preview image 90 degrees
clockwise, allowing you to correct the orientation without resetting the
original. "Preview screen" (p.57)
clockwise, allowing you to correct the orientation without resetting the
original. "Preview screen" (p.57)
• If you set multiple pages in the SPF, the machine previews only the
top page of the originals, and then sends it to the original exit area.
Return the previewed original to the SPF before starting the scanning
job.
Return the previewed original to the SPF before starting the scanning
job.
Scanning a large area at high resolution results in a large quantity of
data and a prolonged scanning time. It is recommended that you set
appropriate scanning preferences for the type of original being scanned,
i.e., Monitor, Photo, FAX, or OCR.
data and a prolonged scanning time. It is recommended that you set
appropriate scanning preferences for the type of original being scanned,
i.e., Monitor, Photo, FAX, or OCR.
6
56
Scanner driver settings
The scanner driver setup screen consists of the "Set-up screen", which lets you select
scan settings, and the "Preview screen", which shows the scanned image. For details
on the scan settings, click the "Help" button in the preview screen to display Help.
scan settings, and the "Preview screen", which shows the scanned image. For details
on the scan settings, click the "Help" button in the preview screen to display Help.
"Scanning Source" menu
Select the location where the original is
placed. Selections are "Platen"
(document glass) or "SPF".
"Scanning from a TWAIN-compliant
application" (p.54)
"Scanning Mode" menu
Select "Standard" or "Professional" for
the scanning mode. For details on the
settings, click the "Help" button in the
preview screen to display Help.
"Zoom Preview" Checkbox
When this is selected, the selected part
of the preview image will be enlarged
when the "Preview" button is clicked. To
return to the regular view, remove the
checkmark.
Select the location where the original is
placed. Selections are "Platen"
(document glass) or "SPF".
"Scanning from a TWAIN-compliant
application" (p.54)
"Scanning Mode" menu
Select "Standard" or "Professional" for
the scanning mode. For details on the
settings, click the "Help" button in the
preview screen to display Help.
"Zoom Preview" Checkbox
When this is selected, the selected part
of the preview image will be enlarged
when the "Preview" button is clicked. To
return to the regular view, remove the
checkmark.
"Preview" button
Previews the document.
Previews the document.
"Scanning" button
Click to scan an original using the
selected settings. Before clicking the
"Scanning" button, make sure the
settings are correct.
Click to scan an original using the
selected settings. Before clicking the
"Scanning" button, make sure the
settings are correct.
"Close" button
Click to close the scanner driver setup
screen.
Click to close the scanner driver setup
screen.
2
3
4
5
6
1
Set-up screen
"Zoom Preview" can be used
when "Platen" is selected in
the "Scanning Source" menu.
when "Platen" is selected in
the "Scanning Source" menu.
1
2
3
If "Preview" is cancelled by
immediately pressing the [Esc]
key on your keyboard, or the
clear key on the machine,
nothing will appear in the
preview screen.
immediately pressing the [Esc]
key on your keyboard, or the
clear key on the machine,
nothing will appear in the
preview screen.
To cancel a scanning job after
clicking the "Scanning" button,
press the [Esc] key on your
keyboard, or the clear key on
the machine.
clicking the "Scanning" button,
press the [Esc] key on your
keyboard, or the clear key on
the machine.
4
5
6
Click on the first or last page to see other MX-B200 (serv.man8) service manuals if exist.