Sharp MX-6500N / MX-7500N (serv.man2) Handy Guide ▷ View online
Coin Vend Interface
25
Document Solutions After Sales Service
Connector Signals:
Pin No.
PCU PWB (CN17)
1
+ 24v
Out
2
GND
Out
3
CV_B/W_COPY
In
4
CV_COUNT
Out
5
CV_START
Out
6
CV_CA
Out
7
CV_COLOUR_ COPY
In
8
CV_COLOUR1
Out
9
CV_STAPLE
Out
10
CV_COLOUR0
Out
11
CV_DUPLEX
Out
12
5v
Out
13
CV_SIZE0
Out
14
CV_SIZE1
Out
15
CV_SIZE2
Out
16
CV_SIZE3
Out
Colour Signal:
Colour Mode
Colour Mode 1
(CL-COLOR0)
Colour Mode 2
(CL-COLOR1)
B/W
0
0
Full Colour
1
1
Others
(Single/Two Colour)
0
1
Paper Size Signals:
SIZE3
SIZE2
SIZE1
SIZE0
PAPER SIZE
0
0
0
0
NIL
0
0
1
0
A4
0
0
0
1
A3
1
0
1
1
A3W
0
0
1
1
LT
0
1
0
0
B4
0
1
0
1
LG
0
1
1
0
WLT
0
1
1
1
INV
1
0
0
0
B5
1
0
1
0
A5
1
0
0
1
EXTRA
Product Key Registration
26
Document Solutions After Sales Service
Procedure:
1. Make a note of the Copier Serial Number upon which the option is to be installed.
The serial number can be obtained from the following menu:-
Custom Settings – Admin Authentication (Password) – Product Key – Serial Number
2. Make a note of the Application number from the front of the option Operation Manual.
3. Access the following URL, with the user name and password indicated
https://dse-pub.sharp.co.jp/key/
User Name:
keyuser
Password:
key000323
4. Select your region (UK).
5. Register the option(s) against the Sharp Copier Serial Number by completing the following Web form.
As shown, multiple options can now be registered at the same time:-
Note: When inputting the data, please ensure that the prefix letter of the Application number is entered in
UPPERCASE. Also, if the machine serial number ends in X or Y, that must also be entered in UPPERCASE.
6. Click Send.
The Product Activation Key(s) will then be displayed. Also, an E-mail confirmation will
be sent to the E-Mail address of the dealer representative.
Enter the Product Key and enable the option(s) from within the following menu:-
Custom Settings – Admin Authentication (Password) – Product Key
Firmware Upgrade
27
Document Solutions After Sales Service
USB Device:
1. Insert the USB memory device containing the firmware file into the main USB Port.
2. Enter Simulation 49-01.
Note: “If no USB device is detected, an error message will be displayed.
3. Using the LCD screen, browse and select the correct firmware file.
4. The current and the new firmware version to be updated will be shown within
the display:
5. Select the required firmware that requires updating (example shown: Config & ICU Boot).
Press Execute & Yes to commence the update.
Note: If all firmware (including peripherals) require updating, select ALL
Firmware Upgrade
28
Document Solutions After Sales Service
6. Firmware update progress (and remaining time) should now be displayed:-
7. Once the firmware update has completed successfully, click OK (MFP should reboot).
Firmware update is complete.
Click on the first or last page to see other MX-6500N / MX-7500N (serv.man2) service manuals if exist.