Sharp MX-6500N / MX-7500N (serv.man10) Service Manual ▷ View online
MX-7500N MX-TR14 (EXIT TRAY UNIT) 12 – 1
MX-7500N
Service Manual
[12] MX-TR14 (EXIT TRAY UNIT)
1. Unpacking
A. Packed items check
2. Installation
NOTE: Before installation, be sure to turn both the operation and
main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
A. Cabinet removal
1) Remove the screws (3 pcs.) and remove the front cabinet
upper of the right door.
2) Remove the screws (2 pcs.) and remove the cabinet upper of
the right door.
3) Remove the screw (1 pc.), and remove the inner cover of the
right door.
No.
Name
Quantity
1
Right paper exit unit
1
2
ADU right upper cabinet R
1
3
ADU right upper cabinet F
1
MX-7500N MX-TR14 (EXIT TRAY UNIT) 12 – 2
4) Remove the screws (6 pcs.).
(1) Step screw, (2) P tight, (3) S tight
5) Remove the right paper exit section.
B. Right paper exit unit dummy removal
1) Remove the screws (4 pcs.), and remove the right paper exit
PG upper.
NOTE: When removing, be careful of the pawls.
2) Remove the screws (7 pcs.) and remove the right paper exit
unit dummy.
Ԙ
ԙ
Ԛ
Pawls
MX-7500N MX-TR14 (EXIT TRAY UNIT) 12 – 3
C. Right paper exit unit installation
1) Fix the right paper exit unit with the screws (3 pcs.), and
arrange the wires.
2) Fix the ADU right upper cabinets F/R with the screws (each 2
pcs.).
D. Right paper exit section and cabinet
installation
1) Attach the right paper exit PG upper to the original positions.
2) Attach the right paper exit section to the original positions.
2) Attach the right paper exit section to the original positions.
Connect the harness.
3) Attach the inner cover of the right door, the cabinet upper of
the right door and the front cabinet upper of the right door to
the original positions.
MX-7500N MX-TU14 (EXIT TRAY CABINET) 13 – 1
MX-7500N
Service Manual
[13] MX-TU14 (EXIT TRAY CABINET)
1. Unpacking
A. Packed items check
2. Installation
NOTE: Before installation, be sure to turn both the operation and
main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
A. Preparation of service parts
For MX-7500N/6500N, the followin g service parts needs to pre-
pare.
B. Paper exit tray attachment
1) Fix the rear cover with the screws.
2) Fix the front right cover with the screws.
Hook the front right cover.
3) Fix the exit tray cabinet to the machine with the screw (Packed
items).
No.
Name
Quantity
1
Exit tray cabinet
1
2
Front cover
1
3
Paper holding arm
1
4
Full detection actuator
1
5
Screw
2
6
E-ring
1
7
Rear cover
1
8
Front right cover
1
No.
Parts Name
Parts Code
1
Front right cover (For MX-7500N/6500N)
GCAB-1457FCZ1
Click on the first or last page to see other MX-6500N / MX-7500N (serv.man10) service manuals if exist.