DOWNLOAD Sharp MX-6500N / MX-7500N (serv.man10) Service Manual ↓ Size: 46.6 MB | Pages: 127 in PDF or view online for FREE

MX-7500N  MX-TU14 (EXIT TRAY CABINET)  13 – 2

Fit the rib part to the hole of the rear cover.  .  

1) Attach the front cover, and fix it with the E-ring.

1) Attach the paper holding arm and the full detection actuator.

 

MX-7500N  MX-RB12 (PAPER PASS UNIT)  14 – 1

MX-7500N

Service Manual

 

NOTE: Before installation, be sure to turn both the operation and

main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.

1) Remove the screw from the front cover right (Packed items

No.8) and remove the top cover.

2)

Install the front cover right top cover (Packed items of Main
machine), and fix the screw.

1)

Remove the deliverly sponge from the paper exit section as
the figure below.

NOTE: When removing the delivery sponge roller, take care not to

fall the fragment of it.

NOTE: If the fragment was fallen, never fail to remove it.

1)

Fix the L plate (Packed items No.5) to the main unit with the
screw (Packed items No.1).

2)

Install the front cover right (Packed items No.8), and fix the
screw (Packed items No.1).

1

M4 x 7 round-head bind screw

13

2

M4 x 10 mold tap screw

2

3

M4 x 10 S-tight bind screw

1

4

E-ring

1

5

L plate

1

6

Accuride rail

1

7

Paper guide

1

8

Front cover right

1

9

Front cover

1

10

Left cabinet

1

11

Relay unit

1

12

Band

2

1

2

3

4

5

6

7

8

9

10

11

12

TopPage

: ‘13/Nov

MX-7500N  MX-RB12 (PAPER PASS UNIT)  14 – 2

3) Install the paper guide (Packed items No.7), and fix the screw

(Packed items No.3).

4) Engage the accuride rail (Packed items No.6) to cut-out por-

tion of main frame. 
Install the accuride rail while pressing so that engage the pro-
jection of the main unit frame with the hole in rear side of the
accuride rail. Fix the accuride rail with the screw (Packed items
No.1).

1) Insert the rib of the left cabinet (Packed items No.10) into the

slit on the lower surface of the upper cabinet left. Fix the left
cabinet with the screw (Packed items No.1).

1) Pull out the slide rails.

2)

Place the paper pass unit on the slide rails, and fix it with the
screw (Packed items No.1). 
Push the paper pass unit into the main unit to install.

3)

Insert the front cover (Packed items No.9) to the supporting
point, and fix it with a E-ring (Packed items No.4).

4)

Install the band (Packed items No.12), and fix the screw
(Packed items No.2) to the front cover.

1)

Install the toner bottle, and close the front cover.

MX-7500N  MX-RB15 (CURL CORRECTION UNIT)  15 – 1

MX-7500N

Service Manual

 

NOTE: When moving the unit, use manpower of two or more per-

sons.

1) Remove fixing tape and fixing bracket from the decurler unit.

1

Screw 

(M3 x 6 RS tight)

10

10

10

4

4

6

2

Screw 

(M4 x 8 RS tight)

2

---

---

2

2

2

3

Screw 

(M4 x 7 Round tup)

2

2

2

2

2

2

4

Screw 

(M4 x 12 Bind)

4

4

4

4

4

4

5

M4 step screw

2

2

2

2

2

2

6

Connection plate F

1

1

1

1

1

1

7

Connection plate R

1

1

1

1

1

1

8

Earth bracket

1

1

---

1

1

1

9

Shunt cable 

connection plate

1

---

---

1

1

1

10

Rear upper cover

1

1

1

1

1

1

11

Paper guide A

1

---

1

1

1

1

12

Paper guide B

1

1

---

---

---

---

13

Paper guide C

1

1

1

---

---

---

14

Protection sheet

1

1

1

---

---

1

15

Top surface 

cushion

1

1

1

1

1

1

1

2

3

4

5

6

7

8

9

10

14

15

13

11

12

Cushion attachment 
position

Reference of cushion on.
(Rear screw hole tiered edge)

Reference of cushion on.
(Upper cabinet lower edge)