Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man7) Service Manual ▷ View online
MX-4070V MX-PN16B/C/D (PUNCH MODULE) 15 – 5
2)
Close the top cover.
3)
Close the front cabinet of the finisher.
4)
Incline upper part of the rear cabinet, hook the pawls of the rear
cabinet to the main unit and attach the rear cabinet.
cabinet to the main unit and attach the rear cabinet.
5)
Fasten 2 screws to rear cabinet of the finisher.
J. Labelling
1)
Put a punch position label (for scanner).
2)
Put a punch position label (for RSPF/DSPF).
K. Turn ON the power of the main unit
1)
Connect the power plug of the machine to the power outlet, and
turn ON the main power switch and the operation panel power
switch.
turn ON the main power switch and the operation panel power
switch.
Position of the pawls of the rear cabinet
and insertion slot on the finisher unit
and insertion slot on the finisher unit
Rear cabinet
Finisher unit
Use 2 screws for attachment.
)LWZLWKWKHFRUQHU5
/DEHODWWDFKPHQWUHIHUHQFH
&RUQHURIWKHXSSHU
FDELQHWERWWRP
)LWZLWKWKHFRUQHU5
DSPF
RSPF
R2.5 connection line
Edge line R 2.5
CAUTION
Cleaning of the document scan section
When streaks appear on copy or scan
images, open the automatic document
feed unit and clean the document scan
section with the glass cleaner (accessory).
Document scan section
MX-4070V MX-TR19 N (EXIT TRAY UNIT) 16 – 1
MX-4070V
Service Manual
[16] MX-TR19 N (EXIT TRAY UNIT)
1. Unpacking
A. Packed items check
2. Installation
Before installation, be sure to turn both the operation and main power
switches off and disconnect the power plug from the power outlet.
Make double sure that the data lamp on the operation panel does not
light up or blink when performing installation.
switches off and disconnect the power plug from the power outlet.
Make double sure that the data lamp on the operation panel does not
light up or blink when performing installation.
A. Right delivery unit dummy removal
1)
Open the right door.
2)
Remove the screws. Remove the right upper cabinet.
No.
Name
Quantity
1
EXIT TRAY UNIT
1
2
Right paper exit unit
1
3
Full detection actuator
1
4
M4×6S-tight
2
5
M4×10P-tight
1
6
Harness
(Not used)
1
3
4
5
1
2
6
MX-4070V MX-TR19 N (EXIT TRAY UNIT) 16 – 2
3)
Remove the screws. Remove the ADU PG PH.
B. Right delivery unit installation
1)
Attach the right delivery unit lower to the original positions. Fix the
right delivery unit lower with the screws (4 pcs.)
right delivery unit lower with the screws (4 pcs.)
M3x8 S-tight
A
M4x10 P-tight
B
M3x8 S-tight
C
M4x10 P-tight
D
M3x8 S-tight
A
M4x6 S-tight
B
M3x8 S-tight
C
M4x6 S-tight
D
MX-4070V MX-TR19 N (EXIT TRAY UNIT) 16 – 3
2)
Connect the harness. Insert the snap band.
3)
Connect the harness with the right delivery unit upper.
4)
Fix the right delivery unit upper with the screws (6 pcs.)
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man7) service manuals if exist.