DOWNLOAD Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man30) Service Manual ↓ Size: 58.19 MB | Pages: 127 in PDF or view online for FREE

BEFORE USING THE MACHINE►LOADING PAPER

A maximum of 1200 sheets of 8-1/2" × 11" (A4) paper can be loaded into tray 3 (left).
A maximum of 900 sheets of 8-1/2" × 11" (A4) and B5 paper can be loaded into tray 4 (right).

If you loaded paper of a different type or size from the paper previously loaded, be sure to check the settings in "Setting 
mode". An incorrect setting may cause print failure, printing on paper of an incorrect size, or type or paper misfeeds.

To check the type and size of paper:
In "Setting mode", select [System Settings] → [Common Settings] → [Paper Settings] → [Paper Tray Settings].

Do not place heavy objects on the tray or press down on the tray.

Gently pull the tray out until it stops.

Pull the handle until the lock is released.

Fan the paper well before loading it. If the paper is not 
fanned, multiple sheets may feed at once and cause a 
misfeed.

BEFORE USING THE MACHINE►LOADING PAPER

Load the paper with the print side facing up. The stack must 
not be higher than the indicator line (maximum of 1200 
sheets for tray 3, or maximum of 900 sheets for tray 4).

Push the tray firmly all the way into the machine slowly.

BEFORE USING THE MACHINE►LOADING PAPER

Use the bypass tray for printing on plain paper, envelopes, label sheets, tab paper, and other special media.
Up to 100 sheets of paper can be loaded (Heavy paper weighing between 28 lbs. bond and 140 lbs. index: 40 sheets, 
heavy paper weighing between 140 lbs. index and 110 lbs. cover: 20 sheets) for continuous printing, just like operation 
using other trays. 

Load paper up to 7-1/4" x 10-1/2" (A5) size in landscape orientation.

To print on tab paper, load tab paper into the bypass tray with the print side facing down.

• When using plain paper other than Sharp standard paper or special media other than SHARP-recommended transparency 

film, glossy paper, or when printing on the reverse side of paper that has been printed on one side, load paper one sheet 
at a time. Loading more than one sheet at a time will cause misfeeds. 

• Before loading paper, straighten any curling in the paper.
• When adding paper, remove any paper remaining in the bypass tray, combine it with the paper to be added, and reload as 

a single stack. If paper is added without removing the remaining paper, a misfeed may result. Loading more sheets than 
the specified number of sheets or the limit may cause paper misfeeds.

• Use only tab paper that is made of paper. Tab paper made of a material other than paper (film, etc.) cannot be used.
• To print on the tabs of tab paper: 

 In copy mode, use [Tab Copy] in "Others". In print mode, use the tab print function.

Side 2

BEFORE USING THE MACHINE►LOADING PAPER

When inserting envelopes in the bypass tray, place them aligned to the left side in the orientation shown below.
Only the front side of envelopes can be printed or copied on. Place the front side facing down.
Fold the flap and make a sharp crease at the fold.

• Use SHARP-recommended transparency film.
• When loading multiple sheets of transparency film into the bypass tray, fan the sheets several times before loading.
• When printing on transparency film, remove each sheet as it is printed and output from the machine. Allowing sheets to 

stack in the output tray may result in curling.

Oriented 

horizontally

Oriented 
vertically