Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man2) Handy Guide ▷ View online
SHARP
SHARP PRINT RELEASE
33
Configuring the CLIENT MFP:
1. Open the Device Webpage and enter the following menu (Administrators password will be required):-
System Settings – Printer Settings – Print Release Settings
2. Enable Print Release and configure the following settings:-
Connecting Code:
Enter the same connecting code (up to 32 digits) that was
entered for the Master MFP.
entered for the Master MFP.
Primary / Secondary Unit:
Select Secondary Unit (Client).
Address of Primary Unit:
Enter the IP Address of the Master MFP.
Port Number:
Enter the same Port Number as the Master MFP
Default setting is Port 53000.
Default setting is Port 53000.
Default Settings:
Enable if B/W Print is required as default?
Enable Print & Delete the Data so that the Users job is
automatically deleted when released (recommended)?
Configuring the PRINTER DRIVER:
1. Install the required MX-3050-6070N series Print Driver (PCL or PS) and setup the Printer Queue to the
MASTER MFP device.
2. When using Add Printer method, run Auto Configuration from the Configuration tab of Printer
Properties.
SHARP PRINT RELEASE
SHARP
34
3. Open the Printer Driver Printing Preferences, then the Job Handling menu and Check/Enable
Print Release.
If User Authentication is enabled for Sharp Print Release, select the Authentication method and enter
the User Number or Login/Password credentials (as indicated below):-
the User Number or Login/Password credentials (as indicated below):-
Add Print Release Button to MFP Home Screen:
1. Enter System Settings – Home Screen Settings menu.
2. Under Condition Settings, select the required Home Button and add Print Release – click Submit.
Sharp Print Release configuration is now complete.
SHARP
FIRMWARE UPDATE
35
USB MEMORY DEVICE:
1. Insert a USB memory device containing the firmware file (*.sfu) into the main USB Port.
2. Enter Simulation 49-01.
Note
When using Easy Mode, select Version Upgrade from the Installation tab and execute SIM49-01
Firmware Update.
In addition, if no USB device is detected, an error message will be displayed.
When using Easy Mode, select Version Upgrade from the Installation tab and execute SIM49-01
Firmware Update.
In addition, if no USB device is detected, an error message will be displayed.
3. Using the LCD screen, browse and select the updated engine firmware file (*.sfu):-
4. The current firmware versions will now be displayed, and the items that require updating will be
highlighted in
RED
(as indicated below):-
FIRMWARE UPDATE
SHARP
36
5. Select the required firmware that requires updating - Press Execute & Yes to commence the update.
Note: If all firmware (including peripherals) require updating, select ALL (as shown):-
6. The firmware update progress (and remaining time) should now be displayed:-
7. Once the firmware update has completed successfully, the MFP device will automatically reboot.
Firmware update via USB memory Device is complete.
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man2) service manuals if exist.