Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man2) Handy Guide ▷ View online
SHARP
MAINTENANCE
17
MX-30
x
0N
MX-35
x
0N
MX-40
x
0N
MX-5070N
MX-6070N
MX-6070N
PROCESS SECTION – COLOUR:
(Colour maintenance counter has reached the specified life).
(Colour maintenance counter has reached the specified life).
Every
150K
Every
300K
Every
200K
Every
400K
Every
200K
Every
400K
Replace Cyan, Magenta & Yellow OPC Drum: (MX-60GRSA x 3)
Replace Cyan, Magenta & Yellow Main Charge Kits:-
x
x
Main Charge Unit & Cleaning Blade (MX-407MK x 3)
x
x
x
x
Main Charge Unit & Cleaning Blade (MX-607MK x 3)
x
x
x
Replace C, M, Y Developer (MX-60GVSA).
x
x
x
x
Replace C, M, Y DV toner filter kit (MX-607FK x 3).
Clean LSU Dust Proof Glass (CMYK)
Sim 24-04
Clear Drum CTRG C, M, Y (Colour) Counters.
Clear Main Charger C, M, Y (Colour) Counters.
(MC Cleaner Counter is also cleared automatically)
Clear Drum Blade C, M, Y (Colour) Counters.
Clear Maintenance [Colour] Counter.
Sim 24-05
Clear Developer C, M, Y (Colour) Counters.
x
x
x
Remove ALL toner cartridges, prior to executing Sim 25-02.
x
x
x
Sim 25-02
Toner Concentration Adjustment - Select C, M, Y.
Note:
If ALL developer is replaced at the same time, select
CMYK. When Sim 25-02 is executed, the Developer
Counter (Sim 24-05) is also cleared automatically.
CMYK. When Sim 25-02 is executed, the Developer
Counter (Sim 24-05) is also cleared automatically.
x
x
x
Sim 44-27
Clear Half Tone Process Correction.
Every
200K
Every
400K
Every
250K
Every
500K
Every
250K
Every
500K
PROCESS SECTION -MONOCHROME:
(Total / K maintenance counter has reached the specified life).
(Total / K maintenance counter has reached the specified life).
Replace Black OPC Drum (MX-60GRSA).
Replace Black Main Charge Kit:-
x
x
Main Charge Unit & Cleaning Blade (MX-407MK)
x
x
x
x
Main Charge Unit & Cleaning Blade (MX-607MK)
x
x
x
Replace Black Developer (MX-60GVBA).
x
x
x
x
Replace Black DV toner filter kit (MX-607FK).
Clean LSU Dust Proof Glass (CMYK)
Sim 24-04
Clear Drum CTRG K (Black) Counter.
Clear Main Charger K (Black) Counter.
(MC Cleaner Counter is also cleared automatically)
Clear Drum Blade K (Black) Counter.
Clear Maintenance [ALL] Counter.
x
x
x
Sim 24-05
Clear Developer K (Black) Counter.
x
x
x
Remove ALL toner cartridges, prior to executing Sim 25-02.
x
x
x
Sim 25-02
Toner Concentration Auto Adjustment - Select K.
Note:
If ALL developer is replaced at the same time, select
CMYK. When Sim 25-02 is executed, the Developer
Counter (Sim 24-05) is also cleared automatically.
CMYK. When Sim 25-02 is executed, the Developer
Counter (Sim 24-05) is also cleared automatically.
MAINTENANCE
SHARP
18
MX-30
x
0N
MX-35
x
0N
MX-40
x
0N
MX-5070N
MX-6070N
MX-6070N
IMAGE QUALITY ADJUSTMENTS
(After Replacement Described Above):
(After Replacement Described Above):
Sim 44-02
Image Density & Registration Sensor Adjustment.
Sim 44-06
Process Control execution.
Sim 44-26
Half tone process control execution.
Sim 50-22
Drum Position & Registration Adjustment - select ALL.
Sim 61-13
Clear laser F/R density correction data.
Sim 61-11
Laser F/R density variation correction execution.
Sim 46-74
Automatic Colour Balance Adjustment (Copy & Printer).
Sim 46-01
Adjust Copy Exposure Density (Colour).
Sim 46-02
Adjust Copy Exposure Density (B/W).
SCANNER SECTION:
Clean Platen Glass, Mirrors, CCD, and white reference plate.
Clean RSPF Scanning Glass.
PAPER FEED & TRANSPORT SECTION:
Check/Clean ALL Paper Path Sensors (including Duplex unit).
Check/Clean ALL PF Transport Rollers.
Check/Clean ALL TRAY PF Rollers (check tray counter using
Sim 22-09) – replace every 100k (individual tray) or after 1 year.
Sim 22-09) – replace every 100k (individual tray) or after 1 year.
Sim 24-02
Clear Individual Tray Counter (only after PF roller
replacement)
RSPF:
Check/Clean SPF Pick-Up, Paper Feed & Separation Rollers (check SPF
counter using Sim 22-08) – replace every 100k or after 1 year.
counter using Sim 22-08) – replace every 100k or after 1 year.
Check/Clean SPF Paper Feed Torque Limiter – replace every 800k.
Check/Clean ALL Transport Rollers.
Check/Clean Second Scan Section Scanning Glass.
Check/Clean Lamp Section & Reflector.
MX-30
x
0N
MX-35
x
0N
MX-40x0N
MX-5070N
MX-6070N
MX-6070N
Every
250K
Every
300K
Every
300K
PROCESS SECTION:
In addition to Total / K schedule (or colour schedule if indicated):-
Replace PTC unit:-
x
PTC unit (MX-607CU)
PTC unit (MX-608CU)
Note: MX-607CU cannot be used on MX-5070N/6070N series
Check Waste Toner Container (MX-607HB) & Replace LSU Cleaning
Base.
Base.
Sim 24-04
Clear PTC Counters.
SHARP
MAINTENANCE
19
MX-30
x
0N
MX-35
x
0N
MX-40x0N
MX-5070N
MX-6070N
MX-6070N
Every
250K
Every
300K
Every
300K
FUSING SECTION:
Replace Fusing Belt unit:-
x
Fusing Belt Unit (MX-607FB).
x
x
Fusing Belt Unit (MX-608FB).
Note: MX-607FB cannot be used on MX-5070N/6070N series
Replace Pressure Roller Kit (MX-607LH):-
Pressure Roller
Apply UKOG-0235FCZZ grease to the shaft section of the Pressure
Roller.
Roller.
Check/Clean both Upper and Lower Thermistors.
Sim 24-04
Clear Fusing Belt Counters.
Clear Fusing Roller Counters.
Clear Press Roller Counters.
Clear Separation Pawl Counters.
Clear Separation Plate Counters.
Clear Fusing Unit Counter.
TRANSFER SECTION:
Replace Primary (Image) Transfer Belt Kit (MX-607B1):-
Primary Transfer Belt
Replace Primary Transfer Cleaning Blade Kit (MX-607TL):-
Primary Transfer Blade.
Cleaning Roller
Cleaning Roller
Apply Yellow Toner [CKOG-0345DS51] to Primary Transfer Belt
Replace Secondary Transfer Roller Kit (MX-607B2):-
Secondary Transfer Roller Unit.
Clean ID & Registration Sensors.
Sim 24-04
Clear TC1 Belt Counters.
Clear Trans Blade Counters.
Clear TC1 Belt Unit Counter.
Clear TC2 Roller Counters.
Clear TC2 Roller Unit Counter.
Sim 50-22
Drum Position & Registration Adjustment - select ALL.
Every
300K
Every
300K
Every
300K
FILTER SECTION:
Replace Ozone Filter Kit (MX-607FL):-
Ozone Filter
Sim 24-04
Clear Ozone Filter Counter.
MAINTENANCE
SHARP
20
MX-30
x
0N
MX-35
x
0N
MX-40x0N
MX-5070N
MX-6070N
MX-6070N
Every
300K
Every
300K
Every
300K
INNER FINISHER [MX-FN27]
Clean inlet paper transport rollers.
Clean paper exit paddle.
Clean paper guides and tray.
Check/Replace Staple Unit every 200K staples
[0CW4H560160//]
Check/Replace Staple Less Staple Unit assembly every 20K staples
[0CW4M511130//]
1K FINISHER
[MX-FN28/FN29]:
Clean paper transport rollers.
Clean all sensors.
Check/Replace Staple Unit every 500K staples
[0JEAJ011030//]
Check/Replace Saddle Staple Unit 200K staples
[0JEAJ011031//]
TOOL LIST (required for Maintenance):
Name
Part Code
Note / Comment
Yellow toner starting powder
CKOG-0345DS51
For Primary transfer belt
Conductive grease (FLOIL GE-676) UKOG-0012QSZZ
For shaft(s)
Grease (FLOIL GP-501MR)
UKOG-0013QSZZ
For Paper feed roller shaft(s)
Grease (MOLYKOTE X5-6020)
UKOG-0158FCZZ
For Scanner rails
Grey test chart
UKOG-0162FCZZ
Grease (JFE552)
UKOG-0235FCZZ
For Pressure Roller Shaft
Grease (HANARL FL-955R)
UKOG-0299FCZZ
For Drive Unit Shafts/Gears
Grease (FLOIL G-313S)
UKOG-0307FCZZ
Stearic acid starting powder
UKOG-0312FCZZ
For OPC drum(s).
Colour copy test chart
UKOG-0326FCZZ
Shading adjustment sheet
UKOG-0333FCZZ
For DSPF
Scanner adjustment chart
UKOG-0356FCZZ
SIT Chart
Note: Refer to the MX-3050N/4070N/6070N Service Manual for guidance on grease application/type.
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man2) service manuals if exist.