Sharp MX-2610N / MX-3110N / MX-3610N (serv.man14) Service Manual ▷ View online
MX-3610N MX-KB11 (KEYBOARD) 5 – 3
Fit the flat cable edges with sections A of the Mylar, and
remove slack in sections B of the flat cables.
remove slack in sections B of the flat cables.
When attaching the operation panel unit, insert the mylar tip
into the cover of the operation section.
into the cover of the operation section.
Allow slack around section A of the flat cable.
2)
Attach the operation panel unit.
3)
Attach the operation panel lower cover (For keyboard)
included in the package.
included in the package.
4)
Attach the operation panel cover.
E. External fixture attachment
1)
Attach the operation panel upper cover.
Connect the terminal so that it faces downward between the
arrow marks.
arrow marks.
B
B
A
A
2
2
1
1
2
2
2
1
3
3
1
2
3
3
3
MX-3610N MX-KB11 (KEYBOARD) 5 – 4
2)
Attach the operation panel cover.
3)
Attach the front cabinet upper.
F. Turn ON the power of the main unit
1)
Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
and turn ON the main power switch and the operation panel
power switch.
G. Keyboard input check
1)
Touch [Image send] on the touch panel.
2)
Touch [File name] on the touch panel.
3)
Push the keyboard, and check the input display on the touch
panel.
panel.
H. USB operation check
1)
Insert a USB memory into the USB connector of the operation
panel.
panel.
2)
Check to confirm that the recognition memory of the USB
memory is displayed on the operation panel.
memory is displayed on the operation panel.
2
2
2
1
1
2
2
MX-3610N IC card reader 6 – 1
MX-3610N
Service Manual
[6] IC card reader
1. Preparation
A. Supported IC card readers
B. Necessary parts
There are two kinds of card reader holders.
Choose the suitable one according to the card reader to be
installed.
Choose the suitable one according to the card reader to be
installed.
2. Installation
Before installation, be sure to turn both the operation and main
power switches off and disconnect the power plug from the power
outlet. Make double sure that the data lamp on the operation panel
does not light up or blink when performing installation.
power switches off and disconnect the power plug from the power
outlet. Make double sure that the data lamp on the operation panel
does not light up or blink when performing installation.
A. External fixture removal
1)
Remove the front cabinet upper.
2)
Remove the operation panel cover.
3)
Remove the operation panel upper cover.
No.
Type of card readers
Manufacturer
Model Name
1
Non-contact IC card
reader
reader
RFIDeas
RDR-6081AKU
2
Equitrac
Y591-EHID-201 v01
3
Elatec
TWN3
4
RFIDeas
RDR-7582AKU
No.
Parts code
Parts name
Price rank
Q’ty
1
LHLDZ2230FCZZ
IC Card reader holder B
AX
1
2
LHLDZ2231FCZZ
IC card reader holder C
AX
1
3
PTPE-0352FCZZ
Card reader fixing tape
(Double-stick tape)
(Double-stick tape)
AP
2
4
DHAI-4709FCPZ
USB mini harness-AR
BP
1
5
LBNDJ0013FCZ1
Binding band
AE
2
6
XEBS730P08000
Screw (M3 x 8 P tight)
AC
3
Parts code
Parts name
Supported IC card
LHLDZ2230FCZZ
IC card reader holder B
Y591-EHID-201 v01
LHLDZ2231FCZZ
IC card reader holder C
RDR-6081AKU, TWN3,
RDR-7582AKU
RDR-7582AKU
1
2
3
4
1
2
3
4
5
6
2
1
1
1
1
1
2
3
2
1
1
1
MX-3610N IC card reader 6 – 2
B. Attachment to the IC card reader holder
1)
Attach the card reader fixing tape to the IC card reader holder
referring to the notches as the reference.
referring to the notches as the reference.
The holder type and the attachment procedure differ depend-
ing on the kind of the IC card reader.
ing on the kind of the IC card reader.
Holder type B
Y591-EHID-201 v01
Y591-EHID-201 v01
Vertical and horizontal directions: Fit with the notches.
Holder type C
RDR-6081AKU, TWN3, RDR-7582AKU
Holder type C
RDR-6081AKU, TWN3, RDR-7582AKU
Vertical direction: Fit with the notch.
Horizontal direction: Fit with the notch and the lower edge.
Horizontal direction: Fit with the notch and the lower edge.
2)
Cut out the boss.
The cutting position of the boss of the IC card reader holder
differs depending on the kind of the IC card reader.
differs depending on the kind of the IC card reader.
Holder type C
RDR-6081AKU, RDR-7582AKU
RDR-6081AKU, RDR-7582AKU
Holder type C
TWN3
TWN3
3)
Attach the IC card reader to the IC card reader holder accord-
ing to the attachment reference ribs.
ing to the attachment reference ribs.
The attachment reference position differs depending on the
kind of the IC card reader.
kind of the IC card reader.
Holder type B
Y591-EHID-201 v01
(No reference position)
Y591-EHID-201 v01
(No reference position)
Click on the first or last page to see other MX-2610N / MX-3110N / MX-3610N (serv.man14) service manuals if exist.