DOWNLOAD Sharp MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man104) Service Manual ↓ Size: 993.59 KB | Pages: 8 in PDF or view online for FREE

MX-3100N  MX-2600N/3100N, MX-2600G/3100G  1 – 13

1)

Enter the SIM50-28 mode.

2)

Select [OC ADJ] with the key button.

3)

Select the paper feed tray with paper in it with the key button.
(Any paper size will do.)

4)

Press [EXECUTE] key.

The color patch image (adjustment pattern) is printed out.

5)

Set the adjustment pattern on the document table.
(Any direction)

NOTE: Fit the adjustment pattern correctly with the document

guide.

6)

Press [EXECUTE] key.

The following item is automatically adjustment.

* Copy lead edge image reference position adjustment, image

off-center, sub scanning direction image magnification ratio
automatic adjustment

7)

Press [OK] key.

The adjustment result becomes valid.

1)

Enter the SIM50-28 mode.

2)

Press the [SPF ADJ] button.

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

$872,0$*(326,7,21$'-8670(176(59,&(

2&ǂ$'-

%.0$*ǂ$'-

63)ǂ$'-

6(78335,17ǂ$'-

5(68/7

'$7$

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

$872,0$*(326,7,21$'-8670(176(59,&(

(;(&87(

0)7

&6

&6

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

$872,0$*(326,7,21$'-8670(176(59,&(

3/($6(:$,7

12:(;(&87,1*

(;(&87(

5(35,17

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

$872,0$*(326,7,21$'-8670(176(59,&(

6,08/$7,21&203/(7(

3/($6(386+&$.(<

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

$872,0$*(326,7,21$'-8670(176(59,&(

2&ǂ$'-

%.0$*ǂ$'-

63)ǂ$'-

6(78335,17ǂ$'-

5(68/7

'$7$

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

$872,0$*(326,7,21$'-8670(176(59,&(

6,'(

6,'(

$//

: '08 Oct 15

MX-3100N  MX-2600N/3100N, MX-2600G/3100G  1 – 14

3)

Select [ALL] key.

4)

Select one of the paper feed trays that can be used to print
RSPF adjustment patterns. (Multiple selection is not allowed.)

5)

Press the [EXECUTE] button, and the machine starts self-print
of SPF adjustment patterns.

* The screen shows a message indicating that the machine is

self-printing SPF adjustment patterns.

When self-print finishes, the next screen appears where you
can start SPF adjustments.

6)

Set up the RSPF adjustment patterns on the RSPF with pat-
tern side up.

* By pressing the [REPRINT] button, you can return to the

cassette selection screen and have the machine self-print
RSPF adjustment patterns again.

7)

Press the [EXECUTE] button, and the machine starts reading
SPF adjustment patterns (for the front side).

* The machine starts calculating the adjustment amount (for

the front side) after it has read the patterns for the front side.

After the machine has finished calculating the adjustment
amount for the front side, the next screen appears where
you can have the machine start reading SPF adjustment
patterns (for the back side).

8)

Set up the RSPF adjustment patterns on the RSPF with blank
side up.

* By pressing the [REPRINT] button, you can return to the

cassette selection screen and have the machine self-print
SPF adjustment patterns again.

9)

Press the [EXECUTE] button. The machine starts scanning
RSPF adjustment patterns (for the back side).

The adjustment result screen appears.

10) press the [OK] button. The adjustment values are saved into

EEPROM and RAM and return to the top menu.

* To return to the result screen, press the [BACK] button.

• Be sure to use the specified paper for color.

1)

Enter the SIM46-74 mode.

2)

Press [EXECUTE] key.

The high density process control is performed, and the copy
color patch image (adjustment pattern) is printed out. (A3 or
11" x 17" paper is automatically selected.)

3)

Set the color patch image (adjustment pattern) paper printed in
procedure 2) on the document table.

Set the color patch image (adjustment pattern) printed in the
procedure 2) on the document table. Place the color patch
image so that the fine lines are on the left side. At that time,
place 5 sheets of white paper on the printed color patch image
(adjustment pattern).

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

(1*,1($872$'-8670(176(59,&(

(;(&87(

35(66>(;(&87(@72352&21(;(&87,21$1'35,177+(7(673$7&+

3/($6(86(63(&,),('7<3(2)$25h6,=(3$3(5

)257+,6$'-8670(17

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

(1*,1($872$'-8670(176(59,&(

(;(&87(

352&21(;(&87,1*

: '08 Oct 15

MX-3100N  MX-KBX1  10 – 3

2)

Open the front cabinet, and remove the screw, and remove the
front cabinet upper.

3)

Remove the screw, and remove the operation base plate unit.

4)

Remove the screws and disconnect two connectors. Place the
operation panel upside down on the protection sheet. 

*1: Don't pull the lead wire. The connector can be locked.

Hold the housing section of connector, pull out it.

*2: Slowly pull the lead wire and disconnect the connector.

*3: There is a locking section on the reverse side. Use care for 

that.

5)

Remove the screw, and remove the panel angle.

6)

Install the keyboard unit (part No.1 in the package), and fix it
with the fixing screw A (part No.5 in the package) and the fixing
screw B (part No.6 in the package).  

* When fixing the fixing screw B, use the short screwdriver or

the small screwdriver.

1)

Check that each harness is engaged with the rib.

*1 *3

*2

: '08 Oct 15

MX-3100N  MX-KBX1  10 – 4

2)

Connect the connector.

3)

Install the operation panel to the main unit, and fix it with the
screw.

*1: Be careful to the place of the connector lock, it is on the 

other side.

*2: Insert the connector all the way.

4)

Remove the screw, and remove the operation base plate B
from the operation base plate unit.

5)

Slide and attach the operation base plate C (part No.2 in the
package) to the operation base plate unit.

6)

Install the operation base plate unit to the main unit, and fix it
with the screws.

7)

Attach the front cabinet upper, and fix it with the screws.

1)

When the cabinet position of the key top unit is shifted, loosen
the screws which are fixing the key top unit and adjust the
position up and down. Then tighten the screws.

1)

Insert the power plug of the main unit into the power outlet.

2)

Turn ON the power switch inside the front cabinet.

*1

*2

: '08 Oct 15