Sharp DX-C200P Service Manual ▷ View online
[5]Replacement and Adjustment
5-40
When Reassembling the Fusing Unit
Route the harness [A] as shown above when reinstalling the back cover [B].
Transport/Fusing Motor
1 Rear cover (
p. 5-5)
2. Left cover (
p. 5-7)
3. Disconnect the fusing connector [A] (
p. 5-35, hooks x 2).
[5]Replacement and Adjustment
5-41
4. Pull out the connector [B] downward and remove it.
5. Fusing harness guide [C] (
x 2)
6. Duplex timing belt [D]
7. Transport/Fusing motor assembly [E] (
x 3,
x 3,
x 1, grounding plate [F] x 1)
[5]Replacement and Adjustment
5-42
8. Transport/Fusing motor [G] (
x 3)
[5]Replacement and Adjustment
5-43
Paper Feed
Paper Feed Clutch
1 Rear cover (
p. 5-5)
2. Left cover (
p. 5-7)
3. Disconnect the fusing relay harness [A] (hook).
4. Paper feed clutch [B] ( x 1,
x 1)
Paper Feed Roller
1 Remove all the AIO cartridges.
2. Remove the waste toner bottle.
3. Rear cover (
p. 5-5)
4. Left cover (
p. 5-7)
5. Paper feed clutch (
p. 5-43)
6. Close the top cover and front cover.
7. Pull out the tray.
Click on the first or last page to see other DX-C200P service manuals if exist.