Sharp DM-2000 (serv.man13) User Manual / Operation Manual ▷ View online
67
OPTIONAL EQUIPMENT
Margin shift
The MARGIN SHIFT feature automatically shifts the text or image to the
right to increase the left margin by approxomately 9 mm.
right to increase the left margin by approxomately 9 mm.
●
This feature cannot be used with the 2 in 1 or 4 in 1 feature.
1
Place the original on the original table and close the
platen cover.
platen cover.
●
If an optional single pass feeder (SPF) is installed, it can also be used
for this feature. Set the originals so that the margin side is positioned
at the left side.
for this feature. Set the originals so that the margin side is positioned
at the left side.
2
Press the MARGIN SHIFT key.
3
Ensure that the desired copy paper size is selected.
4
Set the number of copies and press the START key.
ELECTRONIC SORTING KIT (AR-EB3)
Expanded margin
Copy
Original
Margin is
expanded here.
expanded here.
Electronic sorting kit (AR-EB3)
68
OPTIONAL EQUIPMENT
Loading copy paper
250-SHEET PAPER FEED UNIT (AR-DE5)
2x250-SHEET PAPER FEED UNIT (AR-DE6)
2x250-SHEET PAPER FEED UNIT (AR-DE6)
These paper feed units provide the convenience of increased paper capacity
for the copier and a greater choice of paper sizes readily available for
copying.
The AR-DE5 contains one 250-sheet paper tray and the AR-DE6 contains
two 250-sheet paper trays.
for the copier and a greater choice of paper sizes readily available for
copying.
The AR-DE5 contains one 250-sheet paper tray and the AR-DE6 contains
two 250-sheet paper trays.
PART NAMES
250-sheet paper feed unit (AR-DE5)
2x250-sheet paper feed unit (AR-DE6)
Trays
Side cover
Side cover
Tray
AR-DE5
AR-DE6
The method of loading copy paper for the paper trays of these paper feed
units is the same as for the paper trays in the copier. See page 10.
The method of changing the copy paper size is also the same for the paper
trays in the copier. See page 11.
units is the same as for the paper trays in the copier. See page 10.
The method of changing the copy paper size is also the same for the paper
trays in the copier. See page 11.
69
OPTIONAL EQUIPMENT
250-SHEET PAPER FEED UNIT (AR-DE5)/2x250-SHEET PAPER FEED UNIT (AR-DE6)
250-sheet paper feed unit (AR-DE5)
2x250-sheet paper feed unit (AR-DE6)
Misfeed removal
The copier will stop when a misfeed occurs. The misfeed (
) indicator and
the red indicator which indicates the paper feed unit will blink.
1
Open the side cover of the paper feed unit and remove
the misfed paper.
the misfed paper.
●
Be sure to perform this step before pulling out the paper trays. If not,
the paper may be torn as the trays are opened.
the paper may be torn as the trays are opened.
2
Gently lift and pull out the paper tray which was in use.
Remove any misfed paper.
Remove any misfed paper.
3
Close the paper tray and the side cover.
●
Confirm that the misfeed (
) indicator has gone out.
70
OPTIONAL EQUIPMENT
250-SHEET PAPER FEED UNIT (AR-DE5)/2x250-SHEET PAPER FEED UNIT (AR-DE6)
250-sheet paper feed unit (AR-DE5)
2x250-sheet paper feed unit (AR-DE6)
AR-DE5
AR-DE6
As a part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
Specifications
Copy paper size
A4 to A3
Paper weight
56 to 80 g/m
2
Paper capacity
One paper tray with capacity for 250 sheets of paper
Weight
Approx. 4.7 kg
Dimensions
590 mm (W) x 471 mm (D) x 88 mm (H)
Power supply
Drawn from the copier
Copy paper size
A4 to A3
Paper weight
56 to 80 g/m
2
Paper capacity
Two paper trays with capacity for 250 sheets of paper
each
each
Weight
Approx. 9.1 kg
Dimensions
590 mm (W) x 471 mm (D) x 173.5 mm (H)
Power supply
Drawn from the copier
Click on the first or last page to see other DM-2000 (serv.man13) service manuals if exist.