DOWNLOAD Sharp DM-2000 (serv.man13) Service Manual ↓ Size: 487.6 KB | Pages: 28 in PDF or view online for FREE

Model
DM-2000 (serv.man13)
Pages
28
Size
487.6 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Copying Equipment / DM2000-Operation Manual Part4
File
dm-2000-sm13.pdf
Date

Sharp DM-2000 (serv.man13) User Manual / Operation Manual ▷ View online

63
OPTIONAL EQUIPMENT
4 in 1 copying
2 in 1 copying
Pattern
Pattern
Pattern
Pattern
Pattern
Pattern
Pattern
Pattern
The 2 in 1 or 4 in 1 feature is used to copy 2 or 4 originals, collectively in a
specified order, onto one sheet.
To use these features, an optional single pass feeder (AR-SP2) is needed.
These features cannot be used with the dual page copying, XY zoom,
erase, or margin shift features.
Copies can be made with or without the border lines shown in the
illustration. See USER PROGRAMS on page 37.
The order of originals which will be arranged on the copies can be selected
by user programs. There are two patterns of layout for 2 in 1 copying and
four patterns of layout for 4 in 1 copying. See page 37.
The 2 in 1 or 4 in 1 feature operates only in the sort or group mode. If the
2 in 1 or 4 in 1 feature is selected when either the sort or group mode has
not been selected, the group mode will be automatically selected.
2 in 1 or 4 in 1
1
Set the originals face up in the document feeder tray.
The original table cannot be used for the 2 in 1 or 4 in 1 feature.
2
Use the TRAY SELECT key to select the paper tray with
the desired paper size.
The bypass tray and any tray with non-standard size paper cannot be
used with the 2 in 1 or 4 in 1 feature.
3
To confirm or set the layout pattern for 2 in 1 copying,
first ensure that both the 2 IN 1 and 4 IN 1 indicators are
not lit then press and hold the 2 IN 1 / 4 IN 1 key for more
than 5 seconds.
The 2 IN 1 indicator will blink and the currently selected layout pattern
number will blink in the copy quantity display.
To confirm or set the layout pattern for 4 in 1 copying,
use the 2 IN 1 /  4 IN 1 key to light the 2 IN 1 indicator then
press and hold the 2 IN 1 / 4 IN 1 key for more than 5
seconds.
The 4 IN 1 indicator will blink and the currently selected layout pattern
number will blink in the copy quantity display.
ELECTRONIC SORTING KIT (AR-EB3)
Electronic sorting kit (AR-EB3)
64
OPTIONAL EQUIPMENT
ELECTRONIC SORTING KIT (AR-EB3)
Electronic sorting kit (AR-EB3)
4
Enter the desired pattern number using a numeric key.
The entered number will blink in the copy quantity display. For layout
pattern numbers, see the previous page.
5
Press the START key.
The entered number will light up steadily.
6
Press the 2 IN 1 / 4 IN 1 key to complete the selection.
The copy ratio will be calculated automatically. If the calculated copy
ratio is less than 50%, part of original image may not be copied because
the smallest copy ratio is 50%.
7
Set the number of copies.
8
Press the START key.
Copying will start after the originals have been scanned. Up to 30
sheets of A4 originals can be scanned. (If originals are fed continuously
using the stream feeding mode, up to approximately 60 sheets of A4
originals can be scanned. However, if photographs are copied, the
number of originals which can be scanned is less.) When the memory
becomes full of scanned original image data, the ORIGINAL DATA
indicator will blink.
When the ORIGINAL DATA indicator blinks, the copier will stop
scanning. To start copying of scanned originals, press the START key.
To cancel copying, press the CLEAR or CLEAR ALL key.
65
OPTIONAL EQUIPMENT
Erase
This copier has an edge erase mode and a centre erase mode.
Edge erase can be used to eliminate shadow lines around the edges of
copies caused when thick paper or a book is used as an original.
Centre erase can be used to eliminate the shadow produced by the bindings
of bound documents.
Edge + centre erase can be used to eliminate shadow lines around the edges
of copies and to eliminate the shadow at the centre of copies.
The erase width can be set from  0 to 20 mm in five steps using user
program No. 16. See page 37.
This feature cannot be used with the 2 in 1 or 4 in 1 feature.
1
Place the original on the original table and close the
platen cover.
If an optional single pass feeder (SPF) is installed, it can also be used
for this feature.
2
Press the ERASE key to select the desired erase mode.
To select the EDGE + CENTRE ERASE mode, press the ERASE key
until both the EDGE and CENTRE indicators light up.
3
Ensure that the desired copy paper size is selected.
If non-standard size paper or the bypass tray is used, the paper will be
regarded as A3 size paper and the erase area will not be proper if the
paper size is not A3.
ELECTRONIC SORTING KIT (AR-EB3)
A B
A B
A
A
A B
A B
Centre erase
Edge + Centre erase
Edge erase
Electronic sorting kit (AR-EB3)
66
OPTIONAL EQUIPMENT
4
Set the number of copies.
5
Press the START key.
ELECTRONIC SORTING KIT (AR-EB3)
Electronic sorting kit (AR-EB3)
Page of 28
Display

Click on the first or last page to see other DM-2000 (serv.man13) service manuals if exist.