Sharp DM-1500 (serv.man2) Service Manual ▷ View online
[3] CONSUMABLE PARTS
1. Supply system table
A. USA, CANADA
No.
Name
Content
Life
Product name
Package
Remark
1
Developer cartridge
(Black)
<With IC>
(Black)
<With IC>
Toner/developer cartridge
(Toner: 220g, Developer: 190g)
(Toner: 220g, Developer: 190g)
× 1
6K
DM-150TD
5
Life setup is based on
A4 5% documents.
For 6% coverage, 5K
life.
A4 5% documents.
For 6% coverage, 5K
life.
IC chip
× 1
Warranty Card
× 1
Postcard label
× 1
Returned Operation Manual
× 1
Polyethene bag
× 1
2
Drum cartridge
Drum cartridge
× 1 18K
DM-150DR
5
Warranty Card
× 1
2. Environmental
The environmental conditions for assuring the copy quality and the
machine operations are as follows:
machine operations are as follows:
(1) Normal operating condition
Temperature:20˚C~25
Humidity:65
Humidity:65
± 5%RH
(2) Acceptable operating condition
(3) Optical condition
(4) Supply storage condition
3. Production control number(lot No.)
identification
〈Developing cartridge〉
∗:Destination
Division
No.
EX Destination
A same pack
G
B same pack
H
Option Destination
A
P
B
Q
Humidity (RH)
85%
60%
20%
10˚C
30˚C
35˚C
Humidity (RH)
90%
60%
15%
–25˚C
30˚C
40˚C
Humidity (RH)
90%
20%
–5˚C
45˚C
Production month
Production day
Destination code
(Dealer, distributor, OEM, etc.)
Production place
(SOCC: Fixed to B.)
End digit of year
Version No.
DM-1505
3 – 1
〈Drum cartridge〉
The label on the drum cartridge shows the date of production.
(SOCC production)
(SOCC production)
〈JAPAN production〉
Division
No.
Ex production
1
Option
2
Same pack
3
∗1 The production control label is not attached to the cartridge of a
China product.
Production month
Production day
Destination code
(Dealer, distributor, OEM, etc.)
Production place
(SOCC: Fixed to B.)
End digit of year
Version No.
X
0001
1
9
Ver.A
1
Production month
(1 - 9 = Jan. - Sep. 0 = Oct. X = Nov. Y = Dec.)
Serial number of month
Fixed to 1.
Pack division
(See table below)
End digit of year
Version No.
Production control
label attachment position
label attachment position
Production control
label attachment position(*1)
label attachment position(*1)
DM-1505
3 – 2
4. Memory Device
A. Function
The memory device is used to monitor the life of the developer cartridge in the way that the machine reads and writes information (e.g.page count)
to the memory device equipped in the developer cartridge.
When the life is reached, the memory device becomes nonfunctional to prevent the deterioration of image/text quality and machine damages.
Therefore, unnecessary service costs would be saved.
to the memory device equipped in the developer cartridge.
When the life is reached, the memory device becomes nonfunctional to prevent the deterioration of image/text quality and machine damages.
Therefore, unnecessary service costs would be saved.
B. Flowchart
C. Display timing of DM-1500/1505 maintenance lamps, toner lamp and error codes
Remaining print quantity
≥ 8K
Remaining print quantity
< 8K
Remaining print quantity
= 0
Maintenance
lamp
Toner lamp
Error code
Maintenance
lamp
Toner lamp
Error code
Toner lamp
Error code
During
maintenance
period
maintenance
period
Start
OFF
OFF
–
OFF
OFF
–
OFF
–
Toner Near
OFF
ON
–
OFF
ON
–
ON
–
Toner End
OFF
BLINK
–
OFF
BLINK
F2
BLINK
F2
After
maintenance
period
maintenance
period
Start
ON
OFF
–
ON
OFF
–
OFF
–
Toner Near
ON
ON
–
ON
ON
–
ON
–
Toner End
ON
BLINK
–
ON
BLINK
F2
BLINK
F2
Note: When the memory device is faulty, “U2” will be displayed.
Is 8K print reached ?
Is toner empty
detected ?
detected ?
End of life
Copying
Yes
Yes
No
No
Conditions for end of life
(1) Copy/print volume = 8K.
(2) Toner empty is detected.
(1) Copy/print volume = 8K.
(2) Toner empty is detected.
Handshake
New developer cartridge
Installed to the machine
Machine
DM-1505
3 – 3
5. Consumable parts refill procedure
[External view check points]
Check for breakage of the four pins (*) and the ATC sensor connector
of the DV BOX unit.
Check for breakage of the four pins (*) and the ATC sensor connector
of the DV BOX unit.
Check for breakage of molt and suede.
(For reattachment, refer to the reattachment procedure.)
(For reattachment, refer to the reattachment procedure.)
A. TD cartridge
1) Remove the waste toner box unit
2) Remove the DVF cover unit.
•
When removing, be careful not to break the two pins.
3) Remove the THBOX unit.
4) Remove the DV blade.
•
Remove excessive glue.
•
Remove together with the base PET.
*Pins
*Pins
ATC sensor
connector
connector
DV molt F
DV molt
DV molt R
Side sheet F
Side sheet R
DM-1505
3 – 4
Click on the first or last page to see other DM-1500 (serv.man2) service manuals if exist.