DOWNLOAD Sharp AR-PG1 (serv.man4) Service Manual ↓ Size: 181.66 KB | Pages: 31 in PDF or view online for FREE

3

Printer trouble?

Select File from the list of options in the Ports window, and then click the OK button.

Select the new printer you would like to use from the list in the Installed Printers
window, and then click the Connect button.

Select the printer port to use for the new printer, and then click the OK button.

Click the Set As Default Printer button, and then click the Close button.

To use the AR-150 series again, perform the same procedure but select the
port to be used (for example, LPT1) in step 4.

If the printer driver is not installed properly or if you need not use this printer any more, uninstall
the printer driver from your computer using the following procedure.

If using Windows 95/Windows 98/Windows NT 4.0, click Start, Program, SHARP
AR-150 Series, and Uninstall AR-150 Series.
If using Windows 3.1x, double-click the SHARP AR-150 Series icon in Program
Manager and double-click the Uninstall AR-150 Series icon.

When the “Confirm File Deletion” window appears, Click the Yes button.

When the “Remove Programs From Your Computer” window appears, click the OK
button.

4

Appendix

4

Resolution

600 or 300 can be selected.

Page description language

SHARP GDI (Parallel)
SHARP GDI, USB (USB)

Page orientation

Portrait or landscape

First print time

Approx. 9.6 seconds*

Print speed (multiple pages)

Approx. 8 pages per minute (letter or A4) (Parallel)
Approx. 6 pages per minute (letter or A4) (USB)

Interface port

Bi-directional parallel interface
(IEEE 1284 compliant) 2 m (6 feet) Max.
USB (B-type) interface (twisted pair cable)
2 m (6 feet) Max.

* First print time may differ depending on operating conditions, such as power-supply voltage

and room temperature.
Also the time may differ depending on data quantity to be printed and applications.

As a part of our policy of continuous improvement, SHARP reserves the right
to make design and specification changes for product improvement without
prior notice. The performance specification figures indicated are nominal values
of production units. There may be some deviations from these values in
individual units.

4

Appendix

This printer uses a bi-directional parallel interface.

For specifications of the parallel interface of your computer, see its operation
manual.

Connector
36-pin DDK 57LE-40360-730B (D29)
female connector or equivalent connector

Cable
Shielded type bi-directional parallel
interface
For best results, use a printer interface cable
which is IEEE1284 compliant. (2 m (6 feet)
Max.)

Pin configuration
The pin numbers and signal names are
listed in the following table.

1

18

36

19

Pin No.

Signal name

Pin No.

Signal name

1

STB

19

GND (STB RET)

2

DATA1

20

GND (DATA1 RET)

3

DATA2

21

GND (DATA2 RET)

4

DATA3

22

GND (DATA3 RET)

5

DATA4

23

GND (DATA4 RET)

6

DATA5

24

GND (DATA5 RET)

7

DATA6

25

GND (DATA6 RET)

8

DATA7

26

GND (DATA7 RET)

9

DATA8

27

GND (DATA8 RET)

10

ACKNLG

28

GND (ACKNLG RET)

11

BUSY

29

GND (BUSY RET)

12

PE (Paper End)

30

GND (PE RET)

13

SLTC

31

INPRM

14

AUTO LF

32

FAULT

15

(NC)

33

(NC)

16

GND (0 V)

34

(NC)

17

FG

35

+5V

18

+5V

36

SLTC IN

4

Appendix

Connector
4-pin DDK DUSB-BRA42-T11
Type-B connector

Cable
Shielded twisted pair cable
(2 m (6 feet) Max.: high-speed transmission equivalent)

Pin configuration
The pin numbers and signal names are listed  in the
following table.

Pin No.

Signal name

1

+5V

2

- DATA

3

+DATA

4

GND

1

2

3

4