Sharp AR-PE3 (serv.man12) User Manual / Operation Manual ▷ View online
5
5-1
Accessing Setup
After you perform initial Setup (Server, Network, and Printer Setup) from the Control
Panel, you can change most Setup options from a Windows computer.
Panel, you can change most Setup options from a Windows computer.
Accessing Setup
In addition to using the Control Panel, you can set up the Fiery X3e remotely. You can
perform remote Setup from a Windows computer using Command WorkStation.
perform remote Setup from a Windows computer using Command WorkStation.
To use the Setup applications (Command WorkStation), you must enter the Fiery X3e
Administrator password. This is set either from the local Setup at the Control Panel, or
remote Setup from Command WorkStation.
Administrator password. This is set either from the local Setup at the Control Panel, or
remote Setup from Command WorkStation.
Remote Fiery Setup
Remote Setup is performed from a Windows computer using Command WorkStation.
T
O
ACCESS
W
EB
S
ETUP
1.
Start your Internet browser and enter the IP address of the Fiery X3e.
2.
Click the Fiery WebTools icon in the lower-left corner of the window.
3.
Log in as Administrator.
4.
When the Fiery X3e home page appears, click WebSetup.
Chapter 5:
Setting up
the Fiery X3e
from a Windows
Computer
Setting up
the Fiery X3e
from a Windows
Computer
5
5-2
Setting up the Fiery X3e from a Windows Computer
T
O
ACCESS
S
ETUP
FROM
C
OMMAND
W
ORK
S
TATION
1.
Start Command WorkStation.
2.
Log on as Administrator.
3.
Choose Setup from the Server menu.
Regardless of how you access Setup remotely, the following dialog box appears.
N
OTE
:
The interface of remote Setup from Command WorkStation and WebSetup
is identical. The Setup illustrations in this chapter are displayed from
Command WorkStation.
Command WorkStation.
5
5-3
General Setup options
General Setup options
You can specify Fiery X3e system settings that affect all users, such as the name of the
Fiery X3e, system date and time, passwords, and Job Log printing.
Fiery X3e, system date and time, passwords, and Job Log printing.
Server Name
—Specify a name for the Fiery X3e. This is the name that appears in the
Chooser on an AppleTalk network.
N
OTE
:
Do not use the device name (
AR-C330
) as the server name. If you have more
than one Fiery X3e, do not assign them the same name.
Date and Time
—Specify the system date and time, which are recorded on the Job Log.
Enable Printed Queue
—Specify whether to enable the Printed queue, a storage location
on the Fiery X3e hard disk drive for recently printed jobs. You can reprint jobs from
the Printed queue without resending them to the Fiery X3e. If the Printed queue is
not enabled, jobs are deleted from the Fiery X3e hard disk immediately after they
are printed.
the Printed queue without resending them to the Fiery X3e. If the Printed queue is
not enabled, jobs are deleted from the Fiery X3e hard disk immediately after they
are printed.
5
5-4
Setting up the Fiery X3e from a Windows Computer
Jobs Saved in Printed Queue
—Specify the number of jobs to be stored in the Printed
queue. Jobs in the Printed queue take up space on the Fiery X3e hard disk drive.
Delete Scan Jobs
—Specify how often to delete scan jobs from the Fiery X3e hard disk
drive. Choose Manually to delete scan jobs manually on a job-by-job basis. Click
Delete Scan Jobs Now to delete all scan jobs immediately.
Delete Scan Jobs Now to delete all scan jobs immediately.
Use Character Set
—Specify whether the Control Panel and the job management tools
should use the Macintosh, DOS, or Windows character set for displaying file names.
This is important if a file name includes accented or composite characters (such as é
or æ). For mixed-platform networks, select the setting that gives the best overall
representation of the special characters you use.
This is important if a file name includes accented or composite characters (such as é
or æ). For mixed-platform networks, select the setting that gives the best overall
representation of the special characters you use.
Enable Preview
—Specify whether a preview thumbnail should be displayed in the
Command WorkStation and Command WorkStation LE when a job is being
processed. If you select Yes, the preview thumbnail is displayed in the Processing
section of the Activity Monitor.
processed. If you select Yes, the preview thumbnail is displayed in the Processing
section of the Activity Monitor.
Enable Printing Groups
—Specify whether to enable printer groups for Member
Printing. If you enable this option, you must use Command WorkStation to define
user groups and passwords. Users must then enter their group name into the Group
Name option and their password into the Group Password option to print.
user groups and passwords. Users must then enter their group name into the Group
Name option and their password into the Group Password option to print.
Support
—Enter names, phone numbers, and e-mail addresses of contact people at
your organization who provide support for the Fiery X3e and the copier/printer.
Available from the Support tab.
Available from the Support tab.
Click on the first or last page to see other AR-PE3 (serv.man12) service manuals if exist.