Sharp AR-PE3 (serv.man12) User Manual / Operation Manual ▷ View online
4
4-37
Network Setup options
SNMP Setup
SNMP Read Community Name
[public]
[public]
This option appears if you select Yes for Enable SNMP.
This option allows you to change the SNMP Community Name (“public” by default)
for read access. Once it is changed, the new community name must be entered to read
any information through remote Setup. Up to 32 ASCII characters including spaces
can be used for the community name.
for read access. Once it is changed, the new community name must be entered to read
any information through remote Setup. Up to 32 ASCII characters including spaces
can be used for the community name.
SNMP Write Community Name
[public]
[public]
This option appears if you select Yes for Enable SNMP.
This option allows you to change the SNMP Community Name (“public” by default)
for write access. Once it is changed, the new community name must be entered to
write any information through remote Setup. Up to 32 ASCII characters including
spaces can be used for the community name.
for write access. Once it is changed, the new community name must be entered to
write any information through remote Setup. Up to 32 ASCII characters including
spaces can be used for the community name.
Network Setup
Service Setup
SNMP Setup
Enable SNMP
Yes/No [Yes]
Yes/No [Yes]
This option enables the SNMP communication over a TCP/IP or IPX connection.
Selecting No disables any access to remote Setup through Fiery WebSetup and
Command WorkStation.
Selecting No disables any access to remote Setup through Fiery WebSetup and
Command WorkStation.
4
4-38
Performing Setup from the Control Panel
N
OTE
:
For the two options above, a space at the beginning or end of the name is
automatically deleted from the name entered. When an invalid character is entered or
no name is specified, the default “public” is used for the community name. A name
consisting only of spaces is invalid.
no name is specified, the default “public” is used for the community name. A name
consisting only of spaces is invalid.
Save Changes
Yes/No [Yes]
Yes/No [Yes]
Select Yes to activate any changes made in Network Setup; select No to return to the
main Setup menu without making any changes.
main Setup menu without making any changes.
Printer Setup options
Printer Setup configures the connections and printing behavior associated with a
particular printing device. For more information about Fiery X3e print connections,
see
particular printing device. For more information about Fiery X3e print connections,
see
page 3-1
.
T
O
ACCESS
PRINTER
SETUP
OPTIONS
In the following list of options, default values, where applicable, appear in brackets.
N
OTE
:
For users to use the Fiery utilities and WebTools or print to the Fiery X3e over a
TCP/IP network, you must publish at least the Hold queue or the Print queue.
Network Setup
Service Setup
Exit Service Setup
This returns you to the main Network Setup menu. Choose Exit Network Setup.
1.
In the main Setup menu, choose Printer Setup.
2.
Enter the options appropriate to the printing requirements at the site.
3.
When you have finished, save changes.
4
4-39
Printer Setup options
Publish Direct Connection
Yes/No [Yes]
Yes/No [Yes]
This option allows users to print (or download) jobs to the Fiery X3e without
spooling. Jobs printed to the Direct connection are not saved in the Printed queue.
spooling. Jobs printed to the Direct connection are not saved in the Printed queue.
If you plan to download fonts to the Fiery X3e, you must publish the
Direct
Direct
connection.
Publish Print Queue
Yes/No [Yes]
Yes/No [Yes]
This option allows users to print (or download) jobs to the Print queue. Jobs that are
printed to the Print queue are spooled to the Fiery X3e disk and printed on a first-in,
first-out basis. Only queues published in the Printer Setup are available to users.
printed to the Print queue are spooled to the Fiery X3e disk and printed on a first-in,
first-out basis. Only queues published in the Printer Setup are available to users.
Publish Hold Queue
Yes/No [Yes]
Yes/No [Yes]
Use this option to allow users to print (or download) jobs to the Hold queue. Jobs in
the Hold queue can only be printed by copying or moving the jobs to the Print queue
with the job management tools.
the Hold queue can only be printed by copying or moving the jobs to the Print queue
with the job management tools.
Personality
Auto/PCL/PostScript [Auto]
Auto/PCL/PostScript [Auto]
This option allows the administrator to set the personality of the copier/printer. If set
to Auto, PDL type of incoming jobs are automatically detected and sent to the
appropriate interpreter.
to Auto, PDL type of incoming jobs are automatically detected and sent to the
appropriate interpreter.
If set to PS, incoming jobs are initially sent to the PS interpreter. If the job type is not
PS, the job is sent to the other interpreter.
PS, the job is sent to the other interpreter.
If set to PCL, incoming jobs are initially sent to the PCL interpreter. If the job type is
not PCL, the job is sent to the other interpreter.
not PCL, the job is sent to the other interpreter.
Save Changes
Yes/No [Yes]
Yes/No [Yes]
Select Yes to activate any changes made in the Printer Setup; select No to return to the
main Setup menu without making any changes.
main Setup menu without making any changes.
4
4-40
Performing Setup from the Control Panel
PostScript Setup options
PS (PostScript) Setup allows you to set defaults for the Fiery X3e. Users can override
most of these defaults on a job-by-job basis. However, users printing from UNIX or
DOS command lines cannot override defaults from their applications. Therefore, you
must set defaults in PostScript Setup. For information about these defaults, see the
most of these defaults on a job-by-job basis. However, users printing from UNIX or
DOS command lines cannot override defaults from their applications. Therefore, you
must set defaults in PostScript Setup. For information about these defaults, see the
Printing Guide
.
T
O
ACCESS
P
OST
S
CRIPT
S
ETUP
OPTIONS
In the list of options that follows, default values, where applicable, appear in
square
square
brackets.
Convert Paper Sizes
No Letter/Tabloid->A4/A3 A4/A3->Letter/Tabloid [No]
No Letter/Tabloid->A4/A3 A4/A3->Letter/Tabloid [No]
Specify whether to convert paper sizes in documents automatically to the default paper
sizes specified. For example, if you select Letter/Tabloid->A4/A3, a letter size
document is automatically printed on A4 paper.
sizes specified. For example, if you select Letter/Tabloid->A4/A3, a letter size
document is automatically printed on A4 paper.
Default Paper Sizes
US/Metric [US in the United States, Metric elsewhere]
US/Metric [US in the United States, Metric elsewhere]
Specify whether to print on US paper sizes (for example, Letter, Legal, 11
x
17), or
Metric paper sizes (for example, A4 or A3) by default. This option is also applied when
printing e-mails and images received by Internet Fax. When no page size is defined
within a PostScript file, jobs are printed on Letter paper if you selected US; or A4
paper if you selected Metric.
printing e-mails and images received by Internet Fax. When no page size is defined
within a PostScript file, jobs are printed on Letter paper if you selected US; or A4
paper if you selected Metric.
1.
In the main Setup menu, choose PS Setup.
2.
Enter the options appropriate to the printing requirements at the site.
3.
When you have finished, save changes.
Click on the first or last page to see other AR-PE3 (serv.man12) service manuals if exist.