DOWNLOAD Sharp AR-PE3 (serv.man12) Service Manual ↓ Size: 1.77 MB | Pages: 127 in PDF or view online for FREE

—Specify whether the Fiery X3e prints the Job Log 

after every 55 jobs. The Job Log lists the last 55 jobs processed on the Fiery X3e, with 
accounting information about each one, including user name, document name, time 
and date printed, number of pages, and other job information.

—Specify whether the Fiery X3e clears the Job 

Log after every 55 jobs. If you do not select this option, the Fiery X3e saves a file 
containing a record of all jobs ever printed. Since this file takes up space on the 
Fiery X3e hard disk, clearing the Job Log frees up additional disk space.

You can clear the Job Log manually at any time with the job management tools. 

—Select a paper size for the printed Job Log.

Network Setup configures the Fiery X3e to receive print jobs over the networks used at 
your site. If the Fiery X3e is configured to enable more than one protocol, it 
automatically switches to the correct protocol when it receives a print job. When two 
network ports are enabled, print jobs can be received over all ports at the same time.

You can view and specify the following network settings in Network Setup:

• Adapters and ports—currently configured network adapters and port settings

• Protocols—including AppleTalk, IPX/SPX, and TCP/IP

• Print Services—including LPD printing (TCP/IP), NetWare printing (PServer), 

Windows print sharing (SMB), HTTP support (WWW), Internet Printing Protocol 
(IPP) printing, and Port 9100 printing

• E-mail Service—specify the Fiery E-mail Service

—Select to connect the Fiery X3e to an Ethernet network.

—Choose Auto Detect if your network environment is mixed, or 

choose the speed of the network to which the Fiery X3e is attached (10 Mbps or 
100 Mbps).

 

You can change AppleTalk, IPX/SPX, and TCP/IP protocol settings for the Fiery X3e. 
Change these settings on the Protocol1 and Protocol2 tabs.