Sharp AR-PE3 (serv.man12) User Manual / Operation Manual ▷ View online
5
5-9
Network Setup
AppleTalk
The current AppleTalk zone is displayed.
5
5-10
Setting up the Fiery X3e from a Windows Computer
IPX/SPX
Use this option to specify IPX/SPX frame types.
The Fiery X3e supports the following Ethernet frame types for IPX/SPX:
Ethernet 802.2, Ethernet 802.3, Ethernet II, and Ethernet SNAP. You can also allow
the Fiery X3e to select the frame type automatically.
Ethernet 802.2, Ethernet 802.3, Ethernet II, and Ethernet SNAP. You can also allow
the Fiery X3e to select the frame type automatically.
5
5-11
Network Setup
DNS Setup
You can enable DNS Setup to allow the Fiery X3e to use the Fiery X3e features and
also to resolve a name to an IP address.
also to resolve a name to an IP address.
5
5-12
Setting up the Fiery X3e from a Windows Computer
TCP/IP
Specify TCP/IP settings. The current settings for IP address, subnet mask, and default
gateway address are displayed. For information about setting up printing with TCP/IP,
see Chapter 2.
gateway address are displayed. For information about setting up printing with TCP/IP,
see Chapter 2.
The Fiery X3e requires a unique, valid IP address. You can set a static address or specify
that the Fiery X3e obtains the IP addresses automatically.
that the Fiery X3e obtains the IP addresses automatically.
N
OTE
:
If you specify the DHCP or BOOTP protocol, the Fiery X3e restarts when you
save your changes and exit Setup. Allow the Fiery X3e to restart and return to Idle
before printing a Configuration page or proceeding with any other operations.
before printing a Configuration page or proceeding with any other operations.
Click on the first or last page to see other AR-PE3 (serv.man12) service manuals if exist.