Sharp AR-P350 / AR-P450 (serv.man8) Service Manual ▷ View online
AR-P350 DIAG-15
TEST PRINT XX
Printing Test
Used to perform self-printing under the set conditions, and to adjust and check the engine set value.
Used to perform self-printing under the set conditions, and to adjust and check the engine set value.
Selection Menu:
Menu
Content
Initial
value
value
Set range
LCD display
Content
Set value
MULTI SETTING
Continuous print
quantity setup
quantity setup
001 - 999
PRINT PATTERN
Test print pattern
1 - 99 (94 - 97 for production only)
1
Off center pattern
40
White copy
64
All white copy
70
Scale pattern
71
Grid pattern
75
ID: BG pattern
87
Test image pattern
CASSETTE
Cassette selection
BPT: No. 1 tray
TRAY1: No. 1 tray (STD)
TRAY2: No. 2 tray
TRAY1: No. 1 tray (STD)
TRAY2: No. 2 tray
DESK1: No. 3 tray
DESK2: No. 4 tray
LCC: LCC tray
DESK2: No. 4 tray
LCC: LCC tray
DUPLEX
Duplex setup
NO/USE
OUTPUT
Paper exit,
finishing
method setup
finishing
method setup
STD: Standard paper exit tray
JSP:
FIN1: Finisher Top
FIN2: Finisher Second
STAPLE (F): Staple front
STAPLE (R): Staple rear
STAPLE (2POS): Staple
2 positions
JSP:
FIN1: Finisher Top
FIN2: Finisher Second
STAPLE (F): Staple front
STAPLE (R): Staple rear
STAPLE (2POS): Staple
2 positions
SADLE: Saddle
OFFSET: Offset
PUNCH: Punch
MAIL_TEST
BIN1: No. 1
~
bin-BIN8: No.8 bin
OFFSET: Offset
PUNCH: Punch
MAIL_TEST
BIN1: No. 1
~
bin-BIN8: No.8 bin
LEAD EDGE
Lead edge
1 - 99 (mm)
LEAD EDGE VOID
Lead edge void setup
1 - 99 (mm)
TAIL EDGE VOID
Rear edge void setup
1 - 99 (mm)
SIDE EDGE VOID
Side edge void setup
1 - 99 (mm)
T1 PAPER BUCKLE
Tray 1
resist quantity setup
resist quantity setup
1 - 99
T2 PAPER BUCKLE
Tray 2
resist quantity setup
resist quantity setup
1 - 99
T3 PAPER BUCKLE
Tray 3
resist quantity setup
resist quantity setup
1 - 99
T4 PAPER BUCKLE
Tray 4
resist quantity setup
resist quantity setup
1 - 99
MFT PAPER BUCKLE Manual feed resist
quantity adjustment
1 - 99
ADU PAPER BUCKLE Auto duplex resist
quantity setup
1 - 99
MFT OFF CENTER
ADJ
ADJ
Manual feed tray
off-center adjustment
off-center adjustment
0 - 99
T1 OFF CENTER ADJ Tray 1
of-center adjustment
0 - 99
T2 OFF CENTER ADJ A3 universal tray
off-center adjustment
0 - 99
T3 OFF CENTER ADJ Desk 1 tray/LCC1
off-center adjustment
0 - 99
T4 OFF CENTER ADJ Desk 2 tray/LCC2
off-center adjustment
0 - 99
ADU OFF CENTER
ADJ
ADJ
Duplex off-center
adjustment value
setup
adjustment value
setup
0 - 99
AR-P350 DIAG-16
WARM UP TIME
DISPLAY
DISPLAY
Warm up time display mode.
Used to display the warm-up time.
(LCD display)
Used to display the warm-up time.
(LCD display)
*Pressing [OK] key enter the Warm up time display mode.
*Pressing [BACK/C] key terminates the Warm up time display mode.
COUNTER DATA
DISPLAY
DISPLAY
Counter data display.
Used to display each counter value.
(LCD display)
Used to display each counter value.
(LCD display)
*Pressing the [
] or [
] key selects the counter group for the counter display mode.
*Pressing [OK] key displays the counter value.
*Using [MENU] moves to the next item.
*Using [MENU] moves to the next item.
*Pressing [BACK/C] key terminates the Counter Display Mode.
COUNTER DISP XXXX::
Menu
Content
Initial
value
value
Set range
WARM UP TIME DISPLAY
COUNTER DISPLAY
COUNTER DISP.
PROCESS COUNTER DISP.
TOTAL
Total print quantity
DRUM
Drum counter
DRUM
Drum counter
TONER
Toner counter
TONER
Toner counter
DEVE
Developing counter
DEVE
Developing counter
MAINTE
Maintenance counter
MAINTE
Maintenance counter
DRUM MOTOR TIME Drum motor drive time
TOTAL
OUTPUT
OUTPUT
Copy counter
(Effective paper counter)
(Effective paper counter)
DV MOTOR TIME
Developing motor drive time
STAPLE COUTNER DISP.
PROCESS WAY
Process system
STAPLE
Staple counter
DESTINATION
Destination
PUNCH
Punch counter
FEED COUNTER DISP.
TRAY1
Paper feed tray 1 counter
TRAY2
Paper feed tray 2 counter
LCC1/TRAY3
Paper feed tray 3 counter
LCC2/TRAY4
LCC2
or paper feed tray 4 counter
or paper feed tray 4 counter
MFT
Manual paper feed counter
ADJ
Duplex counter
AR-P350 DIAG-17
COUNTER DATA
CLEAR
CLEAR
Counter data clear.
Used to clear each counter value.
(LCD display)
Used to clear each counter value.
(LCD display)
*Pressing the [
] or [
] key selects the counter group for the counter clear mode.
*Pressing [OK] key displays the counter clear group.
*Using [MENU] moves to the next mode
*Using [MENU] moves to the next mode
*Pressing the [
] or [
] keys changes the YES or NO.
*Pressing [OK] key starts the counter data clear mode.
*Pressing [BACK/C] key terminates the counter data clear mode.
*Pressing [BACK/C] key terminates the counter data clear mode.
COUNTER CLEAR:
TROUBLE CANCEL X
Trouble cancel.
Used to cancel a trouble code.
(LCD display)
Used to cancel a trouble code.
(LCD display)
*Pressing the [
] or [
] key selects the trouble cancel mode.
*Pressing [OK] key start the trouble cancel mode.
*Using [
*Using [
] and [
] keys changes the YES or NO.
*Pressing [OK] key starts the trouble cancel mode.
*Pressing [BACK/C] key terminates the trouble cancel mode.
XXX SIZE SETUP
Tray size setting.
Used to set the paper size on No. 1 paper feed tray and the LCC tray.
(LCD display)
Used to set the paper size on No. 1 paper feed tray and the LCC tray.
(LCD display)
*Pressing the [
] or [
] key select the tray.
*Pressing [OK] key displays the tray size.
*Using [
] and [
] keys changes the tray size.
*Pressing [OK] key set the change of the tray size.
*Pressing [BACK/C] key terminates the setting.
*Pressing [BACK/C] key terminates the setting.
Tray1
LCC
Menu
Content
Initial
value
value
Set range
XXXXX COUNTER CLEAR
FEED COUNTER CLEAR
DEVE COUNTER CLEAR
TRAY1
Paper feed tray 1 counter
DEVE
Developing counter
TRAY2
Paper feed tray 2 counter
DRUM COUNTER CLEAR
LCC1/TRAY3
Paper feed tray 3 counter
DRUM
Drum counter
LCC1/TRAY4
LCC1 or paper ray tray 4 counter TONER COUNTER CLEAR
MFT
Manual paper feed counter
TONER
Toner counter
ADU
Duplex counter
OUTPUT COUNTER CLEAR
STAPLE COUNTER CLEAR
TOTAL OUTPUT
Copy counter
(Effective paper
counter)
(Effective paper
counter)
STAPLE
Staple counter
TIMER DATA CLEAR
PUNCH
Punch counter
DRUM ROTATION
Drum motor RPM
MNT COUNTER CLEAR
DEVE ROTATION
Developing motor
RPM
RPM
MENTENANCE Maintenance counter
TROUBLE CANCEL X
X:
E-TBL
Cancel troubles except for U2 in the engine mode.
E-U2
Cancel U2 trouble in the engine mode.
C-TBL
Cancel trouble in the contoroller mode.
XXX SIZE SETUP
XXX:
TRAY1
TRAY1
LCC
LCC
Set
value
A4
B5
8.5"x11"
Set
value
A4
8.5"x11"
AR-P350 DIAG-18
DESTINATION SETUP Destination setup.
Used to perform the destination setup.
(LCD display)
(LCD display)
*Pressing the [
] or [
] key select the destination.
*Pressing [OK] key displays the destination.
*Using [
*Using [
] and [
] keys changes the destination.
*Pressing [OK] key set the change of the destination.
*Pressing [BACK/C] key terminates the setting.
TRAY DETECT
TYPE xx
TYPE xx
Tray detect type setting.
Used to select between the AB series and the inch series for size detection of each paper feed tray.
(LCD display)
Used to select between the AB series and the inch series for size detection of each paper feed tray.
(LCD display)
*Pressing the [
] or [
] key select the tray.
*Pressing [OK] key displays the destination.
*Using [
*Using [
] and [
] keys changes the destination.
*Pressing [OK] key set the change of the destination.
*Pressing [BACK/C] key terminates the setting.
CE MARK SETTING
CE mark setting.
Used to set the operation mode conforming to the CE mark.
(LCD display)
Used to set the operation mode conforming to the CE mark.
(LCD display)
*Pressing [OK] key start the setting.
*Using [
] and [
] keys changes the YES or NO.
*Pressing [OK] key memorize the CE mark mode.
*Pressing [BACK/C] key terminates the setting.
COUNTUP MODE
SETUP
SETUP
countup mode setup.
1.Used to set the count-up mode of A3 (11 x 17) paper.
2.Used to set whether to perform count-up of blank paper.
(LCD display)
1.Used to set the count-up mode of A3 (11 x 17) paper.
2.Used to set whether to perform count-up of blank paper.
(LCD display)
*Pressing the [
] or [
] key select the counter mode.
*Pressing [OK] key start the setting.
*Using [
] and [
] keys changes the countup number.
*Pressing [OK] key memorize the countup number.
*Pressing [BACK/C] key terminates the setting.
*Pressing [BACK/C] key terminates the setting.
A ~ C
D
Menu
Content
Initial
value
value
Set range
DESTINATION SETUP
TRAY DETECT TYPE XXX
XX:
M:
MFT
T2:
A3 Universal tray
T3:
Desk tray1
T4:
Desk tray2
Set
value
AB
INCH
CE MARK SETTING
Set
value
YES
NO
COUNTUP MODE SETUP X
X:
A:
total counter A3(11X17) countup mode.
B:
mainte counter A3(11X17) countup mode.
C:
deve counter A3(11X17) countup mode.
D:
blank paper countup mode.
Set
value
SINGLE
DOU-
BLE
Set
value
NO
(NO-
COUNT
UP)
YES
(COU-
NT UP)
Click on the first or last page to see other AR-P350 / AR-P450 (serv.man8) service manuals if exist.