Sharp AR-P350 / AR-P450 (serv.man8) Service Manual ▷ View online
AR-P350 DIAG-19
MNT CYCLE SETUP
Maintenance cycle setup.
Used to set the maintenance cycle.
(LCD display)
Used to set the maintenance cycle.
(LCD display)
*Pressing [OK] key displays the maintenance cycle.
*Using [
] and [
] keys changes the maintenance cycle.
*Pressing [OK] key set the change of the maintenance cycle.
*Pressing [BACK/C] key terminates the setting.
LIFE OVER SETTING
Life over setting.
Used to set whether to stop printing when the developer life is over.
(LCD display)
Used to set whether to stop printing when the developer life is over.
(LCD display)
*Pressing [OK] key start the setting.
*Using [
] and [
] keys changes the YES or NO.
*Pressing [OK] key memorize the life over mode.
*Pressing [BACK/C] key terminates the setting.
*Pressing [BACK/C] key terminates the setting.
FINISHER JOGGER
ADJ.
ADJ.
Finisher jogger adjustment.
Used to adjust the finisher (AR-FN6/FN7) jogger.
For details, refer to each Service Manual of the AR-FN6/FN7.
(LCD display)
Used to adjust the finisher (AR-FN6/FN7) jogger.
For details, refer to each Service Manual of the AR-FN6/FN7.
(LCD display)
*Press [OK] key to display the finisher jogger adjustment value.
*Using [
] or [
] key changes the value.
*Press [MENU] key to display the adjustment value.
*Press [
*Press [
] or [
] key to change the value.
*Pressing [OK] key starts the finisher jogger adjustment.
*DATA ( LED) blinks during the processing.
*Pressing [BACK/C] key terminates the finisher jogger adjustment.
*Pressing [BACK/C] key terminates the finisher jogger adjustment.
CONSOLE FIN. SET X Console finisher setting.
Used to perform the adjustments of the console finisher (AR-FN7).
For details, refer to the Service Manual of the AR-FN7.
(LCD display)
For details, refer to the Service Manual of the AR-FN7.
(LCD display)
*Pressing the [
] or [
] key select the console finisher mode.
*Pressing [OK] key start the setting.
*Using [
*Using [
] and [
] keys changes the value.
*Pressing [OK] key memorize thevalue.
*Pressing [BACK/C] key terminates the setting.
Menu
Content
Initial
value
value
Set range
MNT CYCLE SETUP
Set
value
DEFAU
LT
40K
50K
80K
100K
120K
FREE
LIFE OVER SETTING
Set
value
YES
NO
FINISHER JOGGER ADJ.
CONSOLE FIN. SET X
AR-P350 DIAG-20
CONSOLE FIN. SET X Console finisher setting.
Used to perform the adjustments of the console finisher (AR-FN7).
For details, refer to the Service Manual of the AR-FN7.
For details, refer to the Service Manual of the AR-FN7.
TROUBLE MEM.
MODE SET
MODE SET
Trouble memory mode setting.
Used to set the storing method of data into memory in case of a trouble.
(LCD display)
Used to set the storing method of data into memory in case of a trouble.
(LCD display)
*Pressing [OK] key start the setting.
*Using [
] and [
] keys changes the value.
*Pressing [OK] key memorize thevalue.
*Pressing [BACK/C] key terminates the setting.
*Pressing [BACK/C] key terminates the setting.
LAST JAM CODE DISP Last jam code display.
Used to display the jam history.
(LCD display)
(LCD display)
*Pressing [OK] key enter the last jam code display mode.
*Pressing [BACK/C] key terminates the last jam code display mode.
*Pressing [BACK/C] key terminates the last jam code display mode.
SYSTEM
INFORMATION X
INFORMATION X
System information dispaly.
Use to display the machine information.
(LCD display)
Use to display the machine information.
(LCD display)
*Pressing the [
] or [
] key selects the group.
*Pressing [OK] key displays the system information.
*Using [MENU] moves to the next item.
*Pressing [BACK/C] key terminates the system information
Mode group is:
Menu
Content
Initial
value
value
Set range
X:
A:
saddle binding position
B:
saddle fold position
C:
console finisher adjustment (front)
D:
console finisher adjustment (rear)
E:
staple position (rear)
F:
staple position (front)
G:
center adjustment (staple)
H:
staple pitch
I:
center adjustment (punch)
J:
punch position
MEMORY MODE SETTING
Set value
Operation
ONCE
The same trouble as the previous one is not stored.
ANY
Any trouble is stored unconditionally.
Set
value
ONCE
ANY
LAST JAM CODE DISP
SYSTEM INFORMATION X
X:
A:
ROM version
B:
machine speed
C:
process type
AR-P350 DIAG-21
PROCESS DATA
DISPLAY
DISPLAY
Process control data display.
(LCD display)
(LCD display)
*Pressing the [
] or [
] key selects the group.
*Pressing [OK] key displays the process control data.
*Using [MENU] moves to the next item
*Pressing [BACK/C] key terminates the process control data display mode.
group is:
XXX CHECK.
Controller port check.
(LCD display)
(LCD display)
*Pressing the [
] or [
] key selects the port check mode.
*Pressing [OK] key start the port check.
*Pressing [BACK/C] key terminates the the port check mode.
SELECT IN SIGNAL
SET
SET
Select in signal setting.
(LCD display)
(LCD display)
*Pressing [OK] key start the select in signal setting mode.
*Using the [
] and [
] keys changes the ON or OFF.
*Pressing [OK] key starts the select in signal setting.
*Pressing [BACK/C] key terminates the select in signal setting mode.
Menu
Content
Initial
value
value
Set range
DRUM ADJ. (VG)
30
X:
A:
process control data
B:
toner control data
CENTRO PORT CHECK
OK
XXX:
CENTRO PORT CHECK
NIC CHECK (network interface card check)
SELECT IN SIGNAL SET
ON
AR-P350 TROUBLE CODES-1
[11] TROUBLE CODES
1.Trouble codes list
Trouble
codes
Contents
Remark
Trouble
detection
C1
00 MC trouble
PCU
E7
02 Laser trouble
PCU
03 HDD trouble
With HDD
installed
installed
Controller
06 Decode error trouble
Controller
50 LSU connection trouble
PCU
F1
00 Finisher communication trouble With Finisher
installed
PCU
08 Finisher staple shift motor
trouble
With Finisher
installed
installed
PCU
80 Finisher 24V power supply
trouble
With Finisher
installed
installed
PCU
87 Finisher staple rotation motor
trouble
With Finisher
installed
installed
F1
00 Mail bin stacker communication
trouble
With Mail bin
stacker installed
stacker installed
PCU
02 mail bin stacker main drive
motor trouble
With Mail bin
stacker installed
stacker installed
PCU
12 Mail bin stacker gate trouble
With Mail bin
stacker installed
stacker installed
PCU
80 Mail bin stacker 24V power
supply trouble
With Mail bin
stacker installed
stacker installed
PCU
F1
03 Console finisher paddle motor
trouble
With Console
Finisher
installed
Finisher
installed
PCU
06 Console finisher slide motor
trouble
With Console
Finisher
installed
Finisher
installed
PCU
10 Console finisher stapler motor
trouble
With Console
Finisher
installed
Finisher
installed
PCU
11 Console finisher bundle exit
motor trouble
With Console
Finisher
installed
Finisher
installed
PCU
15 Console finisher lift motor
trouble
With Console
Finisher
installed
Finisher
installed
PCU
19 Console finisher alignment
motor trouble FRONT
With Console
Finisher
installed
Finisher
installed
PCU
20 Console finisher alignment
motor trouble
With Console
Finisher
installed
Finisher
installed
PCU
30 Console finisher
communication trouble
With Console
Finisher
installed
Finisher
installed
PCU
31 Console finisher fold sensor
trouble
With Console
Finisher
installed
Finisher
installed
PCU
32 Console finisher punch unit
communication trouble
With Console
Finisher
installed
Finisher
installed
PCU
33 Console finisher punch side
register motor trouble
With Console
Finisher
installed
Finisher
installed
PCU
34 Console finisher punch motor
trouble
With Console
Finisher
installed
Finisher
installed
PCU
35 Console finisher punch side
register sensor trouble
With Console
Finisher
installed
Finisher
installed
PCU
F1
36 Console finisher punch timing
sensor trouble
With Console
Finisher
installed
Finisher
installed
PCU
37 Console finisher backup RAM
trouble
With Console
Finisher
installed
Finisher
installed
PCU
38 Console finisher punch backup
RAM trouble
With Console
Finisher
installed
Finisher
installed
PCU
81 Console finisher transport
motor trouble
With Console
Finisher
installed
Finisher
installed
PCU
F2
00 Toner concentration sensor
open
PCU
02 Toner supply abnormality
PCU
04 Improper cartridge
(Destination error, life cycle
error)
error)
PCU
05 CRUM error
PCU
39 Process thermistor breakdown
PCU
F3
12 Tray 1 lift-p trouble
PCU
22 Tray 2 lift-up trouble
(Multi-purpose tray)
Multi-purpose
tray
tray
PCU
H2
00 Thermistor open (HL1)
PCU
01 Thermistor open (HL2)
PCU
H3
00 Heat roller high temperature
detection (HL1)
PCU
01 Heat roller high temperature
detection (HL2)
PCU
H4
00 Heat roller low temperature
detection (HL1)
PCU
01 Heat roller low temperature
detection (HL2)
PCU
H5
01 5-time continuous POD1
not-reaching JAM detection
PCU
L4
01 main motor lock detection
PCU
02 Drum motor lock detection
PCU
L6
10 Polygon motor lock detection
PCU
L8
01 No full-wave signal
PCU
02 Full-wave signal width
abnormality
PCU
U6
00 Desk/LCC communication
trouble
With Paper feed
desk installed
desk installed
PCU
01 Desk/LCC1CS lift-up trouble
(Multi-purpose tray)
With Paper feed
desk installed
desk installed
PCU
02 Desk2 CS lift-up trouble/LCC1
lift-up trouble
With Paper feed
desk installed
desk installed
PCU
03 Desk3 CS lift-up trouble/LCC2
lift-up trouble
With Paper feed
desk installed
desk installed
PCU
10 Desk/LCC transport motor
trouble
With Paper feed
desk installed
desk installed
PCU
EE EL Auto developer adjustment
trouble (Over-toner)
Only during
DIAG
DIAG
PCU
EU Auto developer adjustment
trouble (Under-toner)
Only during
DIAG
DIAG
PCU
F9
02 Centro port check error
Controller
03 NIC port check error
Controller
U1
01 Battery abnormality
With FAX board
installed
installed
Controller
U2
00 EEPROM read/write error
(Controller)
Controller
11 Counter check sum error
(Controller EEPROM)
Controller
Trouble
codes
Contents
Remark
Trouble
detection
Click on the first or last page to see other AR-P350 / AR-P450 (serv.man8) service manuals if exist.