Sharp AR-P350 / AR-P450 (serv.man8) Service Manual ▷ View online
AR-P350 DIAG-11
LOAD TEST XX
Load test mode.
Used to perform the operation test of the motors and clutches of the machine and the options.
Used to perform the operation test of the motors and clutches of the machine and the options.
(Selectable Loads Grope)
AUTOMATIC DV ADJ.
Automatic DV adjustment.
Used to perform the auto developer adjustment.
(LCD display)
Used to perform the auto developer adjustment.
(LCD display)
*Pressing [OK] key starts the automatic DV adjustment.
*Toner control sensor value is displayed in the LCD during the operation.
*DATA ( LED) blinks during the processing
*When adjustment error occurred, ERROR LED lights up.
*When adjustment error occurred, ERROR LED lights up.
*Adjustment value is memorized after 2 minutes DV stirring.
*Pressing [BACK/C] key terminates the adjustment mode.
LASER OUTPUT
SETUP (XXX)
SETUP (XXX)
Laser output setup.
Used to set the laser output value.
Used to set the laser output value.
(LCD display)
*Pressing [
] or [
] key selects the LASER OUTPUT SETUP mode.
*Pressing [OK] key starts the laser output setup.
*Using [
] or [
] key changes the value.
*Pressing [OK]key memorize the value.
*Pressing [BACK/C] key terminates the setting.
*Pressing [BACK/C] key terminates the setting.
Menu
Content
Initial
value
value
Set range
06: Finisher
07: Saddle finisher
08: Male bin stacker
T2S
Offset tray solenoid
STUM
Staple shift motor
T2OM
Offset tray paper exit motor
MM
Main motor
SPS
Stopper solenoid
EVM
Elevator motor
SCRS
Pressure relief solenoid
STM
Staple motor
PPS
Rear edge holding solenoid
JRM
Jogger R motor
SCGS
Staple paper entry gate solenoid JFM
Jogger F motor
STTM
Staple rotation motor
PSM
Finisher motor
FFC
FRJM
FPSM
FFJM
FPNM
FAM
FLM
FPM
FFSM
FFM
MM
Main drive motor
MGSOL4
Gate solenoid 4
MGSOL1
Gate solenoid 1
MGSOL5
Gate solenoid 5
MGSOL2
Gate solenoid 2
MGSOL6
Gate solenoid 6
MGSOL3
Gate solenoid 3
MGSOL7
Gate solenoid 7
AUTOMATIC DV ADJ.
128
Note: Do not change the factory setup on the laser output.
LASER POWER SET(XX)
XX
AE
AE mode
CHR
Text mode
MIX
Text/Photo mode
PHT
Photo mode
PRT
Printer mode
FAX
Fax mode
AR-P350 DIAG-12
FUSER control
temperature setting X
temperature setting X
Fuser control Temperature setting.
Used to set the fusing temperature.
(LCD display)
Used to set the fusing temperature.
(LCD display)
*Using [
] or [
] key select the thermistor.
*Pressing [OK] key starts the setting.
*Using [
*Using [
] or [
] key changes the value.
*Pressing [OK] key memorize the value.
*Pressing [BACK/C] key terminates the setting.
SLOW UP SETTING
Process control value setting.
Used to set the process control value for each destination.
Used to set the process control value for each destination.
*Using [
] or [
] key select the process control value.
*Pressing [OK] key starts the setting.
*Using [
] or [
] key changes the value.
*Pressing [OK] key memorize the value.
*Pressing [BACK/C] key terminates the setting.
Menu
Content
Initial
value
value
Set range
FUSER TEMP.SETTING X
X:
A:
control temperature FUSER 1
B:
control temperature FUSER 2
C:
preheat temperature FUSER 1
D:
preheat temperature FUSER 2
E:
Bypass tray control temperature FUSER 1
F:
Bypass tray control temperature FUSER 2
SLOW UP SETTING X
X:
A:
slow up adjust wait time
B:
Vb1-1
C:
Vb1-2
D:
Vb1-3
E:
Vb2-1
F:
Vb2-2
G:
Vb2-3
AR-P350 DIAG-13
SIZE adjstment X
SIZE adjustment .
Used to perform the size detection adjustment of the optional universal tray and the manual feed tray.
(LCD display)
Used to perform the size detection adjustment of the optional universal tray and the manual feed tray.
(LCD display)
*Using [
] or [
] key select the tray.
Pressing [OK] key enter the adjustment mode.
(Selectable modes)
<select A>
1. Widen the guide to the MAXIMUM position.
1. Widen the guide to the MAXIMUM position.
*Pressing [OK] key starts the adjustment.
2.Narrow the guide to the MINIMUM position.
*Pressing [OK] key starts the adjustment.
*Pressing [BACK/C] key terminates the setting.
<select B>
*Pressing [OK] key displays the adjustment value.
*Pressing [OK] key displays the adjustment value.
*Using [
] and [
] keys changes the value.
*Pressing [OK] key set the changes of the value, and moves to the next mode
*Pressing [BACK/C] key terminates the setting.
<select C>
1. Widen the guide to the MAXIMUM position.
1. Widen the guide to the MAXIMUM position.
*Pressing [OK] key starts the adjustment.
2.Guide to the P1 position.
*Pressing [OK] key starts the adjustment.
3.Guide to the P2 position.
*Pressing [OK] key starts the adjustment.
4.Narrow the guide to the MINIMUM position.
*Pressing [OK] key starts the adjustment.
*Pressing [BACK/C] key terminates the setting.
ICU PRINT MODE SET Icu print mode setting.
*Press [OK] key to start the setup mode.
*Press [MENU] key to shift to the next item.
*Pressing [MENU] moves to the next item
*Using [
*Using [
] and [
] keys changes the mode.
*Pressing [BACK/C] key releases the print mode set.
*Pressing [OK] key starts the print mode set.
*DATA ( LED) blinks during the print mode set execution.
*DATA ( LED) blinks during the print mode set execution.
Menu
Content
Initial
value
value
Set range
SIZE ADJUSTMENT X
X:
A:
A3 Universal tray adjustment
B:
Bypass tray setting
C:
Bypass tray adjustment
ICU PRINT MODE SET
AR-P350 DIAG-14
TEST PRINT XX
Printing Test
Used to perform self-printing under the set conditions, and to adjust and check the engine set value.
Used to perform self-printing under the set conditions, and to adjust and check the engine set value.
*Pressing [
] or [
] key selects the mode.
XX(select the number changed to decimal.)
Aging mode:
example: If you need "Aging mode" only, select "16".
If you need "Aging mode" and "No jam detection", select "17".
*Pressing [OK] key displays the setting menu for printing test.
If you need "Aging mode" and "No jam detection", select "17".
*Pressing [OK] key displays the setting menu for printing test.
*Pressing [MENU] moves to the next item
*Using [
*Using [
] and [
] keys changes the mode.
*Pressing [BACK/C] key releases the printing menu mode.
*Pressing [OK] key starts the printing test.
*DATA ( LED) blinks during the TEST PRINT execution.
*DATA ( LED) blinks during the TEST PRINT execution.
Menu
Content
Initial
value
value
Set range
TEST PRINT 00
1 : No Jam detection
1 : No Fuser Control
1 : No warm up cycle
1 : No Developer detection
1 : Aging mode
1 : Aging mode
7 6 5 4 3 2 1 0
Set value
XX
Mode
Set value
XX
Mode
0
16
Aging mode
1
No jam detection
17
Aging mode + No jam detection
2
No fusing control
18
Aging mode + No fusing control
3
No fusing control + No jam detection
19
Aging mode + No fusing control
+ No jam detection
+ No jam detection
4
No warm-up cycle
20
Aging mode + No warm-up cycle
5
No warm-up cycle + No jam detection
21
Aging mode
+ No warm-up cycle No jam
detection
+ No warm-up cycle No jam
detection
6
No warm-up cycle + No fusing control
22
Aging mode + No warm-up cycle
+ No fusing detection
+ No fusing detection
7
No warm-up cycle + No fusing control
+ No jam detection
+ No jam detection
23
Aging mode + No warm-up cycle
+ No fusing detection
+ No jam detection
+ No fusing detection
+ No jam detection
8
No DV detection
24
Aging mode + No DV detection
9
No DV detection + No jam detection
25
Aging mode + No DV detection
+ No jam detection
+ No jam detection
10
No DV detection + No fusing control
26
Aging mode + No DV detection
+ No fusing control
+ No fusing control
11
No DV detection + No fusing control
+ No jam detection
+ No jam detection
27
Aging mode + No DV detection
+ No fusing control
+ No jam detection
+ No fusing control
+ No jam detection
12
No DV detection + No warm-up cycle
28
Aging mode + No DV detection
+ No warm-up cycle
+ No warm-up cycle
13
No DV detection + No warm-up cycle
+ No jam detection
+ No jam detection
29
Aging mode + No DV detection
+ No warm-up cycle
+ No jam detection
+ No warm-up cycle
+ No jam detection
14
No DV detection + No warm-up cycle
+ No fusing control
+ No fusing control
30
Aging mode + No DV detection
+ No warm-up cycle
+ No fusing control
+ No warm-up cycle
+ No fusing control
15
No DV detection + No warm-up cycle
+ No fusing control + No jam detection
+ No fusing control + No jam detection
31
Aging mode + No DV detection
+ No warm-up cycle
+ No fusing control
+ No jam detection
+ No warm-up cycle
+ No fusing control
+ No jam detection
Click on the first or last page to see other AR-P350 / AR-P450 (serv.man8) service manuals if exist.