Sharp AR-M700 (serv.man31) Service Manual ▷ View online
AR-M550/M620/M700 OTHER 12 - 13
B. Inserter (AR-CF2) paper jam judgment conditions
*1) The take-up position is 30mm downstream from the vertical path transport roller.
*2) The reverse stop position is 20mm downstream from the reverse sensor.
JAM CODE
Name
JAM detection method
JAM judge distance
JAM detection start trigger
JAM judge detector
REG_SEN_N
Resist sensor not-reached
JAM
JAM
Separation start
Resist sensor ON
(Distance from pick descending start to
resist sensor ON) x 5
resist sensor ON) x 5
REG_SEN_S
Resist sensor remaining
JAM
JAM
Transport start from the
take-up position (*1)
take-up position (*1)
Resist sensor OFF
Max. document length (WLT) - (Resist
sensor OFF to take-up position) + 200mm
sensor OFF to take-up position) + 200mm
TIM_SEN_N
Timing sensor not-reached
JAM
JAM
Resist sensor ON
Timing sensor ON
Distance from resist sensor ON to timing
sensor ON + 200mm
sensor ON + 200mm
TIM_SEN_S
Timing sensor remaining
JAM
JAM
Resist sensor OFF
Timing sensor OFF
Distance from resist sensor OFF to timing
sensor OFF + 200mm
sensor OFF + 200mm
HI_SEN_NI
Paper exit sensor not-
reached JAM (Inserter
paper feed)
reached JAM (Inserter
paper feed)
Timing sensor ON
Paper exit sensor ON
Distance from timing sensor ON to paper
exit sensor ON + 200mm
exit sensor ON + 200mm
HI_SEN_NP
Paper exit sensor not-
reached JAM (Main unit
paper feed)
reached JAM (Main unit
paper feed)
Main unit paper exit
command receive
command receive
Paper exit sensor ON
Distance from main unit side to paper exit
sensor ON + 500mm
sensor ON + 500mm
HI_SEN_S
Paper exit sensor remaining
JAM (Main unit paper feed)
JAM (Main unit paper feed)
After passing by 20mm from
the paper exit sensor ON
the paper exit sensor ON
Paper exit sensor
OFF
OFF
Max. document length (WLT) + 200mm
Paper exit sensor remaining
JAM (Inserter paper feed)
JAM (Inserter paper feed)
Timing sensor OFF
Paper exit sensor
OFF
OFF
Distance from timing sensor OFF to paper
exit sensor OFF + 200mm
exit sensor OFF + 200mm
H_SEN_NIN
Reverse sensor not-
reached JAM (When
entering the reverse path)
reached JAM (When
entering the reverse path)
Timing sensor ON
Reverse sensor ON
Distance from timing sensor ON to reverse
sensor ON + 100mm
sensor ON + 100mm
H_SEN_NOUT
Reverse sensor not-
reached JAM (When exiting
from the reverse path)
reached JAM (When exiting
from the reverse path)
Switchback start
Reverse sensor ON
Distance from reverse stop position (*2) to
reverse sensor ON + 100mm
reverse sensor ON + 100mm
H_SEN_SIN
Reverse sensor remaining
JAM (When entering the
reverse path)
JAM (When entering the
reverse path)
Timing sensor OFF
Reverse sensor OFF
Distance from timing sensor OFF to reverse
sensor OFF + 100mm
sensor OFF + 100mm
H_SEN_SOUT
Reverse sensor remaining
JAM (When exiting from the
reverse path)
JAM (When exiting from the
reverse path)
After passing 20mm from
the reverse sensor ON
the reverse sensor ON
Reverse sensor OFF
Max. Document length (WLT) + 100mm
MM
MM
MM
MM
MM
MM
FUM
FUM
POM1
POM1
POM2
POM2
TM1X
TM1X
TM2X
TM2X
DVM
DVM
DM
DM
ADM1
ADM1
ADM2
ADM2
VPM
VPM
TRM
TRM
SPFM
SPFM
SPSM
SPSM
SLUMB
SLUMB
K_MOT
K_MOT
LTM
LTM
M1
M1
M6
M6
M2
M2
M7
M7
M8
M8
M2S
M2S
M3S
M3S
M5S
M5S
M8S
M8S
M4S
M4S
M2P
M2P
M1P
M1P
MM
MM
MM
M1LUM
T2LUM
T1LUM
M2LUM
FUM
POM1
H_MOT
K_MOT
Y_MOT
M1
M9
M2P
M1P
M6
M4
M2
M7
M3
M8
M5
M10
M1S
M2S
M6S
M7S
M7S
M3S
M5S
M8S
M4S
POM2
TM1X
TM2X
DVM
DM
ADM1
ADM2
VPM
LLM
LTM
TRM
SPFM
SPSM
MIM
SLUMB
Motor cross section
AR-M550/M620/M700 OTHER 12 - 14
C. Finisher (AR-F15/F16) paper jam judgment conditions
JAM code
Content
JAM
detection method
JAM judgment time
(Stacker: LTR horizontal size
Saddle: LTR vertical size)
JAM detection timer
start trigger
JAM judge detector
Common to 55/62, 70PPM MODELS
(Main unit paper exit speed:
Stacker: 800mm/s
Saddle: 420mm/s)
Saddle: 420mm/s)
FES_N
FINISHER entry port sensor
not-reached JAM
not-reached JAM
Main unit paper exit
command reception
command reception
The paper entry sensor is not turned
ON within the specified time.
ON within the specified time.
500ms
FES_S
FINISHER entry port
remaining JAM
remaining JAM
Paper entry sensor
ON
ON
The paper entry sensor is not turned
OFF within the specified time.
OFF within the specified time.
540ms
FINISHER buffer sensor not-
reached JAM
reached JAM
Paper entry senor
ON
ON
The buffer sensor is not turned ON
within the specified time.
within the specified time.
688ms
FINISHER buffer sensor
remaining JAM
remaining JAM
Buffer sensor ON
The buffer sensor is not turned OFF
within the specified time.
within the specified time.
540ms
FINISHER paper exit sensor
not-reached JAM
not-reached JAM
Entry port sensor ON
The paper exit sensor is not turned
ON within the specified time.
ON within the specified time.
Straight path transport: 453ms
Buffer path transport: 815ms
Buffer path transport: 815ms
FINISHER paper exit sensor
remaining JAM
remaining JAM
Paper exit sensor ON
The paper exit sensor is not turned
OFF within the specified time.
OFF within the specified time.
840ms
FFPS_N
FINISHER saddle transport
path sensor not-reached JAM
path sensor not-reached JAM
Entry port sensor ON
The saddle transport path sensor is
not turned ON within the specified
time.
not turned ON within the specified
time.
914ms
FFPS_S
FINISHER saddle transport
path sensor remaining JAM
path sensor remaining JAM
Saddle transport path
sensor ON
sensor ON
The saddle transport path sensor is
not turned OFF within the specified
time.
not turned OFF within the specified
time.
996ms
FINISHER saddle paper exit
sensor not-reached JAM
sensor not-reached JAM
Folding edge sensor
ON (Completion of
thrust operation)
ON (Completion of
thrust operation)
The saddle transport sensor is not
turned ON though paper is
transported in the specified distance.
turned ON though paper is
transported in the specified distance.
180mm (Twice as much as the
normal distance)
normal distance)
FINISHER saddle paper exit
sensor remaining JAM
sensor remaining JAM
Saddle paper exit
sensor ON
sensor ON
The saddle paper exit sensor is not
turned OFF though paper is
transported in the specified distance.
turned OFF though paper is
transported in the specified distance.
209.25mm (1.5 times as much as the
normal distance)
normal distance)
FEXIT_S
FINISHER bundle exit
remaining JAM
remaining JAM
Start of bundle exit to
the stack tray
the stack tray
The staple tray sensor is not turned
OFF within the specified time.
OFF within the specified time.
1000ms
FSTPL
FINISHER Stacker staple
JAM
JAM
Start of stacker
stapling
stapling
When the staple HP sensor does not
sense ON within the specified time
from staple HP sensor OFF in
stapling process, and when the staple
HP sensor detects ON in reverse
rotation after stopping the stapler.
sense ON within the specified time
from staple HP sensor OFF in
stapling process, and when the staple
HP sensor detects ON in reverse
rotation after stopping the stapler.
500ms
FINISHER saddle staple JAM
Start of saddle
stapling
stapling
When the staple HP sensor does not
sense ON within the specified time
from stapler HP sensor OFF in
stapling process, and when the staple
HP sensor detects ON in reverse
rotation after stopping the stapler.
sense ON within the specified time
from stapler HP sensor OFF in
stapling process, and when the staple
HP sensor detects ON in reverse
rotation after stopping the stapler.
500ms
FPNCH
FINISHER punch JAM
Punch HP OFF after
starting punching
starting punching
The punch HP sensor does not turn
ON within the specified time.
ON within the specified time.
200ms
FDOP
FINISHER door open JAM
One of finisher doors
open
open
Finisher door open is detected in
finishing process.
finishing process.
---
AR-M550/M620/M700 OTHER 12 - 14
C. Finisher (AR-F15/F16) paper jam judgment conditions
JAM code
Content
JAM
detection method
JAM judgment time
(Stacker: LTR horizontal size
Saddle: LTR vertical size)
JAM detection timer
start trigger
JAM judge detector
Common to 55/62, 70PPM MODELS
(Main unit paper exit speed:
Stacker: 800mm/s
Saddle: 420mm/s)
Saddle: 420mm/s)
FES_N
FINISHER entry port sensor
not-reached JAM
not-reached JAM
Main unit paper exit
command reception
command reception
The paper entry sensor is not turned
ON within the specified time.
ON within the specified time.
500ms
FES_S
FINISHER entry port
remaining JAM
remaining JAM
Paper entry sensor
ON
ON
The paper entry sensor is not turned
OFF within the specified time.
OFF within the specified time.
540ms
FINISHER buffer sensor not-
reached JAM
reached JAM
Paper entry senor
ON
ON
The buffer sensor is not turned ON
within the specified time.
within the specified time.
688ms
FINISHER buffer sensor
remaining JAM
remaining JAM
Buffer sensor ON
The buffer sensor is not turned OFF
within the specified time.
within the specified time.
540ms
FINISHER paper exit sensor
not-reached JAM
not-reached JAM
Entry port sensor ON
The paper exit sensor is not turned
ON within the specified time.
ON within the specified time.
Straight path transport: 453ms
Buffer path transport: 815ms
Buffer path transport: 815ms
FINISHER paper exit sensor
remaining JAM
remaining JAM
Paper exit sensor ON
The paper exit sensor is not turned
OFF within the specified time.
OFF within the specified time.
840ms
FFPS_N
FINISHER saddle transport
path sensor not-reached JAM
path sensor not-reached JAM
Entry port sensor ON
The saddle transport path sensor is
not turned ON within the specified
time.
not turned ON within the specified
time.
914ms
FFPS_S
FINISHER saddle transport
path sensor remaining JAM
path sensor remaining JAM
Saddle transport path
sensor ON
sensor ON
The saddle transport path sensor is
not turned OFF within the specified
time.
not turned OFF within the specified
time.
996ms
FINISHER saddle paper exit
sensor not-reached JAM
sensor not-reached JAM
Folding edge sensor
ON (Completion of
thrust operation)
ON (Completion of
thrust operation)
The saddle transport sensor is not
turned ON though paper is
transported in the specified distance.
turned ON though paper is
transported in the specified distance.
180mm (Twice as much as the
normal distance)
normal distance)
FINISHER saddle paper exit
sensor remaining JAM
sensor remaining JAM
Saddle paper exit
sensor ON
sensor ON
The saddle paper exit sensor is not
turned OFF though paper is
transported in the specified distance.
turned OFF though paper is
transported in the specified distance.
209.25mm (1.5 times as much as the
normal distance)
normal distance)
FEXIT_S
FINISHER bundle exit
remaining JAM
remaining JAM
Start of bundle exit to
the stack tray
the stack tray
The staple tray sensor is not turned
OFF within the specified time.
OFF within the specified time.
1000ms
FSTPL
FINISHER Stacker staple
JAM
JAM
Start of stacker
stapling
stapling
When the staple HP sensor does not
sense ON within the specified time
from staple HP sensor OFF in
stapling process, and when the staple
HP sensor detects ON in reverse
rotation after stopping the stapler.
sense ON within the specified time
from staple HP sensor OFF in
stapling process, and when the staple
HP sensor detects ON in reverse
rotation after stopping the stapler.
500ms
FINISHER saddle staple JAM
Start of saddle
stapling
stapling
When the staple HP sensor does not
sense ON within the specified time
from stapler HP sensor OFF in
stapling process, and when the staple
HP sensor detects ON in reverse
rotation after stopping the stapler.
sense ON within the specified time
from stapler HP sensor OFF in
stapling process, and when the staple
HP sensor detects ON in reverse
rotation after stopping the stapler.
500ms
FPNCH
FINISHER punch JAM
Punch HP OFF after
starting punching
starting punching
The punch HP sensor does not turn
ON within the specified time.
ON within the specified time.
200ms
FDOP
FINISHER door open JAM
One of finisher doors
open
open
Finisher door open is detected in
finishing process.
finishing process.
---
AR-M550/M620/M700 OTHER 12 - 14
C. Finisher (AR-F15/F16) paper jam judgment conditions
JAM code
Content
JAM
detection method
JAM judgment time
(Stacker: LTR horizontal size
Saddle: LTR vertical size)
JAM detection timer
start trigger
JAM judge detector
Common to 55/62, 70PPM MODELS
(Main unit paper exit speed:
Stacker: 800mm/s
Saddle: 420mm/s)
Saddle: 420mm/s)
FES_N
FINISHER entry port sensor
not-reached JAM
not-reached JAM
Main unit paper exit
command reception
command reception
The paper entry sensor is not turned
ON within the specified time.
ON within the specified time.
500ms
FES_S
FINISHER entry port
remaining JAM
remaining JAM
Paper entry sensor
ON
ON
The paper entry sensor is not turned
OFF within the specified time.
OFF within the specified time.
540ms
FINISHER buffer sensor not-
reached JAM
reached JAM
Paper entry senor
ON
ON
The buffer sensor is not turned ON
within the specified time.
within the specified time.
688ms
FINISHER buffer sensor
remaining JAM
remaining JAM
Buffer sensor ON
The buffer sensor is not turned OFF
within the specified time.
within the specified time.
540ms
FINISHER paper exit sensor
not-reached JAM
not-reached JAM
Entry port sensor ON
The paper exit sensor is not turned
ON within the specified time.
ON within the specified time.
Straight path transport: 453ms
Buffer path transport: 815ms
Buffer path transport: 815ms
FINISHER paper exit sensor
remaining JAM
remaining JAM
Paper exit sensor ON
The paper exit sensor is not turned
OFF within the specified time.
OFF within the specified time.
840ms
FFPS_N
FINISHER saddle transport
path sensor not-reached JAM
path sensor not-reached JAM
Entry port sensor ON
The saddle transport path sensor is
not turned ON within the specified
time.
not turned ON within the specified
time.
914ms
FFPS_S
FINISHER saddle transport
path sensor remaining JAM
path sensor remaining JAM
Saddle transport path
sensor ON
sensor ON
The saddle transport path sensor is
not turned OFF within the specified
time.
not turned OFF within the specified
time.
996ms
FINISHER saddle paper exit
sensor not-reached JAM
sensor not-reached JAM
Folding edge sensor
ON (Completion of
thrust operation)
ON (Completion of
thrust operation)
The saddle transport sensor is not
turned ON though paper is
transported in the specified distance.
turned ON though paper is
transported in the specified distance.
180mm (Twice as much as the
normal distance)
normal distance)
FINISHER saddle paper exit
sensor remaining JAM
sensor remaining JAM
Saddle paper exit
sensor ON
sensor ON
The saddle paper exit sensor is not
turned OFF though paper is
transported in the specified distance.
turned OFF though paper is
transported in the specified distance.
209.25mm (1.5 times as much as the
normal distance)
normal distance)
FEXIT_S
FINISHER bundle exit
remaining JAM
remaining JAM
Start of bundle exit to
the stack tray
the stack tray
The staple tray sensor is not turned
OFF within the specified time.
OFF within the specified time.
1000ms
FSTPL
FINISHER Stacker staple
JAM
JAM
Start of stacker
stapling
stapling
When the staple HP sensor does not
sense ON within the specified time
from staple HP sensor OFF in
stapling process, and when the staple
HP sensor detects ON in reverse
rotation after stopping the stapler.
sense ON within the specified time
from staple HP sensor OFF in
stapling process, and when the staple
HP sensor detects ON in reverse
rotation after stopping the stapler.
500ms
FINISHER saddle staple JAM
Start of saddle
stapling
stapling
When the staple HP sensor does not
sense ON within the specified time
from stapler HP sensor OFF in
stapling process, and when the staple
HP sensor detects ON in reverse
rotation after stopping the stapler.
sense ON within the specified time
from stapler HP sensor OFF in
stapling process, and when the staple
HP sensor detects ON in reverse
rotation after stopping the stapler.
500ms
FPNCH
FINISHER punch JAM
Punch HP OFF after
starting punching
starting punching
The punch HP sensor does not turn
ON within the specified time.
ON within the specified time.
200ms
FDOP
FINISHER door open JAM
One of finisher doors
open
open
Finisher door open is detected in
finishing process.
finishing process.
---