DOWNLOAD Sharp AR-M700 (serv.man27) Service Manual ↓ Size: 948.19 KB | Pages: 97 in PDF or view online for FREE

Model
AR-M700 (serv.man27)
Pages
97
Size
948.19 KB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Simulation
File
ar-m700-sm27.pdf
Date
PREV: Sharp AR-M700 (serv.man26) Service Manual

Sharp AR-M700 (serv.man27) Service Manual ▷ View online

AR-M550/M620/M700  SIMULATION  8 - 53
Operation/Procedure
1) Select the number corresponding to the copy density adjustment
level with 10-key. (Select one of 3 - 11.) 
2) Press [START] key. 
3) Enter the copy density level with 10-key.
4) Press [P] key or [START] key.
The adjustment value is set.
When [START] key is pressed, copying is perfumed and the
adjustment value is set simultaneously.
Check the density of printed copy image.
To select paper (paper feed tray), perform the following procedures.
1) Enter 0 with 10-key.
2) Press [START] key. (The mode is changed to the paper feed tray
selection mode.)
3) Enter the number corresponding to the paper feed tray to be used
with 10-key.
4) Press [START] key. (The paper feed tray is selected.)
NOTE: When [P] key is pressed after entering an adjustment value in
this simulation, the adjustment value is set. When START key
is pressed, the adjustment value is set and copying is per-
formed.
Select 2, and press [START] key.
Press [START] key, or 
press [CUSTOM SETTINGS] key.
SIMULATION 46-10
Select other than 0 - 2, and 
press [START] key. 
Press [CUSTOM SETTINGS] key.
SIMULATION 46-10
EXP. LEVEL SETUP (MIX.2). INPUT VALUE 0-99, AND PRESS
START.
3. 1.0
Press [START] key. 
SIMULATION 46-10
EXP. LEVEL SETUP (MIX.2). NOW COPYING.
50
Press [CUSTOM SETTINGS] key, 
or terminate copying.
SIMULATION 46-10
EXP. LEVEL SETUP (MIX.2). SELECT 1-6, AND PRESS START.
(FEED TRAY)
  1. TRAY1  2. TRAY2  3. TRAY3  4. TRAY4
  5. BPT    6. LCC
Press [START] key, or 
press [CUSTOM SETTING] key.
1
Select 0, and 
press [START] key.
1
Select 1, 
and press 
[START] key. 
EXP. LEVEL SETUP (MIX.2). SELECT 0-11, AND PRESS START.
0. TRAY SELECT 
1
  1. COPY START
2. EXP LEVEL 
1
3. 1.0 
50
  4. 1.5 
50
  5. 2.0 
50
6. 2.5 
50
  7. 3.0 
50
  8. 3.5 
50
9. 4.0 
50
  10. 4.5 
50
 11. 5.0 
50
SIMULATION 46-10
EXP. LEVEL SETUP (MIX.2). SELECT 3-11, AND PRESS START.
(EXP. LEVEL SELECT)
3. 1.0     4. 1.5     5. 2.0
6. 2.5     7. 3.0     8. 3.5
9. 4.0     10. 4.5    11. 5.0
1
46-11
Purpose
Adjustment
Function
(Purpose)
Used to adjust the print density for each density level 
(display value) in the copy mode (binary - Photo 
mode). An optional print density can be set for each 
density level (display value).
Section
Item
Picture quality
Density
Item
Set 
range
Default
0
TRAY SELECT
Paper feed tray selection
1
COPY START
Copy START (Default)
2
EXP LEVEL
Exposure level selection
3
1.0
Exposure level 1.0
0 - 99
50
4
1.5
Exposure level 1.5
5
2.0
Exposure level 2.0
6
2.5
Exposure level 2.5
7
3.0
Exposure level 3.0
8
3.5
Exposure level 3.5
9
4.0
Exposure level 4.0
10
4.5
Exposure level 4.5
11
5.0
Exposure level 5.0
Normal display
NOW COPYING.
ERROR display
Door open
DOOR OPEN.
Jam
JAM
Paper empty
PAPER EMPTY.
1
TRAY1
TRAY1
2
TRAY2
TRAY2
3
TRAY3
TRAY3
4
TRAY4
TRAY4
5
BPT
Manual feed
6
LCC
Side LCC
AR-M550/M620/M700  SIMULATION  8 - 54
Operation/Procedure
1) Select the adjustment item of FAX EXP. LEVEL with 10-key.
2) Press [START] key. 
3) Enter the print density level with 10-key.
4) Press [P] key or [START] key. 
The adjustment value is set. 
When [START] key is pressed, printing is perfumed and the adjust-
ment value is set simultaneously.
Check the density of printed image.
NOTE: When the FAX print image density is adjusted with this simula-
tion, the print image densities of all the FAX modes are
changed to the image density level set with this simulation.
That is, the print image density of each FAX mode set with SIM
46-13, 14, 15 is changed to the print image density level
adjusted with this simulation.
To select paper (paper feed tray), perform the following procedures.
1) Enter 0 with 10-key.
2) Press [START] key. (The mode is changed to the paper feed tray
selection mode.)
3) Enter the number corresponding to the paper feed tray to be used
with 10-key.
4) Press [START] key. (The paper feed tray is selected.)
NOTE: When [P] key is pressed after entering an adjustment value in
this simulation, the adjustment value is set. When START key
is pressed, the adjustment value is set and copying is per-
formed.
Select 2, and press [START] key.
Press [START] key, or 
press [CUSTOM SETTINGS] key.
46-12
Purpose
Adjustment
Function
(Purpose)
Used to adjust the print density in the FAX mode (all 
modes). 
Section
Item
Picture quality
Item
Set 
range
Default
0
TRAY SELECT
Paper feed tray selection
1
COPY START
Copy START (Default)
2
FAX EXP. LEVEL
FAX mode print density
0 - 99
50
Normal display
NOW PRINTING.
ERROR display
Door open
DOOR OPEN.
Jam
JAM
Paper empty
PAPER EMPTY.
SIMULATION 46-11
Select other than 0 - 2, and 
press [START] key. 
Press [CUSTOM SETTINGS] key.
SIMULATION 46-11
EXP. LEVEL SETUP (PHOTO2). INPUT VALUE 0-99, AND PRESS
START.
3. 1.0
Press [START] key. 
SIMULATION 46-11
EXP. LEVEL SETUP (PHOTO2). NOW COPYING.
50
Press [CUSTOM SETTINGS] key, 
or terminate copying.
SIMULATION 46-11
EXP. LEVEL SETUP (PHOTO2). SELECT 1-6, AND PRESS START.
(FEED TRAY)
  1. TRAY1  2. TRAY2  3. TRAY3  4. TRAY4
  5. BPT    6. LCC
Press [START] key, 
or press [CUSTOM SETTING] key.
1
Select 0, and 
press [START] key.
1
Select 1, 
and press
[START] key. 
EXP. LEVEL SETUP (PHOTO2). SELECT 0-11, AND PRESS START.
0. TRAY SELECT 
1
  1. COPY START
2. EXP LEVEL 
1
3. 1.0 
50
  4. 1.5 
50
  5. 2.0 
50
6. 2.5 
50
  7. 3.0 
50
  8. 3.5 
50
9. 4.0 
50
  10. 4.5 
50
 11. 5.0 
50
SIMULATION 46-11
EXP. LEVEL SETUP (PHOTO2). SELECT 3-11, AND PRESS START.
(EXP. LEVEL SELECT)
3. 1.0     4. 1.5     5. 2.0
6. 2.5     7. 3.0     8. 3.5
9. 4.0     10. 4.5    11. 5.0
1
1
TRAY1
TRAY1
2
TRAY2
TRAY2
3
TRAY3
TRAY3
4
TRAY4
TRAY4
5
BPT
Manual feed
6
LCC
Side LCC
Select 0, and 
press [START] key.
Press [START] key, or 
press [CUSTOM SETTINGS] key.
SIMULATION 46-12
EXP.LEVEL SETUP FAX(AUTO SET). SELECT 0-2, AND PRESS 
START.
0.TRAY SELECT 
1
 1.COPY START
2.FAX EXP.LEVEL 
50
Press [CUSTOM SETTINGS] key. 
SIMULATION 46-12
EXP.LEVEL SETUP FAX(AUTO SET), INPUT VALUE 0-99, AND
PRESS START.
2.FAX EXP.LEVEL
50
1
Press [START] key.
Press [CUSTOM SETTINGS] key, 
or terminate copying.
SIMULATION 46-12
EXP.LEVEL SETUP FAX(AUTO SET). NOW PRINTING.
Select 1, and 
press [START] key.
Select other than 0 - 1, and 
press [START] key. 
SIMULATION 46-12
EXP.LEVEL SETUP FAX(AUTO SET).SELECT 1-6, AND PRESS
START.
(FEED TRAY)
 1.TRAY1 2.TRAY2 3.TRAY3 4.TRAY4
 5.BPT   6.LCC
AR-M550/M620/M700  SIMULATION  8 - 55
Operation/Procedure
1) Select the number corresponding to one of the following adjust-
ment items with 10-key.
∗
Manual mode (Print density adjustment level)
∗
Auto mode
2)  Press [START] key.
3) Enter the print density level with 10-key.
4) Press [P] key or [START] key.
The adjustment value is set.
When [START] key is pressed, printing is perfumed and the adjust-
ment value is set simultaneously.
Check the density of printed image.
To select paper (paper feed tray), perform the following procedures.
1) Enter 0 with 10-key. 
2) Press [START] key. (The mode is changed to the paper feed tray
selection mode.)
3) Enter the number corresponding to the paper feed tray to be used
with 10-key. 
4) Press [START] key. (The paper feed tray is selected.)
When the sum of the above set value (1 - 6) and 20 is set, the mode is
changed to the duplex print mode. 
NOTE: When [P] key is pressed after entering an adjustment value in
this simulation, the adjustment value is set. When START key
is pressed, the adjustment value is set and copying is per-
formed.
Operation/Procedure
1) Select the number corresponding to one of the following adjust-
ment items with 10-key. (Select one of 3 - 14.)
∗
Normal mode (Print density adjustment level)
∗
Normal mode (Print density adjustment level) (Half-tone mode)
∗
Auto mode
∗
Auto mode (Half-tone mode)
46-13
Purpose
Adjustment
Function
(Purpose)
Used to adjust the print density in the FAX mode (each 
normal mode). (Only when FAX is installed.)
Section
Item
Picture quality
Item
Set 
range
Default
0
TRAY 
SELECT
Paper feed tray selection
1
PRINT START
Print start (Default)
2
EXP LEVEL
Exposure level selection
3
AUTO
Auto
0 - 99
50
4
1.0
Exposure level 1
5
2.0
Exposure level 2
6
3.0
Exposure level 3
7
4.0
Exposure level 4
8
5.0
Exposure level 5
Normal display
NOW PRINTING.
ERROR display
Door open
DOOR OPEN.
Jam
JAM
Paper empty
PAPER EMPTY.
1
TRAY1
TRAY1
2
TRAY2
TRAY2
3
TRAY3
TRAY3
4
TRAY4
TRAY4
5
BPT
Manual feed
6
LCC
Side LCC
Select 2, and 
press [START] key.
Press [START] key, or 
press [CUSTOM SETTINGS] key.
46-14
Purpose
Adjustment
Function
(Purpose)
Used to adjust the print density in the FAX mode (each 
fine mode). (Only when FAX is installed.)
Section
Item
Picture quality
SIMULATION 46-13
EXP.LEVEL SETUP FAX(NORMAL). SELECT 0-8, AND PRESS 
START.
0.TRAY SELECT 
1
 1.PRINT START
2.EXP LEVEL 
1
3.AUTO    
50
   4.1.0  
50 
  5.2.0  
50
6.3.0  
50
      7.4.0  
50
   8.5.0  
50
50
1
1
Select 1, 
and press 
[START] key.
Select 0, and press [START] key.
SIMULATION 46-13
EXP.LEVEL SETUP FAX(NORMAL),INPUT VALUE 0-99, AND
PRESS START.
4.1.0
SIMULATION 46-13
EXP.LEVEL SETUP FAX(NORMAL). NOW PRINTING.
SIMULATION 46-13
EXP.LEVEL SETUP FAX(NORMAL). SELECT 1-6, AND PRESS
START.
(FEED TRAY)
   1.TRAY1 2.TRAY2 3.TRAY3 4.TRAY4
   5.BPT   6.LCC
(ABOVE +20:DSPF MODE) 
Select other than 0 - 2, 
and press [START] key.  Press [CUSTOM SETTINGS] key. 
Press [START] key. 
Press [CUSTOM SETTINGS] key, 
or terminate copying.
Press [START] key, or 
press [CUSTOM SETTINGS] key.
1
SIMULATION 46-13
EXP.LEVEL SETUP FAX(NORMAL). SELECT 3-8, AND PRESS START.
(EXP.LEVEL SELECT)
3.AUTO       4.1.0       5.2.0
6.3.0        7.4.0       8.5.0
AR-M550/M620/M700  SIMULATION  8 - 56
2) Enter the print density level with 10-key.
3) Press [P] key or [ATART] key.
The entered value is set.
When [START] key is pressed, printing is performed and the
adjustment value is set simultaneously.
Check the density of print image.
To select paper (paper feed tray), perform the following procedures.
1) Enter 0 with 10-key.
2) Press [START] key. (The mode is changed to the paper feed tray
selection mode.)
3) Enter the number corresponding to the paper feed tray to be used
with 10-key.
4) Press [START] key. (The paper feed tray is selected.)
NOTE: When [P] key is pressed after entering an adjustment value in
this simulation, the adjustment value is set. When START key
is pressed, the adjustment value is set and copying is per-
formed.
Operation/Procedure
1) Select the number corresponding to one of the following adjust-
ment items with 10-key. (Select one of 3 - 14.)
∗
Normal mode (Print density adjustment level)
∗
Normal mode (Print density adjustment level) (Half-tone mode)
∗
Auto mode
∗
Auto mode (Half-tone mode)
2) Press [START] key.
Item
Set 
range
Default
0
TRAY SELECT
Paper feed tray selection
1
PRINT START
Print start (Default)
2
EXP LEVEL
Exposure level selection
3
AUTO
Auto
0 - 99
50
4
1.0
Exposure level 1
5
2.0
Exposure level 2
6
3.0
Exposure level 3
7
4.0
Exposure level 4
8
5.0
Exposure level 5
9
AUTO (H)
Auto (Half-tone)
10
1.0 (H)
Exposure level 1 (Half-tone)
11
2.0 (H)
Exposure level 2 (Half-tone)
12
3.0 (H)
Exposure level 3 (Half-tone)
13
4.0 (H)
Exposure level 4 (Half-tone)
14
5.0 (H)
Exposure level 5 (Half-tone)
Normal display
NOW PRINTING.
ERROR display
Door open
DOOR OPEN.
Jam
JAM
Paper empty
PAPER EMPTY.
1
TRAY1
TRAY1
2
TRAY2
TRAY2
3
TRAY3
TRAY3
4
TRAY4
TRAY4
5
BPT
Manual feed
6
LCC
Side LCC
Select 2, and 
press [START] key.
Press [START] key or 
press [CUSTOM SETTINGS] key. 
46-15
Purpose
Adjustment
Function
(Purpose)
Used to adjust the print density in the FAX mode (each 
super fine mode). (Only when FAX is installed.)
Section
Item
Picture quality
50
1
1
Select 1, 
and press 
[START] key.
Select other than 0 - 2, 
and press [START] key. 
Press [CUSTOM SETTINGS] key.
Press [START] key.
Press [CUSTOM SETTINGS] key, 
or terminate copying.
SIMULATION 46-14
EXP.LEVEL SETUP FAX(FINE).SELECT 0-14,AND PRESS START.
0.TRAY SELECT 
1 
 1.PRINT START
2.EXP LEVEL 
1
3.AUTO    
50
   4.1.0  
50 
  5.2.0  
50
6.3.0  
50
      7.4.0  
50
   8.5.0  
50
9.AUTO(H)   
50
   10.1.0(H) 
50
      11.2.0(H) 
50
12.3.0(H)  
50
    13.4.0(H) 
50
      14.5.0(H) 
50
SIMULATION 46-14
EXP.LEVEL SETUP FAX(FINE),INPUT VALUE 0-99, AND PRESS
START.
4.1.0
Select 0, and press [START] key.
SIMULATION 46-14
EXP.LEVEL SETUP FAX(FINE). NOW PRINTING.
SIMULATION 46-14
EXP.LEVEL SETUP FAX(FINE). SELECT 1-6, AND PRESS START.
(FEED TRAY)
   1.TRAY1 2.TRAY2 3.TRAY3 4.TRAY4
   5.BPT   6.LCC
Press [START] key, 
or press [CUSTOM SETTINGS] key.
1
SIMULATION 46-14
EXP.LEVEL SETUP FAX(FINE). SELECT 3-14, AND PRESS START.
(EXP.LEVEL SELECT)
3.AUTO     4.1.0     5.2.0
6.3.0      7.4.0     8.5.0
9.AUTO(H)    10.1.0(H)     11.2.0(H)
12.3.0(H)    13.4.0(H)     14.5.0(H)
Page of 97
Display

Click on the first or last page to see other AR-M700 (serv.man27) service manuals if exist.

RANDOM: